Mechanical and Reaction Properties of PTFE/Al/MnO<sub>2</sub> Reactive Materials at Different Strain Rates

Junyi Huang; Xiang Fang; Yuchun Li; Jiaxiang Wu; Jiaxing Song

doi:doi:10.11648/j.am.20180702.16

| Peer-Reviewed

Mechanical and Reaction Properties of PTFE/Al/MnO₂ Reactive Materials at Different Strain Rates

Junyi Huang, Xiang Fang, Yuchun Li, Jiaxiang Wu, Jiaxing Song

Published in Advances in Materials (Volume 7, Issue 2)

Received: 9 August 2018 Accepted: Published: 13 August 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The mechanical responses of the PTFE/Al/MnO₂ reactive material in the strain rate range of 10^-3~4×10³s^-1 were studied by a universal testing machine and split Hopkinson pressure bar (SHPB) system, and the microstructure of PTFE/Al/MnO₂ specimen was observed by Scanning Electron Microscope (SEM). Meanwhile, a standard drop-weight apparatus was used to reveal the reaction properties and impact sensitivity of the PTFE/Al/MnO₂ reactive material. The results demonstrate that under quasi-static compression conditions, the yield strength and compressive strength of PTFE/Al/MnO₂ specimens have obvious strain rate effects, while the elastic modulus and failure strain are insensitive to strain rate and remain almost unchanged. Under dynamic load conditions, the compressive strength of the PTFE/Al/MnO₂ specimen has a linear relationship with the logarithm of the strain rate, while the critical strain and the logarithm of the strain rate show a parabolic relationship. The established constitutive equation can describe the mechanical behavior of PTFE/Al/MnO₂ material at high strain rate well, which can provide a reference to the practical applications of the material. PAM specimens can react violently under the impact of a drop hammer, with intense light and a huge explosion sound. And the characteristic drop height of the PAM specimen was calculated as 58.13cm.

Published in	Advances in Materials (Volume 7, Issue 2)
DOI	10.11648/j.am.20180702.16
Page(s)	50-57
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

PTFE, Mechanical Responses, Split Hopkinson Pressure Bar (SHPB), Dynamic Performance, Constitutive Equation, Impact Sensitivity

