The development of new materials is a vital to meet the challenges faced by battery technologies. Ionic conducting solid polymer electrolytes could reduce the risk of explosion with non-flammability and high thermal stability. The use of solid polymer electrolyte is the additional strength of the electrodes performances to increase the number of cycle for the rechargeable batteries. In the present study, preparation of PVdF-HFP/PEMA blend based solid polymer electrolytes enclosure of two different plasticizers such as propylene carbonate (PC) and diethyl carbonate (DEC) at different concentrations and the accumulation of lithium perchlorate as salt. To confirm the structural changes and complex formations, the prepared electrolytes were subjected into XRD and FTIR analyses, and the porous nature of the electrolytes was identified using scanning electron microscopy. AC impedance studies were performed at various temperatures from 303 K to 363K for the prepared samples. The results suggest that the PC/DEC (1:1) based electrolyte exhibited the higher ionic conductivity is 0.00477 S/cm at room temperature and 0.00843 S/cm at 363K. The temperature dependence of ionic conductivity also complies with the VTF relation.
| Published in |
International Journal of Energy and Power Engineering (Volume 4, Issue 5-1)
This article belongs to the Special Issue Energy Systems and Developments |
| DOI | 10.11648/j.ijepe.s.2015040501.13 |
| Page(s) | 17-21 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Solid Polymer Electrolyte, FTIR, XRD, SEM, Conductivity
| [1] | Armand, M., Endres, F., MacFarlane, D.R., Ohno, H., Scrosati, B., 2009, “Ionic-liquid materials for the electrochemical challenges of the future” Nature Materials, 8, pp. 621. |
| [2] | Kumar, B., Rodrigues, S. J., Koka, S., 2002, “The crys-talline to amorphous transition in PEO-based composite electrolytes: Role of lithium salts”, Electrochimica Acta, 47, pp. 4125-4131. |
| [3] | Zhanliang Wang, Zhiyuan Tang, 2003, “Characterization of the polymer electrolyte based on the blend of poly(vinylidene fluoride-co-hexaflouropropylene) and poly(vinyl pyrrolidone) for lithium ion battery”, Materials Chemistry and Physics 82, pp. 16–20. |
| [4] | Rajendran, S., Sivakumar, P., Ravi Shanker Babu, 2007, “Studies on the salt concentration of a PVdF–PVC based polymer blend electrolyte”, Journal of Power Sources 164, pp. 815–821. |
| [5] | Alex H.C. Shiao, David Chua, Hsiu-ping Lin, Steven Slane, Mark Salomon, 2000, “Low temperature electrolytes for Li-ion PVDF cells”, Journal of Power Sources 87, pp. 167–173. |
| [6] | Panero, S., Scrosati, B., 2000, “Gelification of liquid–polymer systems: a valid approach for the development of various types of polymer electrolyte membranes”, Journal of Power Sources 90, pp. 13–19. |
| [7] | Rajendran, S., Shanthi Bama, V., 2010, “A study on the effect of various plasticizers in poly(vinyl acetate)-poly(methyl methacrylate) based gel electrolytes” Journal of Non-Crystalline Solids 356, pp. 2764–2768 |
| [8] | Hwang, Yun Ju., Nahm, Kee Suk., Prem Kumar, T., Manuel Stephan, A., 2008, “poly(vinylidene fluoride –hexafluoropropylene) – based membranes for lithium batteries”, Journal of Membrane Science 310, pp. 349–355 |
| [9] | Isabella Nicotera, Luigi Coppola, Cesare Oliviero, Marco Castriota, Enzo Cazzanelli, 2006, “Investigation of ionic conduction and mechanical properties of PMMA–PVdF blend-based polymer electrolytes”, Solid State Ionics 177, pp. 581–588. |
| [10] | Diogo, F., Vieira, César O., Avellaneda, Agnieszka Pawlicka. 2007, “Conductivity study of a gelatin-based polymer electrolyte”, Electrochimica Acta 53(4), pp. 1404-1408. |
| [11] | Sim, L.N., Majid, S.R., Arof, A.K., 2012, “Characteristics of PEMA/PVdF-HFP blend polymeric gel films incorporated with lithium triflate salt in electrochromic device”, Solid State Ionics 209–210, pp. 15-23. |
| [12] | Silverstein, R.M., Bassler, G.C., Morill. T.C., 1991, “Spectroscopic Identification of Organic Compounds”, 5th edition john willy & sons, inc., USA. |
| [13] | Yong-Zhong Bao, Lin-Feng Cong, Zhi-Ming Huang. Zhi-Xue Weng, 2008, “Preparation and proton conductivity of poly(vinylidene fluoride)/layered double hydroxide nanocomposite gel electrolytes “, Journal of Material Science 43, pp. 390–394. |
