International Journal of Energy and Power Engineering

| Peer-Reviewed |

Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques

Received: 01 May 2013    Accepted:     Published: 10 June 2013
Views:       Downloads:

Share This Article

Abstract

This paper proposes a dual mode used to control a single phase soft switching boost power factor correction Converter (PFC) developed with a new active snubber circuit. The soft switched boost power factor correction converter has merits of less voltage and current stresses, improved efficiency and reduced switching losses. Thus the cost and complexity of the converter is reduced. The dual mode controller combines both continuous conduction mode (CCM) and critical conduction mode (CRM). The simulation results declare high efficiency and optimum power factor for wide range of varying loads.

DOI 10.11648/j.ijepe.20130203.11
Published in International Journal of Energy and Power Engineering (Volume 2, Issue 3, June 2013)
Page(s) 90-96
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Power Factor Correction(PFC), Soft Switching(SS), Zero-Current Switching(ZCS), Zero-Voltage Switching(ZVS), Zero-Current Transition(ZCT), Zero-Voltage Transition(ZVT)

References
[1] G. Seguier, Power Electronic Converters AC/DC conversion. New York: McGraw Hill, 1986.
[2] E. Masek, E. Dede, G. Hua and F.C. Lee, "100 KHz 2kW boost ZVT-PWM converter for power-factor correction," in Pro. IEEE CIEP’93, pp. 102-106, 1993.
[3] J. W. Kim, S. M. Choi, and K. T. Kim, "Variable on-time control of the critical conduction mode boost power factor correction converter to improve zero-crossing detection", in Proc. IEEEPEDS, Nov. 2005, pp. 1542-1546.
[4] R. L. Lin, Y. Zhao, F.C. Lee, "Improved soft-switching ZVT converters with active snubber," in Appl. Power Electron. Conf. Exposition IEEE, vol.2, pp.1063-1069, Feb. 1998.
[5] Elasser and D.A. Torrey, "Soft switching active snubbers for dc/dc converters,"IEEE Trans. Power Electron., vol. 11, pp. 710-722, Sept. 1996.
[6] BurakAkin and HaziBodur, "A new single-phase soft-switching power factor correction converter," IEEE Trans. Power Electron., vol.26, no.2, pp.436-443, Feb. 2011.
[7] C. M. Wang, "A novel zero-voltage switching PWM boost rectifier with high power factor and low conduction losses," IEEE Trans. Ind. Electron., vol.52, no.2, pp.427-435, Apr. 2005.
[8] E. H. Ismail, A. J. Sabzali and M. A. Al-Saffar, "A high-quality rectifier based on Sheppard-Taylor converter operating in discontinuous capacitor voltage mode," IEEE Trans. Ind. Electron., vol.55, no.1, pp.38-48, Jan. 2008.
[9] E. Martinez and P.N Enjeti, "A high-performance single-phase rectifier with input power factor correction," IEEE Trans. Power Electron., vol.11, pp.311-317, July. 1996.
[10] H. Bodur and A.F. Bakan, "A new ZVT-ZCT-PWM DC-DC converter," IEEE Trans. Power Electron., vol.19, no.3, pp.676-684, Jan 2002.
[11] J. G. Cho, J. W. Baek, G. H. Ron, I. Kang, "Novel zero voltage transition PWM multiphase converters," IEEE Trans. Power Electron., vol.13, pp.152-159, Jan. 1998.
[12] R. T. H. Li, H.S.H. Chang and A.K.T Sing, "Passive lossless snubber for boost PFC with minimum voltage and current stress," IEEE Trans. Power Electron., vol.25, no.3, pp.602-613, Mar. 2010.
[13] S. Wall and R. Jackson, "Fast controller design for single-phase power-factor correction systems," IEEE Trans. Ind. Electron., vol.44, no.5, pp.654-660, Oct. 19997.
[14] T.C. Chen and C.T. Pan, "Modeling and design of a single-phase ac to dc converters," Proc. Inst. Elect., vol.136, pp. 465-470, Sept. 1992.
[15] V. Vorperian, "Quasi-square wave converters: Topologies and analysis." IEEE Trans. Power Electron., vol.3, no.2, pp. 183-191, Apr.1988.
[16] Y. Jang, M.M. Jovanovic, K.H. Fang and Y.M. Chang, "High-power-factor soft-switched boost converter" IEEE Trans. Power Electron., vol.21, no.1, pp.98-104, Jan. 2001.
Author Information
  • Dept. Of EEE, Associate Professor, PSNACET, Dindigul, Tamilnadu, India

  • Dept. Of EEE, Associate Professor, PSNACET, Dindigul, Tamilnadu, India

  • Dept. Of EEE, PSNACET, Dindigul, Tamilnadu, India

Cite This Article
  • APA Style

    J. Velmurugan, R. M. Sekar, Jojina anna varghese. (2013). Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques. International Journal of Energy and Power Engineering, 2(3), 90-96. https://doi.org/10.11648/j.ijepe.20130203.11

    Copy | Download

    ACS Style

    J. Velmurugan; R. M. Sekar; Jojina anna varghese. Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques. Int. J. Energy Power Eng. 2013, 2(3), 90-96. doi: 10.11648/j.ijepe.20130203.11

    Copy | Download

    AMA Style

    J. Velmurugan, R. M. Sekar, Jojina anna varghese. Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques. Int J Energy Power Eng. 2013;2(3):90-96. doi: 10.11648/j.ijepe.20130203.11

    Copy | Download

  • @article{10.11648/j.ijepe.20130203.11,
      author = {J. Velmurugan and R. M. Sekar and Jojina anna varghese},
      title = {Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques},
      journal = {International Journal of Energy and Power Engineering},
      volume = {2},
      number = {3},
      pages = {90-96},
      doi = {10.11648/j.ijepe.20130203.11},
      url = {https://doi.org/10.11648/j.ijepe.20130203.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20130203.11},
      abstract = {This paper proposes a dual mode used to control a single phase soft switching boost power factor correction Converter (PFC) developed with a new active snubber circuit. The soft switched boost power factor correction converter has merits of less voltage and current stresses, improved efficiency and reduced switching losses. Thus the cost and complexity of the converter is reduced. The dual mode controller combines both continuous conduction mode (CCM) and critical conduction mode (CRM). The simulation results declare high efficiency and optimum power factor for wide range of varying loads.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Dual Mode Controller Based Boost Converter Employing Soft Switching Techniques
    AU  - J. Velmurugan
    AU  - R. M. Sekar
    AU  - Jojina anna varghese
    Y1  - 2013/06/10
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ijepe.20130203.11
    DO  - 10.11648/j.ijepe.20130203.11
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 90
    EP  - 96
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20130203.11
    AB  - This paper proposes a dual mode used to control a single phase soft switching boost power factor correction Converter (PFC) developed with a new active snubber circuit. The soft switched boost power factor correction converter has merits of less voltage and current stresses, improved efficiency and reduced switching losses. Thus the cost and complexity of the converter is reduced. The dual mode controller combines both continuous conduction mode (CCM) and critical conduction mode (CRM). The simulation results declare high efficiency and optimum power factor for wide range of varying loads.
    VL  - 2
    IS  - 3
    ER  - 

    Copy | Download

  • Sections