Loss Calculation and Optimization Design of High Frequency Transformer
International Journal of Energy and Power Engineering
Volume 5, Issue 1-1, February 2016, Pages: 53-56
Received: Oct. 21, 2015; Accepted: Oct. 22, 2015; Published: Nov. 30, 2015
Views 4205      Downloads 121
Authors
Lin Li, Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China
Keke Liu, Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China
Xiaoying Zhang, Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China
Ning Zhang, Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China
Article Tools
Follow on us
Abstract
In this paper, the magnetization and loss properties are analyzed and compared of topical magnetic materials. The calculation methods are studied for the losses of the core and windings of the High Frequency Transformer (HFT). Based on the evaluation of the temperature increment, an optimization method is presented for the design of HFT. Finally, the losses of a test model of HFT is calculated and the results are compared with those tested.
Keywords
High Frequency Transformer, Magnetic Materials, Loss, Optimization
To cite this article
Lin Li, Keke Liu, Xiaoying Zhang, Ning Zhang, Loss Calculation and Optimization Design of High Frequency Transformer, International Journal of Energy and Power Engineering. Special Issue: Numerical Analysis, Material Modeling and Validation for Magnetic Losses in Electromagnetic Devices. Vol. 5, No. 1-1, 2016, pp. 53-56. doi: 10.11648/j.ijepe.s.2016050101.18
Copyright
Copyright © 2015 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
References
[1]
Boglietti A,Cavagnino A,Lazzari M,et al. Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach [J]. IEEE Trans. Magn., 39(2): pp.981-989, March 2003.
[2]
Bertotti G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Trans. Magn., 24(1): pp621-630, January, 1988.
[3]
P.L. Dowell. Effect of eddy currents in transformer windings[J]. Proc. Inst. Elect. Eng., 113, pp1387-1394, 1996.
[4]
I. D. Mayergoyz, G. Friedman, and C. Salling, “Comparison of the classical and generalized Preisach hysteresis models with experiments,” IEEE Trans. Magn., vol. 25, no. 5, pp. 3925–3927, Sep. 1989.
[5]
E. Barbisio, F. Fiorillo, and C. Ragusa, “Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops,” IEEE Trans. Magn., vol. 40, no. 4, pp. 1810–1819, Jul. 2004.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186