References

[1]	Xie T, Jiang K, Ding Y. “Numerical simulation of influence of filler size on tribological properties of Cu/PTFE composites". Tribology. 2016, 36 (1):35-41. (in chinese).
[2]	He C X, Lu Q, Zhang J, Wan F X. “Friction and wear properties of PTFE filled with three kinds of nanostructured carbon materials". Journal of Materials Science &Engineering. 2010 (2):186-188.
[3]	Wang H X, Li Y C, Feng B, et al. “Compressive Properties of PTFE/Al/Ni Composite Under Uniaxial Loading". Journal of Materials Engineering & Performance, 2017, 26 (5):2331-2336.
[4]	Zhang J K, Wang P C, Wang L, Niu Y P, “Zhang Y Z. Tribological properties of PTFE composites filled with calcium sulphate whiskers". Lubrication Engineering. 2011, 36 (10):13-15.
[5]	Feng B, Fang X, Li Y C, et al. “Reactions of Al-PTFE under impact and quasi-static compression”. Advances in Materials Science & Engineering, 2015, 2015:1-6.
[6]	Xu S L, Yang S Q, “Research advance in mechanical performance of filled PTFE composite". Chemical Propellants & Polymeric Materials. 2008, 6 (6):8-12.
[7]	Zhang S J, Li Q Y, Che Y C, “Preparation and properties of composites of carbon black reinforced polytetrafluoroethylene prepared by a two-step process". Chinese Journal of Materials Research. 2016, 30 (6):427-437. (in chinese).
[8]	Li C, Sun T, Shi G J, “Polytetrafluoroethylenecomposites filled with mullite and their tribological performance". Chinese Journal of Materials Research. 2016, 30 (6):427-437).
[9]	Li L Q, Wu J B. “Explosive properties of the Mg-Al/PTFE composition". Chemical Intermediate. 2014 (5):30-33.
[10]	Hunt E M, Malcolm S, Pantoya M L, et al. “Impact ignition of nano and micron composite energetic materials”. International Journal of Impact Engineering, 2009, 36 (6):842-846.
[11]	Oguni K, Ravichandran G. “Dynamic compressive behavior of unidirectional E-glass/vinylester composites". Journal of Materials Science, 2001, 36 (4):831-838.
[12]	Ge C, Dong Y, Maimaitituersun W. Microscale “Simulation on mechanical properties of Al/PTFE composite based on real microstructures”. Materials, 2016, 9 (7):590.
[13]	Ouk Sub Lee, Kyu Sang Cho, Sung Hyun Kim, et al. “Dynamic deformation behavior of soft material using SHPB technique and pulse shaper". International Journal of Modern Physics B, 2006, 20 (25): 3571-3576.
[14]	Hsiao HM, Daniel IM, Cordes RD. “Dynamic compressive behavior of thick composite materials”. Experimental Mechanics 1998; 38:172-80.
[15]	Hsiao HM, Daniel IM, Cordes RD. “Strain rate effects on the transverse compressive and shear behavior of unidirectional composites". Journal of Composite Materials 1999; 33: 1620-42.
[16]	Wu J X, Fang X, Gao Z R, et al. “Investigation on mechanical properties and reaction characteristics of Al-PTFE composites with different Al particle size”. Advances in Materials Science & Engineering, 2018, 2018 (7):1-10.
[17]	Feng B, Fang X, Li Y C, et al. “An initiation phenomenon of Al-PTFE under quasi-static compression”. Chemical Physics Letters, 2015, 637:38-41.
[18]	Feng B, Li Y C, Wu S Z, et al. “A crack-induced initiation mechanism of Al-PTFE under quasi-static compression and the investigation of influencing factors”. Materials & Design, 2016, 108:411-417.
[19]	Feng B, Fang X, Wang H X, et al. “The effect of crystallinity on compressive properties of Al-PTFE”. Polymers, 2016, 8 (10):356.
[20]	Xu F Y, Liu S B, Zheng Y F, et al. “Quasi-static compression properties and failure of PTFE/Al/W reactive materials”. Advanced Engineering Materials, 2017, 19 (1).
[21]	Ge C, Maimaitituersun W, Dong Y, et al. “A study on the mechanical properties and impact-induced initiation characteristics of brittle PTFE/Al/W reactive materials”. Materials, 2017, 10 (5).
[22]	Wang L, Liu J, Li S, Zhang X. “Insensitive high-energy energetic structural material of tungsten-polytetrafluoroethylene-aluminum composites”. Aip Advances, 2015, 5 (11):169-174.
[23]	Zhou J, He Y, He Y, et al. “Quasi-static compression properties and impact energy release characteristics of Al/PTFE/W reactive materials”. Chinese Journal of Energetic Materials. 2017, 25 (11):903-912. (in chinese).
[24]	Ren H L, Liu X J, Chen Z Y. “Reaction behavior of Al/PTFE materials enhanced by W particles”. Acta Armamentarii. 2716, 37 (5):872-878. (in chinese).
[25]	Huang J Y, Fang X, Li Y C, et al. “The mechanical and reaction behavior of PTFE/Al/Fe2O3 under impact and quasi-static compression”. Advances in Materials Science and Engineering, 2017, 1-9.
[26]	Tao Z M, Fang X, LI Y C, et al. “Preparation and performances of reactive Al/Fe2O3/PTFE material”. Chinese Journal of Energetic Materials. 2016, 24 (8):781-786. (in chinese).
[27]	Hopkinson B. “A Method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets". Philosophical Transactions of the Royal Society of London, 1914, 213 (612):437-456.
[28]	Kolsky H. “An investigation of the mechanical properties of materials at very high rates of loading". Proceedings of the Physical Society B, 1949, 62 (11):676.
[29]	Blackstone, W. R.; Baber, B. B.; Ku, P. M. “New test techniques for evaluating the compatibility of materials with liquid oxygen under impact”. ASLE Transactions, 1968, 11 (3):216-227.
[30]	Johnson, G. R., Cook, W. H. “A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures” Proceedings from the 7th International Symposium on Ballistics, 1983: 541–547.
[31]	T. J. Holmquist, G. R. Johnson. “Determination of constants and comparison of results for various constitutive models". Journal de Physique Iv, 1991, IV 1 (C3):299-306.

