Heat Power Equipment Sample Tests Using Time-Series Techniques

Trukhanov Vladimir Mihailovich; Sultanov Makhsud Мansurovich; Gorban' Yuliya Anatolyevna; Kukhtik Mikhail Petrovich

doi:doi:10.11648/j.epes.20180706.11

| Peer-Reviewed

Heat Power Equipment Sample Tests Using Time-Series Techniques

Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich

Published in American Journal of Electrical Power and Energy Systems (Volume 7, Issue 6)

Received: 4 November 2018 Accepted: 17 December 2018 Published: 23 January 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.

Published in	American Journal of Electrical Power and Energy Systems (Volume 7, Issue 6)
DOI	10.11648/j.epes.20180706.11
Page(s)	68-78
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Test Amount Planning, Components, Reliability, Distribution Law

References

[1]	Sultanov M. M. Assessment of reliability, extension of service life and optimization of repair of thermal power plant equipment and power systems. –Volzhsky: Volzhsky branch of MPEI , 2016.–100 p.
[2]	Lloyd D., Lipov M. Reliability. –M.: Soviet radio, 1964. – 687 p.
[3]	Reliability and efficiency in engineering. T. 1. Methodology. Organization. Terminology/ Under edition A. I. Rembezy. – M.: Engineering, 1986. – 224 p.
[4]	Reliability and efficiency in engineering. T. 6. Experimental testing/ Under edition R. S. Sudakova, O. I. Teskina. – M.: Engineering, 1989. – 376 p.
[5]	Sultanov M. M., Truhanov V. M. Mathematical model of change of output operational characteristics of steam turbines of TPP // The reliability and security of energy. –2017. – T. 10, №1. – p. 42-47.
[6]	TruhanovV. M. Reliability of engineering products. Theory and practice: textbook. – 2nd edition, revised and supplemented/ V. M. Truhanov.–M.: Edition «Spektr», 2013. – 334 p.
[7]	RD50-650-87. Methodical instructions. Reliability in technology. Composition and general rules for setting reliability requirements. – M.: Edition of standards, 1988. – 23 p.
[8]	RD 50-109-89. Recommendations. Reliability in technology. Ensuring product reliability. Ensuring requirements. –M.: Edition of standards, 1989. – 16 p.
[9]	Truhanov V. M. Reliability in technology. M.: Edition «Spektr», 2017. – 634 p.
[10]	Sultanov M. M., Truhanov V. M., Arakelyan E. K., Kulikova M. A. Methods of achieving and ensuring a high level of reliability and safety of power equipment of TPP, HPP, NPP at all stages of the life cycle, ISSN: 2312-055X, 2018. – 6-14 p.
[11]	Truhanov V. N., Sultanov M. M. Estimation technique of corrective effects for forecasting of reliability of the designed and operated objects of the generating systems, ISSN: 1742-6596, 2017.–1-13 p.
[12]	Truhanov V. M., Sultanov M. M., Kukhtik M. P., Gorban Yu. A. Mathematical model of predicting of failures by statistical method at testing of prototypes of heat-power equipment of power supply systems of TEHS// The reliability and security of energy. – 2018. – T. 11, № 3. – p. 235-240.
[13]	Suleimenov B. A., Sugurova L. A., Suleimenov A. B., Suleimenov A. B., Zhirnova O. V. Synthesis of the equipment health management system of the turbine units' of thermal powerstations.–MECHANICS & INDUSTRY, 2018.
[14]	Agrawal V., Panigrahi B. K., Subbarao P. M. V. Increasing Reliability of Fault Detection Systems for Industrial Applications.–IEEE INTELLIGENT SYSTEMS, 2018.
[15]	Salomon D., Motta G. Handbook of data compression.–Springer Science & Business Media, 2010.

