Advances in Materials
Volume 3, Issue 4, August 2014, Pages: 27-32
Received: Sep. 19, 2014;
Accepted: Sep. 27, 2014;
Published: Sep. 30, 2014
Views 2707 Downloads 175
Elinwa Augustine Uchechukwu, Civil Engineering Department, Abubakar Tafawa Balewa Univerity, PMB 0248, Bauchi, Bauchi State, Nigeria
Maichibi Juliana Ezekiel, Nigerian Building and Road Research Institute, Plot 449, Samuel Ogedengbe Crescent, Jabi, Abuja, Nigeria
An evaluation of the Itakpe iron ore tailings (IOT) for concrete production has been carried out using the material to replace sand and cement, in proportions of 5 % up to 30 %, and curing for periods 90 days in water. Characterization of the material showed that it has pozzolanic properties, and can be used as a retarder for hot-weather concreting. Other characteristics of the IOT, as sand and cement replacements materials in concrete production exhibited improved workability and higher compressive strengths over the control strength with approximately 10 % and 38 % for sand and cement respectively. The linear regression models that were developed on the experimental data showed that they are significant and could be used to predict relationships of IOT-OPC concrete.
Elinwa Augustine Uchechukwu,
Maichibi Juliana Ezekiel,
Evaluation of the Iron Ore Tailings from Itakpe in Nigeria as Concrete Material, Advances in Materials.
Vol. 3, No. 4,
2014, pp. 27-32.
Ajaka E.O. (2004). “Recovering fine iron minerals from Itakpe iron ore process tailing”. ARPN Journal of Engineering and Applied Sciences, 4, (9), 17 – 27.
Umar, SY and Elinwa, AU. (2005). “Effects of IOT and lime on engineering properties of laterite. Journal of Raw Materials Research, 25, (4), 7.
Maichibi, JE. (2010). “Use of iron ore tailing in concrete production”. Unpublished BEng Thesis, Civil Engineering Department, Abubakar Tafawa Balewa University, Bauchi, Nigeria, 44p.
Prahallada, MC and Shanthappa, BC. (2014). “Use of copper tailings – as an excellent pozzolana in the preparation of concrete”. International Journal of Advanced Research in Engineering and Applied Sciences, 3, (3), 1 – 10.
Kiran, KS, Gopinatha N and Vipul, V. (2014). “Effect of red mud and iron ore tailings on the strength of self compacting concrete”. European Scientific Journal, 10, (21), 168 – 176.
Carrasco, EVM, Manlilla, JNR, Espósito, T and Moreira, LE (2013) “Compression performance of walls of interlocking bricks made of iron ore by-products and cement”. International Journal of Civil and Environmental Engineering, 13, (3), 56 -62.
Ravi, KCM, Anil, K, Prashanth, MH and Venkat, DR (2012). “Experimental studies on iron-ore tailing based interlocking paver blocks”. International Journal of Earth Sciences and Engineering, 5, (3), 501 – 504.
Kumar, BNS, Suhas, RR, Shet, SU and Srishaila, JM (2014). “Utilization of iron ore tailings as replacement to fine aggregates in cement concrete pavements”. International Journal of Research in Engineering and Technology, 3, (7), 369 – 376.
Bristish Standards Institution, BS 1881 Part 2: Methods of testing fresh concrete, London; 1970.
Bristish Standards Institution, BS 882: Specification for natural aggregates from natural sources for concrete; 1992.
ASTM C618-78. Specification for fly ash and raw or calcined natural pozzolana for use as a natural admixture in Portland cement concrete; 1978.