Cite This Article

Plain Text BibTeX RIS

APA Style

Junyi Huang, Xiang Fang, Yuchun Li, Jiaxiang Wu, Jiaxing Song. (2018). Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Advances in Materials, 7(2), 50-57. https://doi.org/10.11648/j.am.20180702.16

Copy | Download

ACS Style

Junyi Huang; Xiang Fang; Yuchun Li; Jiaxiang Wu; Jiaxing Song. Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Adv. Mater. 2018, 7(2), 50-57. doi: 10.11648/j.am.20180702.16

Copy | Download

AMA Style

Junyi Huang, Xiang Fang, Yuchun Li, Jiaxiang Wu, Jiaxing Song. Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Adv Mater. 2018;7(2):50-57. doi: 10.11648/j.am.20180702.16

Copy | Download

@article{10.11648/j.am.20180702.16,
  author = {Junyi Huang and Xiang Fang and Yuchun Li and Jiaxiang Wu and Jiaxing Song},
  title = {Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates},
  journal = {Advances in Materials},
  volume = {7},
  number = {2},
  pages = {50-57},
  doi = {10.11648/j.am.20180702.16},
  url = {https://doi.org/10.11648/j.am.20180702.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20180702.16},
  abstract = {The mechanical responses of the PTFE/Al/MnO2 reactive material in the strain rate range of 10-3~4×103s-1 were studied by a universal testing machine and split Hopkinson pressure bar (SHPB) system, and the microstructure of PTFE/Al/MnO2 specimen was observed by Scanning Electron Microscope (SEM). Meanwhile, a standard drop-weight apparatus was used to reveal the reaction properties and impact sensitivity of the PTFE/Al/MnO2 reactive material. The results demonstrate that under quasi-static compression conditions, the yield strength and compressive strength of PTFE/Al/MnO2 specimens have obvious strain rate effects, while the elastic modulus and failure strain are insensitive to strain rate and remain almost unchanged. Under dynamic load conditions, the compressive strength of the PTFE/Al/MnO2 specimen has a linear relationship with the logarithm of the strain rate, while the critical strain and the logarithm of the strain rate show a parabolic relationship. The established constitutive equation can describe the mechanical behavior of PTFE/Al/MnO2 material at high strain rate well, which can provide a reference to the practical applications of the material. PAM specimens can react violently under the impact of a drop hammer, with intense light and a huge explosion sound. And the characteristic drop height of the PAM specimen was calculated as 58.13cm.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates
AU  - Junyi Huang
AU  - Xiang Fang
AU  - Yuchun Li
AU  - Jiaxiang Wu
AU  - Jiaxing Song
Y1  - 2018/08/13
PY  - 2018
N1  - https://doi.org/10.11648/j.am.20180702.16
DO  - 10.11648/j.am.20180702.16
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 50
EP  - 57
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20180702.16
AB  - The mechanical responses of the PTFE/Al/MnO2 reactive material in the strain rate range of 10-3~4×103s-1 were studied by a universal testing machine and split Hopkinson pressure bar (SHPB) system, and the microstructure of PTFE/Al/MnO2 specimen was observed by Scanning Electron Microscope (SEM). Meanwhile, a standard drop-weight apparatus was used to reveal the reaction properties and impact sensitivity of the PTFE/Al/MnO2 reactive material. The results demonstrate that under quasi-static compression conditions, the yield strength and compressive strength of PTFE/Al/MnO2 specimens have obvious strain rate effects, while the elastic modulus and failure strain are insensitive to strain rate and remain almost unchanged. Under dynamic load conditions, the compressive strength of the PTFE/Al/MnO2 specimen has a linear relationship with the logarithm of the strain rate, while the critical strain and the logarithm of the strain rate show a parabolic relationship. The established constitutive equation can describe the mechanical behavior of PTFE/Al/MnO2 material at high strain rate well, which can provide a reference to the practical applications of the material. PAM specimens can react violently under the impact of a drop hammer, with intense light and a huge explosion sound. And the characteristic drop height of the PAM specimen was calculated as 58.13cm.
VL  - 7
IS  - 2
ER  -

Copy | Download

Author Information

Junyi Huang

Institute of Battlefield Engineering, Army Engineering University, Nanjing, China
Xiang Fang

Institute of Battlefield Engineering, Army Engineering University, Nanjing, China
Yuchun Li

Institute of Battlefield Engineering, Army Engineering University, Nanjing, China
Jiaxiang Wu