Cite This Article

Plain Text BibTeX RIS

APA Style

Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich. (2019). Heat Power Equipment Sample Tests Using Time-Series Techniques. American Journal of Electrical Power and Energy Systems, 7(6), 68-78. https://doi.org/10.11648/j.epes.20180706.11

Copy | Download

ACS Style

Trukhanov Vladimir Mihailovich; Sultanov Makhsud Мansurovich; Gorban' Yuliya Anatolyevna; Kukhtik Mikhail Petrovich. Heat Power Equipment Sample Tests Using Time-Series Techniques. Am. J. Electr. Power Energy Syst. 2019, 7(6), 68-78. doi: 10.11648/j.epes.20180706.11

Copy | Download

AMA Style

Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich. Heat Power Equipment Sample Tests Using Time-Series Techniques. Am J Electr Power Energy Syst. 2019;7(6):68-78. doi: 10.11648/j.epes.20180706.11

Copy | Download

@article{10.11648/j.epes.20180706.11,
  author = {Trukhanov Vladimir Mihailovich and Sultanov Makhsud Мansurovich and Gorban' Yuliya Anatolyevna and Kukhtik Mikhail Petrovich},
  title = {Heat Power Equipment Sample Tests Using Time-Series Techniques},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {7},
  number = {6},
  pages = {68-78},
  doi = {10.11648/j.epes.20180706.11},
  url = {https://doi.org/10.11648/j.epes.20180706.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20180706.11},
  abstract = {The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Heat Power Equipment Sample Tests Using Time-Series Techniques
AU  - Trukhanov Vladimir Mihailovich
AU  - Sultanov Makhsud Мansurovich
AU  - Gorban' Yuliya Anatolyevna
AU  - Kukhtik Mikhail Petrovich
Y1  - 2019/01/23
PY  - 2019
N1  - https://doi.org/10.11648/j.epes.20180706.11
DO  - 10.11648/j.epes.20180706.11
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 68
EP  - 78
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20180706.11
AB  - The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.
VL  - 7
IS  - 6
ER  -

Copy | Download

Author Information

Trukhanov Vladimir Mihailovich

Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia; Department of Automation of Manufacturing Processes, Volgograd State Technical University, Volgograd, Russia
Sultanov Makhsud Мansurovich

Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia
Gorban' Yuliya Anatolyevna

Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia
Kukhtik Mikhail Petrovich

Department of Automation of Manufacturing Processes, Volgograd State Technical University, Volgograd, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich. (2019). Heat Power Equipment Sample Tests Using Time-Series Techniques. American Journal of Electrical Power and Energy Systems, 7(6), 68-78. https://doi.org/10.11648/j.epes.20180706.11

Copy | Download

ACS Style

Trukhanov Vladimir Mihailovich; Sultanov Makhsud Мansurovich; Gorban' Yuliya Anatolyevna; Kukhtik Mikhail Petrovich. Heat Power Equipment Sample Tests Using Time-Series Techniques. Am. J. Electr. Power Energy Syst. 2019, 7(6), 68-78. doi: 10.11648/j.epes.20180706.11

Copy | Download

AMA Style

Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich. Heat Power Equipment Sample Tests Using Time-Series Techniques. Am J Electr Power Energy Syst. 2019;7(6):68-78. doi: 10.11648/j.epes.20180706.11

Copy | Download

@article{10.11648/j.epes.20180706.11,
  author = {Trukhanov Vladimir Mihailovich and Sultanov Makhsud Мansurovich and Gorban' Yuliya Anatolyevna and Kukhtik Mikhail Petrovich},
  title = {Heat Power Equipment Sample Tests Using Time-Series Techniques},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {7},
  number = {6},
  pages = {68-78},
  doi = {10.11648/j.epes.20180706.11},
  url = {https://doi.org/10.11648/j.epes.20180706.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20180706.11},
  abstract = {The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Heat Power Equipment Sample Tests Using Time-Series Techniques
AU  - Trukhanov Vladimir Mihailovich
AU  - Sultanov Makhsud Мansurovich
AU  - Gorban' Yuliya Anatolyevna
AU  - Kukhtik Mikhail Petrovich
Y1  - 2019/01/23
PY  - 2019
N1  - https://doi.org/10.11648/j.epes.20180706.11
DO  - 10.11648/j.epes.20180706.11
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 68
EP  - 78
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20180706.11
AB  - The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.
VL  - 7
IS  - 6
ER  -

Copy | Download