International Journal of Energy and Power Engineering

| Peer-Reviewed |

Predicting Heat Demand for a District Heating Systems

Received: 31 August 2014    Accepted: 05 October 2014    Published: 20 October 2014
Views:       Downloads:

Share This Article

Abstract

Poland is one of the heaviest users of district heating systems in Europe, and those district heating systems are heated mainly by coal. Sustainable development of district heating systems in Poland including improving quality of environment, economic of heat production and security of heat supply is in close connection with increasing of energy efficiency. Heat production and heat distribution plays important role in national energy balance. Additional increasing of energy efficiency in district heating systems need detail forecasts for future heat consumption in scale of individual district heating system and for systems in whole country. Accurate forecast give possibility for increasing efficiency of heat production, decreasing fuel consumption and connected with it emission decreasing from combustion products to the atmosphere. Heat production efficiency can be optimized through the use of appropriate procedures for running heat sources alongside short-term heat demand forecasting combined with preparation for adjusting heat source work parameters to the predicted heat load for a few hours hence. The artificial neural networks model delivers good forecasting results. The accuracy of the results depends on the kind of network, its architecture, the size and type of input data as well as the forecasting period. Forecasting accuracy within a 3-5% margin of error is sufficient to steer heat source operations. Described forecasting methods can be use as a good tool to regulate district heating networks and heat sources.

DOI 10.11648/j.ijepe.20140305.13
Published in International Journal of Energy and Power Engineering (Volume 3, Issue 5, October 2014)
Page(s) 237-244
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

District Heating Systems, Heat Demand Prediction

References
[1] Report of the President of the Energy Regulatory Office – Heat in Numbers http://www.ure.gov.pl/portal/pl/pdb/509/Energetyka_cieplna_w_liczbach.html (in Polish).
[2] Ostergaard P.A., Lund H., A renewable energy system in Frederikshavn using low-temperature geothermal energy for district heating. Applied Energy 88 (2011) 479-487.
[3] Danestig M., Gebremehdin A., Karlsson B., Stockholm CHP potential-An opportunity for CO2 reductions? Energy Policy 35 (2007) 4650-4660.
[4] Directive 2010/75EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution and control) (Recast).
[5] Directive 2009/29EC of the European Parliament and of the Council of 23 April 2009 amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the Community.
[6] Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002 on the energy performance of buildings.
[7] Directive 2004/8/EC of the European Parliament and of the Council of 11 February 2004 on the promotion of cogeneration based on a useful heat demand in the internal energy market and amending Directive 92/42/EEC.
[8] Directive 2006/32EC of the European Parliament and of the Council of 5 April 2006 on energy end-use efficiency and energy services and repealing Council Directive 93/76/EEC.
[9] Energy Policy for Poland 2030 from 10 of November 2009 (Ministry of Economy – in Polish).
[10] Stevanovic V.D. et al, Prediction of thermal transients in district heating systems, Energy Conversion and Management 50 (2009) 2167-2173.
[11] Larsen H.V. et al, A comparison of aggregated models for simulation and operational optimization of district heating networks, Energy Conversion and Management 45 (2004) 1119-1139.
[12] Lund H., Andersen A.N., Optimal designs of small CHP plants in a market with fluctuating electricity prices, Energy Conversion and Management 46 (2005) 893-904.
[13] Andersen A.N., Lund H., New CHP partnerships offering balancing of fluctuating renewable electricity productions, Journal of Cleaner Production 15 (2007) 288-293.
[14] Streckiene G. et al, Feasibility of CHP-plants with thermal stores in the German spot market, Applied Energy 86 (2009) 2308-2316.
[15] Energy market http://www.poee.gpw.pl
[16] Ekonomu L., Greek long-term energy consumption prediction using artificial neural networks, Energy 2010; v.35 512-517.
[17] Kreider J.H. et al Operational data as the Basis for Neural Network Prediction of Hourly Electrical Demand. ASHRAE Transactions (102). 1996.
[18] Klajic K. at al, Use of neural networks for modeling and predicting boilers operating performance, Energy 2012; v.45 304-311.
[19] Cay J. at al, Prediction of engine performance and exhaust emissions for gasoline and methanol using artificial neural network, Energy 2013 v.xxx 1-10.
[20] Rohrig K. et al, “New concepts to integrate German offshore wind potential into electrical energy supply” Publication of Institut für Solare Energieversorgungstechnik (ISET). Kassel University 2005.
[21] Kawashima M. at al, “Hourly thermal load prediction for next 24 hours by ARIMA, EWMA, LR and an artificial neural network. ASHRAE Transaction 101 (1), 1995
[22] Neto A.H., Fiorelli F.A, Comparison between detailed model simulation and artificial neural network for forecasting building energy consumption, Energy and Buildings 40 (2008) 2169-2176.
[23] Li K., Su H., Forecasting building energy consumption with hybrid genetic algorithm-hierarchical adaptive network-based fuzzy inference system, Energy and Buildings 42 (2010). 2070-2076.
[24] Kreider F.J,. Wang X.A, “Artificial neural network demonstration for automated generation of energy use predictors for commercial building”. ASHRAE Transaction 97 (1), 1991
[25] Kreider F.J., Haberl J.S., “Predicting hourly building energy use: The great energy predication shoot out – overview and discussion of results”. ASHRAE Transaction 100 (2), 1994
[26] Feuston B.P., Thurtell J.H. “Generalized Nonlinear regression with Ensemble of Neural Nets: The great energy predictor shootout”. ASHRAE Transactions (100). 1994.
[27] Stevenson W.J. “Using Artificial Neural Nets to Predict Building Energy Parameters”. ASHRAE Transactions (100). 1994.
[28] American Society of Heating, Refrigeration and Air-Conditioning engineers, Inc. “The Use of Artificial Intelligence in Building Systems”. A Collection of Papers from ASHRAE Transactions and ASHRAE Journal. Atlanta 1995r.
[29] Haberl J.S., Thamilseran S. “The great energy predication shoot out II. Measuring retrofit savings - overview and discussion of results”. ASHRAE Transaction 102 (2), 1996
[30] Fast M., Palme T. “Application of artificial neural networks to the condition monitoring and diagnosis of a combined heat and power plant”. Energy 35 (2010) 1114-1120.
[31] Ahmed O. et al, “Feedforward-Feedback Controller Using General Regression Neural Network (GRNN) for Laboratory HVAC System”. ASHRAE Transactions. 1998.
[32] Curtis P.S. et al, “Adaptive control of HVAC Processes using Predictive neural networks”. ASHRAE Transactions (99). 1993.
[33] Kalogirou S., Bojic M. “Artificial neural networks for the prediction of the energy consumption of a passive solar building”. Pergamon. Energy no 25 /2000.
[34] Privara S. at al, “Model predictive control of a building heating system: the first experience”. Energy and Buildings 43 (2011) 564-572.
[35] Chmielnicki W. “Application of neural networks for control of district heating”. Archives of Civil Engineering. PWN. Volume 56, issue 3. Warsaw 2010.
[36] Osowski S. “Neural networks – algorithmic approach” WNT, Warsaw 1996. (in Polish).
[37] Osowski S. “Neural networks”. Publishing House of the Warsaw University of Technology. Warsaw 1994. (in Polish).
Author Information
  • Faculty of Environmental Engineering, Warsaw University of Technology, Warsaw, Poland