| [14] | Watanabe, M., Ogata, N., MacCallum, J.R., Vincent, CA. , 1987, Polymer Electrolyte Review, Volume. 1, Elsevier, New York, |
| [15] | Saikia, D., Kumar, A., 2004, “Ionic conduction in P(VDF-HFP)/PVDF–(PC + DEC)–LiClO4 polymer gel electrolytes”, Electrochimica Acta 49,16, pp. 2581-2589. |
APA Style
P. Sivakumar, M. Gunasekaran. (2015). Highly Porous Polymer Electrolytes Based on PVdF-HFP / PEMA with Propylene Carbonate/Diethyl Carbonate for Lithium Battery Applications. International Journal of Energy and Power Engineering, 4(5-1), 17-21. https://doi.org/10.11648/j.ijepe.s.2015040501.13
ACS Style
P. Sivakumar; M. Gunasekaran. Highly Porous Polymer Electrolytes Based on PVdF-HFP / PEMA with Propylene Carbonate/Diethyl Carbonate for Lithium Battery Applications. Int. J. Energy Power Eng. 2015, 4(5-1), 17-21. doi: 10.11648/j.ijepe.s.2015040501.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijepe.s.2015040501.13,
author = {P. Sivakumar and M. Gunasekaran},
title = {Highly Porous Polymer Electrolytes Based on PVdF-HFP / PEMA with Propylene Carbonate/Diethyl Carbonate for Lithium Battery Applications},
journal = {International Journal of Energy and Power Engineering},
volume = {4},
number = {5-1},
pages = {17-21},
doi = {10.11648/j.ijepe.s.2015040501.13},
url = {https://doi.org/10.11648/j.ijepe.s.2015040501.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.s.2015040501.13},
abstract = {The development of new materials is a vital to meet the challenges faced by battery technologies. Ionic conducting solid polymer electrolytes could reduce the risk of explosion with non-flammability and high thermal stability. The use of solid polymer electrolyte is the additional strength of the electrodes performances to increase the number of cycle for the rechargeable batteries. In the present study, preparation of PVdF-HFP/PEMA blend based solid polymer electrolytes enclosure of two different plasticizers such as propylene carbonate (PC) and diethyl carbonate (DEC) at different concentrations and the accumulation of lithium perchlorate as salt. To confirm the structural changes and complex formations, the prepared electrolytes were subjected into XRD and FTIR analyses, and the porous nature of the electrolytes was identified using scanning electron microscopy. AC impedance studies were performed at various temperatures from 303 K to 363K for the prepared samples. The results suggest that the PC/DEC (1:1) based electrolyte exhibited the higher ionic conductivity is 0.00477 S/cm at room temperature and 0.00843 S/cm at 363K. The temperature dependence of ionic conductivity also complies with the VTF relation.},
year = {2015}
}
TY - JOUR T1 - Highly Porous Polymer Electrolytes Based on PVdF-HFP / PEMA with Propylene Carbonate/Diethyl Carbonate for Lithium Battery Applications AU - P. Sivakumar AU - M. Gunasekaran Y1 - 2015/09/02 PY - 2015 N1 - https://doi.org/10.11648/j.ijepe.s.2015040501.13 DO - 10.11648/j.ijepe.s.2015040501.13 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 17 EP - 21 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.s.2015040501.13 AB - The development of new materials is a vital to meet the challenges faced by battery technologies. Ionic conducting solid polymer electrolytes could reduce the risk of explosion with non-flammability and high thermal stability. The use of solid polymer electrolyte is the additional strength of the electrodes performances to increase the number of cycle for the rechargeable batteries. In the present study, preparation of PVdF-HFP/PEMA blend based solid polymer electrolytes enclosure of two different plasticizers such as propylene carbonate (PC) and diethyl carbonate (DEC) at different concentrations and the accumulation of lithium perchlorate as salt. To confirm the structural changes and complex formations, the prepared electrolytes were subjected into XRD and FTIR analyses, and the porous nature of the electrolytes was identified using scanning electron microscopy. AC impedance studies were performed at various temperatures from 303 K to 363K for the prepared samples. The results suggest that the PC/DEC (1:1) based electrolyte exhibited the higher ionic conductivity is 0.00477 S/cm at room temperature and 0.00843 S/cm at 363K. The temperature dependence of ionic conductivity also complies with the VTF relation. VL - 4 IS - 5-1 ER -
Information
Email: