International Journal of Energy and Power Engineering

| Peer-Reviewed |

Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates

Received: 22 May 2015    Accepted: 08 July 2015    Published: 03 November 2015
Views:       Downloads:

Share This Article

Abstract

This paper aims to investigate the evaporative cooling limitations of compressor intake-air for improving the performance of gas turbine power plants. The limitations of the evaporative cooling capability are analyzed and formulated in terms of the characteristic dimensions involving the temperature ratio, the power gain ratio (PGR), thermal efficiency change, and humidity ratio. The effects of different pressure ratios (PRs) are examined for Saudi Arabia summer weather when the turbine inlet temperature is predetermined at1373.15 K. The results of a specific example where the air evaporative cooler drops the temperature to the wet bulb temperature are presented. These indicate that the power gain ratio enhancement depends on the ambient temperature, relative humidity, evaporative cooler effectiveness, and slightly the PR. Especially for PR =10, the PGR is enhanced by 9% at 20% of relative humidity and dropped to 3.37% at 60% of relative humidity. The daily performance of the evaporative cooling method is examined for the hot humid conditions of Jeddah, Saudi Arabia. The results show that the evaporative cooler increased both the daily power output and the thermal efficiency by 2.52% and 0.112%, respectively.

DOI 10.11648/j.ijepe.20150405.18
Published in International Journal of Energy and Power Engineering (Volume 4, Issue 5, October 2015)
Page(s) 287-297
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Gas Turbine, Air-Cooling, Power Enhancement, Evaporative Cooler

References
[1] Zadpoor_AA, Golshan AH. Performance improvement of a gas turbine cycle by using adesiccant-based evaporative cooling system. Energy 2006; 31:2652-2664.
[2] Chaker M, Homji CBM, Mee III TR. Inlet fogging of gas turbine engines. Proceedings of ASME Turbo Expo; 2001 June 4-7; New Orleans, USA; 2001.
[3] AL-Hamdan OR, Saker AA.Studying the role played by evaporative cooler on the performance of GE gas turbine existed in Shuaiba North Electric Generator Power Plant. Energy Power Eng 2013; 5:391-400.
[4] Johnson RS. The theory and operation of evaporative coolers for industrial gas turbine installations. J Eng Gas Turbines Power 1989; 111:327-334.
[5] Alhazmy MM, Najjar YSH. Augmentation of gas turbine performance using air coolers. App Therm Eng 2004; 24:415-429.
[6] Meher H, Cyrus B, Mee RT, Thomas R. Inlet fogging of gas turbine engines, part B: droplet sizing analysis nozzle types, measurement and testing. Proc ASME Turbo Exo 2002; 2002 June 3-6; Amsterdam, The Netherlands.
[7] Bettocchi R, Spina PR, Moberti F. Gas turbine inlet air cooling using non-adiabatic saturation process. ASME Cogen-Turbo Power Conf; 1995 August 23-25; Vienna, Austria .ASME; 1995.p.1-10.
[8] Cyrus B, Mee RT. Gas turbine power augmentation by fogging of inlet air. Proc 28th Turbomach Symp. 1999.p.95-114.
[9] Korakianities T, Wilson DG. Models for predicting the performance of Brayton-cycle engines.Eng Gas Turbine Power 1994; 116:381-388.
[10] Klein KA, Alvarado FL. EES-Engineering Equation Solver, F-Chart Software.Middleton, WI.
[11] Dossat RJ. Principles of refrigeration, New York: John Wiley and Sons; 1997.
[12] Cortes CPE, Willems D. Gas turbine inlet cooling techniques: an overview of current technology. Proc Power GEN 2003; 2003 Dec. 9-11;Nevada, USA.
[13] McQuiston FC, Parker JD, SpilterJD. Heating, ventilating and air conditioning: design and analysis, 5th ed. New York: Willey; 2000.
[14] Li KW, Priddy A P. Power plant system design. New York: John Wiley & Sons; 1985.
Author Information
  • Mechanical Engineering, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia

  • Mechanical Engineering, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia

  • Saudi Electric Services Polytechnic (SESP), Baish, Jazan Province, Kingdom of Saudi Arabia

Cite This Article
  • APA Style

    Majed Alhazmy, Badr Habeebullah, Rahim Jassim. (2015). Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates. International Journal of Energy and Power Engineering, 4(5), 287-297. https://doi.org/10.11648/j.ijepe.20150405.18

    Copy | Download

    ACS Style

    Majed Alhazmy; Badr Habeebullah; Rahim Jassim. Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates. Int. J. Energy Power Eng. 2015, 4(5), 287-297. doi: 10.11648/j.ijepe.20150405.18

    Copy | Download

    AMA Style

    Majed Alhazmy, Badr Habeebullah, Rahim Jassim. Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates. Int J Energy Power Eng. 2015;4(5):287-297. doi: 10.11648/j.ijepe.20150405.18

    Copy | Download

  • @article{10.11648/j.ijepe.20150405.18,
      author = {Majed Alhazmy and Badr Habeebullah and Rahim Jassim},
      title = {Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates},
      journal = {International Journal of Energy and Power Engineering},
      volume = {4},
      number = {5},
      pages = {287-297},
      doi = {10.11648/j.ijepe.20150405.18},
      url = {https://doi.org/10.11648/j.ijepe.20150405.18},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20150405.18},
      abstract = {This paper aims to investigate the evaporative cooling limitations of compressor intake-air for improving the performance of gas turbine power plants. The limitations of the evaporative cooling capability are analyzed and formulated in terms of the characteristic dimensions involving the temperature ratio, the power gain ratio (PGR), thermal efficiency change, and humidity ratio. The effects of different pressure ratios (PRs) are examined for Saudi Arabia summer weather when the turbine inlet temperature is predetermined at1373.15 K. The results of a specific example where the air evaporative cooler drops the temperature to the wet bulb temperature are presented. These indicate that the power gain ratio enhancement depends on the ambient temperature, relative humidity, evaporative cooler effectiveness, and slightly the PR. Especially for PR =10, the PGR is enhanced by 9% at 20% of relative humidity and dropped to 3.37% at 60% of relative humidity. The daily performance of the evaporative cooling method is examined for the hot humid conditions of Jeddah, Saudi Arabia. The results show that the evaporative cooler increased both the daily power output and the thermal efficiency by 2.52% and 0.112%, respectively.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Limitations of Inlet Air Evaporative Cooling System for Enhancing Gas Turbine Performance in Hot and Humid Climates
    AU  - Majed Alhazmy
    AU  - Badr Habeebullah
    AU  - Rahim Jassim
    Y1  - 2015/11/03
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijepe.20150405.18
    DO  - 10.11648/j.ijepe.20150405.18
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 287
    EP  - 297
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20150405.18
    AB  - This paper aims to investigate the evaporative cooling limitations of compressor intake-air for improving the performance of gas turbine power plants. The limitations of the evaporative cooling capability are analyzed and formulated in terms of the characteristic dimensions involving the temperature ratio, the power gain ratio (PGR), thermal efficiency change, and humidity ratio. The effects of different pressure ratios (PRs) are examined for Saudi Arabia summer weather when the turbine inlet temperature is predetermined at1373.15 K. The results of a specific example where the air evaporative cooler drops the temperature to the wet bulb temperature are presented. These indicate that the power gain ratio enhancement depends on the ambient temperature, relative humidity, evaporative cooler effectiveness, and slightly the PR. Especially for PR =10, the PGR is enhanced by 9% at 20% of relative humidity and dropped to 3.37% at 60% of relative humidity. The daily performance of the evaporative cooling method is examined for the hot humid conditions of Jeddah, Saudi Arabia. The results show that the evaporative cooler increased both the daily power output and the thermal efficiency by 2.52% and 0.112%, respectively.
    VL  - 4
    IS  - 5
    ER  - 

    Copy | Download

  • Sections