Cite This Article
  • APA Style

    Krzysztof Wojdyga. (2014). Predicting Heat Demand for a District Heating Systems. International Journal of Energy and Power Engineering, 3(5), 237-244. https://doi.org/10.11648/j.ijepe.20140305.13

    Copy | Download

    ACS Style

    Krzysztof Wojdyga. Predicting Heat Demand for a District Heating Systems. Int. J. Energy Power Eng. 2014, 3(5), 237-244. doi: 10.11648/j.ijepe.20140305.13

    Copy | Download

    AMA Style

    Krzysztof Wojdyga. Predicting Heat Demand for a District Heating Systems. Int J Energy Power Eng. 2014;3(5):237-244. doi: 10.11648/j.ijepe.20140305.13

    Copy | Download

  • @article{10.11648/j.ijepe.20140305.13,
      author = {Krzysztof Wojdyga},
      title = {Predicting Heat Demand for a District Heating Systems},
      journal = {International Journal of Energy and Power Engineering},
      volume = {3},
      number = {5},
      pages = {237-244},
      doi = {10.11648/j.ijepe.20140305.13},
      url = {https://doi.org/10.11648/j.ijepe.20140305.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20140305.13},
      abstract = {Poland is one of the heaviest users of district heating systems in Europe, and those district heating systems are heated mainly by coal. Sustainable development of district heating systems in Poland including improving quality of environment, economic of heat production and security of heat supply is in close connection with increasing of energy efficiency. Heat production and heat distribution plays important role in national energy balance. Additional increasing of energy efficiency in district heating systems need detail forecasts for future heat consumption in  scale of individual district heating system  and for systems in whole country. Accurate forecast give possibility for increasing  efficiency of heat production, decreasing fuel consumption and connected with it emission decreasing from combustion products to the atmosphere. Heat production efficiency can be optimized through the use of appropriate procedures for running heat sources alongside short-term heat demand forecasting combined with preparation for adjusting heat source work parameters to the predicted heat load for a few hours hence. The artificial neural networks model delivers good forecasting results. The accuracy of the results depends on the kind of network, its architecture, the size and type of input data as well as the forecasting period. Forecasting accuracy within a 3-5% margin of error is sufficient to steer heat source operations. Described forecasting methods can be use as a good tool to regulate district heating networks and heat sources.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Predicting Heat Demand for a District Heating Systems
    AU  - Krzysztof Wojdyga
    Y1  - 2014/10/20
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijepe.20140305.13
    DO  - 10.11648/j.ijepe.20140305.13
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 237
    EP  - 244
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20140305.13
    AB  - Poland is one of the heaviest users of district heating systems in Europe, and those district heating systems are heated mainly by coal. Sustainable development of district heating systems in Poland including improving quality of environment, economic of heat production and security of heat supply is in close connection with increasing of energy efficiency. Heat production and heat distribution plays important role in national energy balance. Additional increasing of energy efficiency in district heating systems need detail forecasts for future heat consumption in  scale of individual district heating system  and for systems in whole country. Accurate forecast give possibility for increasing  efficiency of heat production, decreasing fuel consumption and connected with it emission decreasing from combustion products to the atmosphere. Heat production efficiency can be optimized through the use of appropriate procedures for running heat sources alongside short-term heat demand forecasting combined with preparation for adjusting heat source work parameters to the predicted heat load for a few hours hence. The artificial neural networks model delivers good forecasting results. The accuracy of the results depends on the kind of network, its architecture, the size and type of input data as well as the forecasting period. Forecasting accuracy within a 3-5% margin of error is sufficient to steer heat source operations. Described forecasting methods can be use as a good tool to regulate district heating networks and heat sources.
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

  • Sections