Evaluation of Energy Efficiency, Energy Consumption and Energy Saving in the Production of Oil, Gas and Energy Sectors
International Journal of Energy and Power Engineering
Volume 5, Issue 1, February 2016, Pages: 1-5
Received: Dec. 29, 2015;
Accepted: Jan. 13, 2016;
Published: Jan. 27, 2016
Views 3990 Downloads 136
Eduard A. Mikaelian, Department of Thermodynamics and Heat Engines, Gubkin Russian State University of Oil and Gas, Moscow, Russia
Saif A. Mouhammad, Department of Physics, Taif University, Taif, Saudi Arabia
Follow on us
Energy efficiency, energy consumption and energy savings depend on the performance of energy-technological equipment characterising the operational suitability of it. The operational suitability of the equipment determines the quality of it. Based on energy consumption, fuel consumption and reliability indicators as the formalised quality indicators in energotechnological equipment it is possible to determine the energy efficiency, energy consumption and energy savings of the equipment and therefore select the right production volume indicator (PVI). The aim in determining the fuel and power parameters (FPP) of the oil and gas production units and power sector is to get dependence influencing the energy efficiency (EE), power consumption (PC) and energy saving (ES) of those production units. To solve this problem it was necessary to choose the right (PVI). For that purpose, the issues concerning justifying the choice of the volume indicator for the oil, gas and power sectors using the gas turbine units (GTU) were examined. The correct choice of (PVI) it was possible to determine the available efficient power of gas turbine units which should meet the power consumption requirements for the gas compression by gas pumping units (GPU) on the compressor station (CS) of gas transmission systems for a given mode [4,5].
Energy Efficiency of Equipment, Energy Consumption of Equipment, Energy Saving of Equipment, Production Volume Indicator, Oil and Gas Industry, Gas Pumping Unit, Pipeline Power Consumption, Effective Power of Machines
To cite this article
Eduard A. Mikaelian,
Saif A. Mouhammad,
Evaluation of Energy Efficiency, Energy Consumption and Energy Saving in the Production of Oil, Gas and Energy Sectors, International Journal of Energy and Power Engineering.
Vol. 5, No. 1,
2016, pp. 1-5.
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
V. A. Shurovsky, Yu. N. Sinitsyn and A. k, "Analiz sostoyaniya i perspektiv sokrasheniya zatrat prirodnogo gaza pri ekspluatacii gazoturbinnyh kompressornyh cehov", Moscow, Issue. 2, 1982.
Eduard A. Mikaelyan, "From the energy saving solutions to the resource-saving technology, from the energy audit to the resources audit", Gas industry, № 4, 2014, PP. 70–73.
Normy tehnologicheskogo proektirovanija magistral'nyh gazoprovodov: STO Gazprom 2-3.5-051- 2006.
Eduard A. Mikaelyan, "Harmonisation of the Characteristics of Gas-Turbine and Gas Centrifugal Compressors regarding the Mechanical Power losses in Transmission from the Drive", Quality Management in the Oil and Gas Industry, № 1, 2015, pp. 15-18.
Eduard A. Mikaelyan, "Maintenance of the power technology equipment, the gas-turbine gas pumping units of the gas collection and transport system", Methodology, research, analysis and practice, Moscow, p. 314, 2000.
Eduard A. Mikaelyan, "Environmental air temperature influence on available power of gas-turbine machines", Energy Security- Energy Saving, № 3, 2014, pp. 23-28.
Appraisal procedure of power efficiency of gas-transportation installations and systems: STO Gazprom 2-3.5-113- 2007.
Eduard A. Mikaelyan, "Improvement of quality, provision of reliability and safety of main gas oil pipes in order to improve the operational suitability", Ed. by Professor G. D. Margulov, Moscow, p. 640, 2001.
A. I. Vladimirov, V. Ya. Kershenbaum, "Industrial safety of gas-turbine-driven compressor plants", National Institute of Oil and Gas, Moscow, P. 551, 2008.
Gas pumping units driven with gas turbine. General specifications, GOST R 54404-2011.
Eduard A. Mikaelian, "Recourse-saving technologies of gas transportation", Quality Management in Oil and Gas Industry, № 2, 2012, pp. 12-13.
V. A. Shchurovskii, Yu. N. Sinitsyn, V. I. Korneev, A. V. Cheremin, G. S. Stepanov, "Methodological guidelines for thermotechnical and gasdynamic calculations during tests of turbine pumping units", PR 51-31323949-43-99, Moscow, 1999.