Small scale screw extrusion machine is designed and tested for making compact sawdust briquettes in rural area in Indonesia. The extrusion machine is powered by 5,5 HP gasoline internal combustion engine. In this work, briquetting machine is used to produce sawdust briquettes which two different ratios of starch-sawdust. The ratios of starch to sawdust are 1:4 and 2:4. Sawdust briquettes have a length of 3 cm and 4 cm for both composition ratios. The performance of the machine is investigated in term of density changes of briquettes after three days. The density of sawdust briquettes just after extrusion process is compared with the density of sawdust briquettes after 3 days sunlight drying. The result shows that the extrusion machine is able to produce compact sawdust briquettes with different ratios of starch to sawdust. The result also indicates that 3 cm long sawdust briquettes which starch to sawdust ratio 2 : 4 has the lowest density changes and has the highest compressive strength.
| Published in | International Journal of Energy and Power Engineering (Volume 3, Issue 5) |
| DOI | 10.11648/j.ijepe.20140305.15 |
| Page(s) | 250-253 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Briquettes, Sawdust, Extrusion, Density
| [1] | ESDM, “Indonesia Energi Outlook 2010”, Pusdatin Kementrian Energi dan Sumber Daya Mineral, 2010 |
| [2] | C.K.W. Ndiema, P.N. Manga, C.R. Ruttoh, ”Influnce of Die Pressure on Relaxation Characteristics of Briquetted Biomass”, Energy Conversion and Management, 43 (2002) 2157-2161 |
| [3] | Daud Patabang, ”Karakteristik Termal Briket Arang Sekam Padi dengan Variasi Bahan Perekat”, Jurnal Mekanikal, Vol 3, No 2, 2012 |
| [4] | S.Yaman, M. Sahan M., H. Haykiri-Acma, K. Sesen, S. Kucukbayrak, ”Fuel Briquettes from Biomass-Lignite Blends, Fuel Processing Technology, 72 (2001) 1-8 |
| [5] | R.N. Singh, P.R. Bhoi, S.R. Patel, “Modification of Commercial Briquetting Machine to Produce 35 mm Diameter Briquettes Suitable for Combustion and Combustion”, Renewable Energy 32 (2007) 474-479 |
| [6] | ESDM, ”Blueprint Pengelolaan Energi Nasional 2005-2025, Kementrian Energi dan Sumber Daya Mineral, 2006 |
APA Style
Anak Agung Putu Susastriawan, Bambang Wahyu Sidharta. (2014). Development of Small Scale Screw Extrusion Machine for Production of Sawdust Briquettes in Rural Area in Indonesia. International Journal of Energy and Power Engineering, 3(5), 250-253. https://doi.org/10.11648/j.ijepe.20140305.15
ACS Style
Anak Agung Putu Susastriawan; Bambang Wahyu Sidharta. Development of Small Scale Screw Extrusion Machine for Production of Sawdust Briquettes in Rural Area in Indonesia. Int. J. Energy Power Eng. 2014, 3(5), 250-253. doi: 10.11648/j.ijepe.20140305.15
AMA Style
Anak Agung Putu Susastriawan, Bambang Wahyu Sidharta. Development of Small Scale Screw Extrusion Machine for Production of Sawdust Briquettes in Rural Area in Indonesia. Int J Energy Power Eng. 2014;3(5):250-253. doi: 10.11648/j.ijepe.20140305.15
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijepe.20140305.15,
author = {Anak Agung Putu Susastriawan and Bambang Wahyu Sidharta},
title = {Development of Small Scale Screw Extrusion Machine for Production of Sawdust Briquettes in Rural Area in Indonesia},
journal = {International Journal of Energy and Power Engineering},
volume = {3},
number = {5},
pages = {250-253},
doi = {10.11648/j.ijepe.20140305.15},
url = {https://doi.org/10.11648/j.ijepe.20140305.15},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20140305.15},
abstract = {Small scale screw extrusion machine is designed and tested for making compact sawdust briquettes in rural area in Indonesia. The extrusion machine is powered by 5,5 HP gasoline internal combustion engine. In this work, briquetting machine is used to produce sawdust briquettes which two different ratios of starch-sawdust. The ratios of starch to sawdust are 1:4 and 2:4. Sawdust briquettes have a length of 3 cm and 4 cm for both composition ratios. The performance of the machine is investigated in term of density changes of briquettes after three days. The density of sawdust briquettes just after extrusion process is compared with the density of sawdust briquettes after 3 days sunlight drying. The result shows that the extrusion machine is able to produce compact sawdust briquettes with different ratios of starch to sawdust. The result also indicates that 3 cm long sawdust briquettes which starch to sawdust ratio 2 : 4 has the lowest density changes and has the highest compressive strength.},
year = {2014}
}
TY - JOUR T1 - Development of Small Scale Screw Extrusion Machine for Production of Sawdust Briquettes in Rural Area in Indonesia AU - Anak Agung Putu Susastriawan AU - Bambang Wahyu Sidharta Y1 - 2014/10/30 PY - 2014 N1 - https://doi.org/10.11648/j.ijepe.20140305.15 DO - 10.11648/j.ijepe.20140305.15 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 250 EP - 253 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.20140305.15 AB - Small scale screw extrusion machine is designed and tested for making compact sawdust briquettes in rural area in Indonesia. The extrusion machine is powered by 5,5 HP gasoline internal combustion engine. In this work, briquetting machine is used to produce sawdust briquettes which two different ratios of starch-sawdust. The ratios of starch to sawdust are 1:4 and 2:4. Sawdust briquettes have a length of 3 cm and 4 cm for both composition ratios. The performance of the machine is investigated in term of density changes of briquettes after three days. The density of sawdust briquettes just after extrusion process is compared with the density of sawdust briquettes after 3 days sunlight drying. The result shows that the extrusion machine is able to produce compact sawdust briquettes with different ratios of starch to sawdust. The result also indicates that 3 cm long sawdust briquettes which starch to sawdust ratio 2 : 4 has the lowest density changes and has the highest compressive strength. VL - 3 IS - 5 ER -
Information
Email: