| Peer-Reviewed

Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model

Received: 3 January 2017    Accepted: 10 January 2017    Published: 12 June 2017
Views:       Downloads:
Abstract

In this paper, a method for the determination of the optimal tilt angle for yearly fixed flat-plate photovoltaic (PV) module at any given location is presented. The method is based on yearly global radiation incident on a horizontal plane as downloaded from NASA website. Futrthermore, PVSyst software that uses transposition model is used to generate the yearly global radiation incident on a tilted plane for various tilt angles, from 0° to 46°. The study is conducted for a health facility in Uyo, Akwa Ibom state, Nigeria with longitude of 7.860761, latitude of 5.011474 and elevation of 67.506 m. The optimal tilt angle is obtained from the quadratic trendline equation fitted to the graph of the transposition factor versus tilt angle. The result is that the optimal tilt angle for the yearly fixed flat-plate PV module at the selected Flocation is 9.71° which gives average yearly transposition factor 1.0105. Essential, the results indicate that about additional 1.05% of solar radiation will be captured per year by tilting the PV module at optimal tilt angle of 9.71°. At any other tilt angle less solar radiation will be captured per year.

Published in American Journal of Software Engineering and Applications (Volume 6, Issue 3)
DOI 10.11648/j.ajsea.20170603.14
Page(s) 80-84
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Optimal Tilt Angle, Global Solar Radiation, PVSyst Software, Transposition Factor, Yearly Fixed Tile Angle, Solar Power System

References
[1] Miller, W., Dejong, J., Ocegueda, V., Ruiz, V. L., Paretich, C., & Wlodarczyk, A. (2015). U.S. Patent No. 9,074,797. Washington, DC: U.S. Patent and Trademark Office.
[2] David, M., Lauret, P., & Boland, J. (2013). Evaluating tilted plane models for solar radiation using comprehensive testing procedures, at a southern hemisphere location. Renewable Energy, 51, 124-131.
[3] Norwood, Z., Nyholm, E., Otanicar, T., & Johnsson, F. (2014). A Geospatial Comparison of Distributed Solar Heat and Power in Europe and the US. PloS one, 9 (12), e112442.
[4] Das, P. K., Habib, M. A., & Mynuddin, M. (2015). Microcontroller Based Automatic Solar Tracking System with Mirror Booster. International Journal of Sustainable and Green Energy, 4 (4), 125-136.
[5] Lave, M., Hayes, W., Pohl, A., & Hansen, C. W. (2015). Evaluation of global horizontal irradiance to plane-of-array irradiance models at locations across the united states. IEEE Journal of Photovoltaics, 5(2), 597-606.
[6] Badescu, V. (2014). Modeling solar radiation at the earth's surface. Springer.
[7] Basunia, M. A., Yoshiob, H., & Abec, T. (2012). Simulation of solar radiation incident on horizontal and inclined surfaces. J Eng Res, 9 (2), 27-35.
[8] Khalil, S. A., & Shaffie, A. M. (2016). Evaluation of transposition m odels of solar irradiance over Egypt. Renewable and Sustainable Energy Reviews, 66, 105-119.
[9] Tuomiranta, A., & Ghedira, H. (2015, June). Evaluation of decomposition and transposition models for irradiance data conversion under a hot desert climate. In Proc. 3rd Int. Conf. Energy & Meteorology (ICEM), Boulder, USA.
[10] Lave, M., Hayes, W., Pohl, A., & Hansen, C. W. (2015). Evaluation of global horizontal irradiance to plane-of-array irradiance models at locations across the United States. IEEE Journal of Photovoltaics, 5 (2), 597-606.
[11] Kuo, C. W., Chang, W. C., & Chang, K. C. (2014). Modeling the hourly solar diffuse fraction in Taiwan. Renewable Energy, 66, 56-61.
[12] Engerer, N. A. (2015). Minute resolution estimates of the diffuse fraction of global irradiance for southeastern Australia. Solar Energy, 116, 215-237.
[13] Jakhrani, A. Q., Othman, A. K., Rigit, A. R., Samo, S. R., & Kamboh, S. A. (2012). Estimation of incident solar radiation on tilted surface by different empirical models. International Journal of Scientific and Research Publications, 2 (12), 1-6.
[14] Jakhrani, A. Q., Othman, A. K., Rigit, A. R. H., Samo, S. R., Ling, L. P., & Baini, R. (2010). Evaluation of Incident Solar Radiation on Inclined Plane by Empirical Models at Kuching, Sarawak, Malaysia. IEEE ICSET.
[15] Noorian, A. M., Moradi, I., & Kamali, G. A. (2008). Evaluation of 12 models to estimate hourly diffuse irradiation on inclined surfaces. Renewable energy, 33 (6), 1406-1412.
[16] Kamali, G. A., Moradi, I., & Khalili, A. (2006). Estimating solar radiation on tilted surfaces with various orientations: a study case in Karaj (Iran). Theoretical and applied climatology, 84 (4), 235-241.
[17] Tina, G. M., Ventura, C., & De Fiore, S. (2012, June). Sub-hourly irradiance models on the plane of array for photovoltaic energy forecasting applications. In Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE (pp. 001321-001326). IEEE.
[18] Stanciu, C., & Stanciu, D. (2014). Optimum tilt angle for flat plate collectors all over the World–A declination dependence formula and comparisons of three solar radiation models. Energy Conversion and Management, 81, 133-143.
[19] Mitra, I., Davis, M., & Pasicko, R. (2011). MS32, MS34.
[20] Burgess, P. A., Vahdati, M. M., Davies, D. D., & Philip, S. K. Development of A Virtual Pyranometer For Solar Energy Monitoring. TSBE EngD Conference, TSBE Centre, University of Reading, Whiteknights, RG6 6AF, 5th July 2011. Available at: http://www.reading.ac.uk/web/files/tsbe/burgess_tsbe_conf_2011.pdf. Accessed on December 24th 2016.
[21] Loutzenhiser, P. G., Manz, H., Felsmann, C., Strachan, P. A., Frank, T., & Maxwell, G. M. (2007). Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation. Solar Energy, 81 (2), 254-267.
[22] Frydrychowicz-Jastrzębska, G., & Bugała, A. (2015). Modeling the Distribution of Solar Radiation on a Two-Axis Tracking Plane for Photovoltaic Conversion. Energies, 8 (2), 1025-1041.
[23] Włodarczyk, D., & Nowak, H. (2009). Statistical analysis of solar radiation models onto inclined planes for climatic conditions of Lower Silesia in Poland. Archives of Civil and Mechanical Engineering, 9 (2), 127-144.
[24] Jakhrani, A. Q., Samo, S. R., Rigit, A. R. H., & Kamboh, S. A. (2013). Selection of models for calculation of incident solar radiation on tilted surfaces. World Applied Sciences Journal, 22 (9), 1334-1343.
[25] Sultan, S., Wu, R., Ahmad, I., & Ahmad, M. F. (2014). Modeling of Diffuse Solar Radiation and Impact of Complex Terrain over Pakistan Using RS/GIS. Journal of Geographic Information System, 6 (04), 404.
[26] Perez, R., Seals, R., Ineichen, P., Stewart, R., & Menicucci, D. (1987). A new simplified version of the Perez diffuse irradiance model for tilted surfaces. Solar energy, 39 (3), 221-231.
[27] Handoyo, E. A., & Ichsani, D. (2013). The optimal tilt angle of a solar collector. Energy Procedia, 32, 166-175.
[28] Mehleri, E. D., Zervas, P. L., Sarimveis, H., Palyvos, J. A., & Markatos, N. C. (2010). Determination of the optimal tilt angle and orientation for solar photovoltaic arrays. Renewable Energy, 35 (11), 2468-2475.9].
[29] Kaddoura, T. O., Ramli, M. A., & Al-Turki, Y. A. (2016). On the estimation of the optimum tilt angle of PV panel in Saudi Arabia. Renewable and Sustainable Energy Reviews, 65, 626-634.
[30] Lan, H., Dai, J., Wen, S., Hong, Y. Y., Yu, D. C., & Bai, Y. (2015). Optimal Tilt Angle of Photovoltaic Arrays and Economic Allocation of Energy Storage System on Large Oil Tanker Ship. Energies, 8 (10), 11515-11530.
[31] Karafil, A., Ozbay, H., Kesler, M., & Parmaksiz, H. (2015, November). Calculation of optimum fixed tilt angle of PV panels depending on solar angles and comparison of the results with experimental study conducted in summer in Bilecik, Turkey. In 2015 9th International Conference on Electrical and Electronics Engineering (ELECO) (pp. 971-976). IEEE.
[32] Handoyo, E. A., & Ichsani, D. (2013). The optimal tilt angle of a solar collector. Energy Procedia, 32, 166-175.
[33] Jamil Ahmad, M., & N Tiwari, G. (2009). Optimization of tilt angle for solar collector to receive maximum radiation. The Open Renewable Energy Journal, 2 (1).
[34] Carroquino, J., Dufo-López, R., & Bernal-Agustín, J. L. (2015). Sizing of off-grid renewable energy systems for drip irrigation in Mediterranean crops. Renewable Energy, 76, 566-574.
[35] Waziri, N. H., Usman, A. M., Enaburekhan, J. S., & Babakano, A. (2014). Determination of Optimum Tilt Angle and Orientation of a Flat Plate Solar Collector for Different Periods in Kano.
[36] Calabrò, E. (2013). An algorithm to determine the optimum tilt angle of a solar panel from global horizontal solar radiation. Journal of Renewable Energy, 2013.
[37] Stackhouse, P. W., & Whitlock, C. H. (2008). Surface meteorology and Solar Energy (SSE) release 6.0, NASA SSE 6.0. Earth Science Enterprise Program, National Aeronautic and Space Administration (NASA), Langley, http://eosweb. larc. nasa. gov/sse. http://eosweb.larc.nasa.gov/sse.
Cite This Article
  • APA Style

    Okon Dominic Ekanem, James O. Onojo. (2017). Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model. American Journal of Software Engineering and Applications, 6(3), 80-84. https://doi.org/10.11648/j.ajsea.20170603.14

    Copy | Download

    ACS Style

    Okon Dominic Ekanem; James O. Onojo. Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model. Am. J. Softw. Eng. Appl. 2017, 6(3), 80-84. doi: 10.11648/j.ajsea.20170603.14

    Copy | Download

    AMA Style

    Okon Dominic Ekanem, James O. Onojo. Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model. Am J Softw Eng Appl. 2017;6(3):80-84. doi: 10.11648/j.ajsea.20170603.14

    Copy | Download

  • @article{10.11648/j.ajsea.20170603.14,
      author = {Okon Dominic Ekanem and James O. Onojo},
      title = {Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model},
      journal = {American Journal of Software Engineering and Applications},
      volume = {6},
      number = {3},
      pages = {80-84},
      doi = {10.11648/j.ajsea.20170603.14},
      url = {https://doi.org/10.11648/j.ajsea.20170603.14},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajsea.20170603.14},
      abstract = {In this paper, a method for the determination of the optimal tilt angle for yearly fixed flat-plate photovoltaic (PV) module at any given location is presented. The method is based on yearly global radiation incident on a horizontal plane as downloaded from NASA website. Futrthermore, PVSyst software that uses transposition model is used to generate the yearly global radiation incident on a tilted plane for various tilt angles, from 0° to 46°. The study is conducted for a health facility in Uyo, Akwa Ibom state, Nigeria with longitude of 7.860761, latitude of 5.011474 and elevation of 67.506 m. The optimal tilt angle is obtained from the quadratic trendline equation fitted to the graph of the transposition factor versus tilt angle. The result is that the optimal tilt angle for the yearly fixed flat-plate PV module at the selected Flocation is 9.71° which gives average yearly transposition factor 1.0105. Essential, the results indicate that about additional 1.05% of solar radiation will be captured per year by tilting the PV module at optimal tilt angle of 9.71°. At any other tilt angle less solar radiation will be captured per year.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Determination of Yearly Fixed Optimal Tilt Angle for Flat-Plate Photovoltaic Modules Based on Perez Transposition Model
    AU  - Okon Dominic Ekanem
    AU  - James O. Onojo
    Y1  - 2017/06/12
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ajsea.20170603.14
    DO  - 10.11648/j.ajsea.20170603.14
    T2  - American Journal of Software Engineering and Applications
    JF  - American Journal of Software Engineering and Applications
    JO  - American Journal of Software Engineering and Applications
    SP  - 80
    EP  - 84
    PB  - Science Publishing Group
    SN  - 2327-249X
    UR  - https://doi.org/10.11648/j.ajsea.20170603.14
    AB  - In this paper, a method for the determination of the optimal tilt angle for yearly fixed flat-plate photovoltaic (PV) module at any given location is presented. The method is based on yearly global radiation incident on a horizontal plane as downloaded from NASA website. Futrthermore, PVSyst software that uses transposition model is used to generate the yearly global radiation incident on a tilted plane for various tilt angles, from 0° to 46°. The study is conducted for a health facility in Uyo, Akwa Ibom state, Nigeria with longitude of 7.860761, latitude of 5.011474 and elevation of 67.506 m. The optimal tilt angle is obtained from the quadratic trendline equation fitted to the graph of the transposition factor versus tilt angle. The result is that the optimal tilt angle for the yearly fixed flat-plate PV module at the selected Flocation is 9.71° which gives average yearly transposition factor 1.0105. Essential, the results indicate that about additional 1.05% of solar radiation will be captured per year by tilting the PV module at optimal tilt angle of 9.71°. At any other tilt angle less solar radiation will be captured per year.
    VL  - 6
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical/Electronic Engineering, Federal University of Technology Owerri (FUTO), Owerri, Nigeria

  • Department of Electrical/Electronic Engineering, Federal University of Technology Owerri (FUTO), Owerri, Nigeria

  • Sections