A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors

Nobuhiro Shimoi; Carlos Cuadr

doi:doi:10.11648/j.ajrs.20150303.12

| Peer-Reviewed

A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors

Nobuhiro Shimoi, Carlos Cuadr

Published in American Journal of Remote Sensing (Volume 3, Issue 3)

Received: 4 June 2015 Accepted: 16 June 2015 Published: 4 July 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.

Published in	American Journal of Remote Sensing (Volume 3, Issue 3)
DOI	10.11648/j.ajrs.20150303.12
Page(s)	43-48
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Smart Sensor, Health Monitoring, Piezoelectric Sensor

References

[1]	N. Shimoi, C. H. Cuadra, H. Madokoro and M. Saijo, Vibration Analysis of Wooden Traditional Frames Using Finite Element Method and Measurements with a Simple Piezoelectric Cable Displacement Sensor, Transactions of Japan Society of Mechanical Engineering, Ser. C, Vol. 79, No. 806, pp. 3442-3452, 2013
[2]	N. Shimoi, M. Saijo,C. H. Cuadra, and H. Madokoro, A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors, International Journal of Instrumentation Science.Vol.4,No1.pp1-9 ,2015
[3]	T. Maruyama, The outline of the active fault of the epicentral area of 2008 China Sichuan big earthquake, AFRC NEWS, No. 79, pp. 1-3, 2008
[4]	S. Watanabe and M. Samizo, The health monitoring system of bridge pier foundation by measuring slight oscillating movement on a steady basis, Railway Technical Research Institute Report, Vol. 25, No. 7, pp. 25-30, 2011
[5]	Structure committee of civil engineering : Subcommittee for design technique of FRP bridge, Report of subcommittee for design technique of FRP bridge, University of Tokyo Press, 2004
[6]	K. Ono, A research on life- prolonging technology of established structures, The second new urban socio-technical seminar, Research report 3, Study group to create new urban by fused socio-technology, pp. 11-23, 2004
[7]	Building Research Institute, An independent administrative agency, National Institute for Land and Infrastructure Management, Ministry of Land, Infrastructure, Transport and Tourism, About the investigation report on building damage and revival situation after 2008 China Sichuan big earthquake, 2008http://www.nilim.go.jp/lab/bcg/kisya/kako/journal/20081112.pdf
[8]	Tokyo Sensor, Piezoelectric cable, Piezo Film Technical Manual, Vol. R1, pp.17-18, 2001
[9]	Liu Ke and S. Shioya, Research on strength testing method of wall of existing brick structures, Collected papers of annual convention of Japan Concrete Institute, Vol. 25, No. 2, pp.1927-1932, 2003
[10]	Design of machine elements, Akira Yoshida, Writing and editing, Japanese science and engineering publishing company,pp11-13(2012)

Cite This Article

Plain Text BibTeX RIS

APA Style

Nobuhiro Shimoi, Carlos Cuadr. (2015). A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. American Journal of Remote Sensing, 3(3), 43-48. https://doi.org/10.11648/j.ajrs.20150303.12

Copy | Download

ACS Style

Nobuhiro Shimoi; Carlos Cuadr. A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. Am. J. Remote Sens. 2015, 3(3), 43-48. doi: 10.11648/j.ajrs.20150303.12

Copy | Download

AMA Style

Nobuhiro Shimoi, Carlos Cuadr. A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. Am J Remote Sens. 2015;3(3):43-48. doi: 10.11648/j.ajrs.20150303.12

Copy | Download

@article{10.11648/j.ajrs.20150303.12,
  author = {Nobuhiro Shimoi and Carlos Cuadr},
  title = {A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors},
  journal = {American Journal of Remote Sensing},
  volume = {3},
  number = {3},
  pages = {43-48},
  doi = {10.11648/j.ajrs.20150303.12},
  url = {https://doi.org/10.11648/j.ajrs.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajrs.20150303.12},
  abstract = {Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors
AU  - Nobuhiro Shimoi
AU  - Carlos Cuadr
Y1  - 2015/07/04
PY  - 2015
N1  - https://doi.org/10.11648/j.ajrs.20150303.12
DO  - 10.11648/j.ajrs.20150303.12
T2  - American Journal of Remote Sensing
JF  - American Journal of Remote Sensing
JO  - American Journal of Remote Sensing
SP  - 43
EP  - 48
PB  - Science Publishing Group
SN  - 2328-580X
UR  - https://doi.org/10.11648/j.ajrs.20150303.12
AB  - Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

Nobuhiro Shimoi

Department of Machine Intelligence and Systems Engineering, Akita Prefectural University, Yurihonjo, Japan
Carlos Cuadr

Department of Architecture and Environment Systems, Akita Prefectural University, Yurihonjo, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Nobuhiro Shimoi, Carlos Cuadr. (2015). A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. American Journal of Remote Sensing, 3(3), 43-48. https://doi.org/10.11648/j.ajrs.20150303.12

Copy | Download

ACS Style

Nobuhiro Shimoi; Carlos Cuadr. A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. Am. J. Remote Sens. 2015, 3(3), 43-48. doi: 10.11648/j.ajrs.20150303.12

Copy | Download

AMA Style

Nobuhiro Shimoi, Carlos Cuadr. A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors. Am J Remote Sens. 2015;3(3):43-48. doi: 10.11648/j.ajrs.20150303.12

Copy | Download

@article{10.11648/j.ajrs.20150303.12,
  author = {Nobuhiro Shimoi and Carlos Cuadr},
  title = {A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors},
  journal = {American Journal of Remote Sensing},
  volume = {3},
  number = {3},
  pages = {43-48},
  doi = {10.11648/j.ajrs.20150303.12},
  url = {https://doi.org/10.11648/j.ajrs.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajrs.20150303.12},
  abstract = {Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors
AU  - Nobuhiro Shimoi
AU  - Carlos Cuadr
Y1  - 2015/07/04
PY  - 2015
N1  - https://doi.org/10.11648/j.ajrs.20150303.12
DO  - 10.11648/j.ajrs.20150303.12
T2  - American Journal of Remote Sensing
JF  - American Journal of Remote Sensing
JO  - American Journal of Remote Sensing
SP  - 43
EP  - 48
PB  - Science Publishing Group
SN  - 2328-580X
UR  - https://doi.org/10.11648/j.ajrs.20150303.12
AB  - Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.
VL  - 3
IS  - 3
ER  -

Copy | Download