Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine

Pushpalata Khalkho; Arvind Kumar Singh

doi:doi:10.11648/j.epes.20140302.15

| Peer-Reviewed

Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine

Pushpalata Khalkho, Arvind Kumar Singh

Published in American Journal of Electrical Power and Energy Systems (Volume 3, Issue 2)

Received: 15 February 2014 Accepted: 11 April 2014 Published: 20 April 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed

Published in	American Journal of Electrical Power and Energy Systems (Volume 3, Issue 2)
DOI	10.11648/j.epes.20140302.15
Page(s)	45-49
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Power System Stabilizer, ETAP-Software, Transient Stability, Three Phase Fault

References

[1]	Kundur, P., Power system stability and control, McGraw-Hill, New York, 1994.
[2]	P. Kundur, M. Klein, G.J. Rogers, and M.S. Zywno, “ Application of power system stabilizers for Enhancement of overall system stability,” IEEE Trans., Vol. PWRS-4, No.2, PP.614- 626,May 1989.
[3]	P. Kundur, D.C. Lee and H.M. Zein EL-Din,” Power system stabilizer for thermal units: Analytical Techniques and on-site Validation,” IEEE Trans., Vol.PAS-100,PP.81-95,January 1981.
[4]	IEEE Committee Report “Proposed Excitation system Definition for synchronous machine,” IEEE Trans., Vol. PAS- 88, PP.1228-1258,August 1969.
[5]	IEEE/CIGRE Joint task force on stability terms and definitions, ‘Definition and classification of Power System Stability,’ IEEE trans. Power System, Vol. 19,No.2, PP. 1387-1401, May 2004.
[6]	IEEE standard Definitions for excitation system for synchronous machines IEEE standard.
[7]	Kamwa I. ,Grandin R. and Trudal G. , ‘IEEE PSS2B versus PSS4B: The limit of performance of modem Power System Stabilizers, IEEE Trans. Power System, Vol., NO.2,PP.903-915,May 2005.
[8]	P. Kundur and D.C lee “Advanced excitation control for power system stability Enhancement,” CIGRE Paper 38- 01, paris, France 1986.
[9]	E. W. Kimbark, power system stability, Vol.3: Synchronous machines Jon Wiley &Sons,1956.
[10]	P.K. Iyambo, R. Tzonova, “Transient Stability Analysis of the IEEE 14-Bus Electrical Power System”, IEEE Conf. 2007
[11]	K.R. Padiyar, ‘Power system Dynamics-Stability and control,’ second Edition, (Hyderabad), B.S. Publication, 2002.
[12]	IEEE Task force, “Proposed terms and Definition for power system stability,” IEEE trans.,Vol.PAS-101,pp.1894-1898, July 1982.
[13]	F.P. deMello and C. Corcordia, “Concepta of Synchronous Machine Stability as Affected by Excitation control,” IEEE Trans., Vol. PAS-88, PP.316-329, April 1969.

Cite This Article

Plain Text BibTeX RIS

APA Style

Pushpalata Khalkho, Arvind Kumar Singh. (2014). Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. American Journal of Electrical Power and Energy Systems, 3(2), 45-49. https://doi.org/10.11648/j.epes.20140302.15

Copy | Download

ACS Style

Pushpalata Khalkho; Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am. J. Electr. Power Energy Syst. 2014, 3(2), 45-49. doi: 10.11648/j.epes.20140302.15

Copy | Download

AMA Style

Pushpalata Khalkho, Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am J Electr Power Energy Syst. 2014;3(2):45-49. doi: 10.11648/j.epes.20140302.15

Copy | Download

@article{10.11648/j.epes.20140302.15,
  author = {Pushpalata Khalkho and Arvind Kumar Singh},
  title = {Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {3},
  number = {2},
  pages = {45-49},
  doi = {10.11648/j.epes.20140302.15},
  url = {https://doi.org/10.11648/j.epes.20140302.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20140302.15},
  abstract = {The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine
AU  - Pushpalata Khalkho
AU  - Arvind Kumar Singh
Y1  - 2014/04/20
PY  - 2014
N1  - https://doi.org/10.11648/j.epes.20140302.15
DO  - 10.11648/j.epes.20140302.15
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 45
EP  - 49
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20140302.15
AB  - The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed
VL  - 3
IS  - 2
ER  -

Copy | Download

Author Information

Pushpalata Khalkho

Electrical Engg. Deptt. B.I.T Sindri, Dhanbad, Govt. of Jharkhand-828123, India
Arvind Kumar Singh

Electrical Engg. Deptt. B.I.T Sindri, Dhanbad, Govt. of Jharkhand-828123, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Pushpalata Khalkho, Arvind Kumar Singh. (2014). Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. American Journal of Electrical Power and Energy Systems, 3(2), 45-49. https://doi.org/10.11648/j.epes.20140302.15

Copy | Download

ACS Style

Pushpalata Khalkho; Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am. J. Electr. Power Energy Syst. 2014, 3(2), 45-49. doi: 10.11648/j.epes.20140302.15

Copy | Download

AMA Style

Pushpalata Khalkho, Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am J Electr Power Energy Syst. 2014;3(2):45-49. doi: 10.11648/j.epes.20140302.15

Copy | Download

@article{10.11648/j.epes.20140302.15,
  author = {Pushpalata Khalkho and Arvind Kumar Singh},
  title = {Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {3},
  number = {2},
  pages = {45-49},
  doi = {10.11648/j.epes.20140302.15},
  url = {https://doi.org/10.11648/j.epes.20140302.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20140302.15},
  abstract = {The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine
AU  - Pushpalata Khalkho
AU  - Arvind Kumar Singh
Y1  - 2014/04/20
PY  - 2014
N1  - https://doi.org/10.11648/j.epes.20140302.15
DO  - 10.11648/j.epes.20140302.15
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 45
EP  - 49
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20140302.15
AB  - The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed
VL  - 3
IS  - 2
ER  -

Copy | Download