Institute of Battlefield Engineering, Army Engineering University, Nanjing, China
Jiaxing Song

Institute of Battlefield Engineering, Army Engineering University, Nanjing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Junyi Huang, Xiang Fang, Yuchun Li, Jiaxiang Wu, Jiaxing Song. (2018). Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Advances in Materials, 7(2), 50-57. https://doi.org/10.11648/j.am.20180702.16

Copy | Download

ACS Style

Junyi Huang; Xiang Fang; Yuchun Li; Jiaxiang Wu; Jiaxing Song. Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Adv. Mater. 2018, 7(2), 50-57. doi: 10.11648/j.am.20180702.16

Copy | Download

AMA Style

Junyi Huang, Xiang Fang, Yuchun Li, Jiaxiang Wu, Jiaxing Song. Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates. Adv Mater. 2018;7(2):50-57. doi: 10.11648/j.am.20180702.16

Copy | Download

@article{10.11648/j.am.20180702.16,
  author = {Junyi Huang and Xiang Fang and Yuchun Li and Jiaxiang Wu and Jiaxing Song},
  title = {Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates},
  journal = {Advances in Materials},
  volume = {7},
  number = {2},
  pages = {50-57},
  doi = {10.11648/j.am.20180702.16},
  url = {https://doi.org/10.11648/j.am.20180702.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20180702.16},
  abstract = {The mechanical responses of the PTFE/Al/MnO2 reactive material in the strain rate range of 10-3~4×103s-1 were studied by a universal testing machine and split Hopkinson pressure bar (SHPB) system, and the microstructure of PTFE/Al/MnO2 specimen was observed by Scanning Electron Microscope (SEM). Meanwhile, a standard drop-weight apparatus was used to reveal the reaction properties and impact sensitivity of the PTFE/Al/MnO2 reactive material. The results demonstrate that under quasi-static compression conditions, the yield strength and compressive strength of PTFE/Al/MnO2 specimens have obvious strain rate effects, while the elastic modulus and failure strain are insensitive to strain rate and remain almost unchanged. Under dynamic load conditions, the compressive strength of the PTFE/Al/MnO2 specimen has a linear relationship with the logarithm of the strain rate, while the critical strain and the logarithm of the strain rate show a parabolic relationship. The established constitutive equation can describe the mechanical behavior of PTFE/Al/MnO2 material at high strain rate well, which can provide a reference to the practical applications of the material. PAM specimens can react violently under the impact of a drop hammer, with intense light and a huge explosion sound. And the characteristic drop height of the PAM specimen was calculated as 58.13cm.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Mechanical and Reaction Properties of PTFE/Al/MnO2 Reactive Materials at Different Strain Rates
AU  - Junyi Huang
AU  - Xiang Fang
AU  - Yuchun Li
AU  - Jiaxiang Wu
AU  - Jiaxing Song
Y1  - 2018/08/13
PY  - 2018
N1  - https://doi.org/10.11648/j.am.20180702.16
DO  - 10.11648/j.am.20180702.16
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 50
EP  - 57
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20180702.16
AB  - The mechanical responses of the PTFE/Al/MnO2 reactive material in the strain rate range of 10-3~4×103s-1 were studied by a universal testing machine and split Hopkinson pressure bar (SHPB) system, and the microstructure of PTFE/Al/MnO2 specimen was observed by Scanning Electron Microscope (SEM). Meanwhile, a standard drop-weight apparatus was used to reveal the reaction properties and impact sensitivity of the PTFE/Al/MnO2 reactive material. The results demonstrate that under quasi-static compression conditions, the yield strength and compressive strength of PTFE/Al/MnO2 specimens have obvious strain rate effects, while the elastic modulus and failure strain are insensitive to strain rate and remain almost unchanged. Under dynamic load conditions, the compressive strength of the PTFE/Al/MnO2 specimen has a linear relationship with the logarithm of the strain rate, while the critical strain and the logarithm of the strain rate show a parabolic relationship. The established constitutive equation can describe the mechanical behavior of PTFE/Al/MnO2 material at high strain rate well, which can provide a reference to the practical applications of the material. PAM specimens can react violently under the impact of a drop hammer, with intense light and a huge explosion sound. And the characteristic drop height of the PAM specimen was calculated as 58.13cm.
VL  - 7
IS  - 2
ER  -

Copy | Download