Investigation of Fire Protection Certification for Aircraft Engine Components
International Journal of Energy and Power Engineering
Volume 8, Issue 6, November 2019, Pages: 73-78
Received: Oct. 14, 2019;
Accepted: Nov. 9, 2019;
Published: Nov. 22, 2019
Views 465 Downloads 155
Wu Jingfeng, Airworthiness Certification Center, CAAC, Beijing, China
Song Jianyu, Airworthiness Certification Center, CAAC, Beijing, China
Follow on us
Fire protection performance is one of the most important capabilities for aircraft engine, since the result may be hazardous in the case of a fire condition. According to fire protection regulation CCAR 33.17 of China Civil Aviation Regulations, fire-proof tests of a specific pipeline, a fuel tank and a fuel filter assembly were carried out. Test conditions include inlet fluid temperature, fluid pressure, fluid volume flow, fire temperature and heat flux density. The average flame temperature during the fire tests is 2000 degrees Fahrenheit, the heat flux density is 116kW/m2±10kW/m2 and the distance from burner exhaust to the test area is 100mm in these fire tests. Fire test of pipe passed, but the fire test of oil tank failed because of the failure of the oil circulation system and the melting of plastic pipe material in the ventilation pipe separately. The first fire test of the fuel filter failed because of design defect of one oil drainage path, but after design change of the oil drainage path, the second one succeeded. Based on the fire protection tests and results analysis, three essential factors of fire protection performance and type certification were presented: 1. Volume of medium retained in test parts; 2. Mass flow of medium; 3. Pressure in the test parts cavity.
Aircraft Engine, Fire Protection, Airworthiness
To cite this article
Investigation of Fire Protection Certification for Aircraft Engine Components, International Journal of Energy and Power Engineering.
Vol. 8, No. 6,
2019, pp. 73-78.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Wang yayun. Introduce to engine fire protection system [C]. 6th Chinese Society of Aeronautics and Astronautics, Shenyang. 2014.
Yang yan, Kou yanqing, Yang chengmao. The fire protection of airplane and engine nacelles and experimentations [J]. Aeronautical Science & Technology, 2014, 25 (6): 58-61.
Hu huanghua, Yuan Zheng. Research on Fire Protection System of Civil Aircraft [J]. Civil Aircraft Design and Research. 2010, (2): 7-9.
Shun Shidong, Bai Kangming, Liang Li. Analysis of Airworthiness Requirements for Powerplant Compartment Fire Protection of Transport Category Airplane [J]. Advances in Aeronautical Science and Engineering. 2013, (1): 17-21.
Kuang Lili. Airworthiness requirements of fire prevention and compliance verification test method for transport airplane interior materials [J]. Civil Aircraft Design & Research. 2018, (1): 19-23.
Chen Yuan, Wang Yuzhuo, Li Zhiqiang. Development and application of sonic oil burner used for aircraft materials fire test [J]. Aeronautical Science & Technology, 2019, 30 (04): 50-55.
LIANG Zhichao, WANG Jingke, LEI Youfeng. Analysis of safety design and verification for fire prevention in aeroengine [J]. Aeroengine, 2018, 44 (02): 92-97.
Feng Rui, Tian Runhe, Zhang Hui, Zheng Lili, Yang Rui. Experimental study on the burning behavior and combustion toxicity of corrugated cartons under varying sub-atmospheric pressure. [J]. Journal of hazardous materials, 2019, 379.
Vijay S Swarna, Ibrahim M Alarifi, Waqar A Khan, Ramazan Asmatulu. Enhancing fire and mechanical strengths of epoxy nanocomposites for metal/metal bonding of aircraft aluminum alloys [J]. Polymer Composites, 2019, 40 (9).
CCAR. Fire Protection [C]. Airworthiness Standards: Aircraft Engines. Beijing, 2011.
Federal Aviation Administration. AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES FIRE PROTECTION: PART 33.17 [S]. US: Department of Transportation, 2009.
Federal Aviation Administration. Powerplant installation and propulsion system component fire protection test methods, standards, and ceiteria: AC 20-135 [S]. US: Department of Transportation, 1996.
Federal Aviation Administration. Engine Fire Protection: AC 33-17 [S]. US: Department of Transportation, 2009.