Advances in Materials

| Peer-Reviewed |

Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite

Received: 09 October 2017    Accepted: 24 October 2017    Published: 24 November 2017
Views:       Downloads:

Share This Article

Abstract

Natural fiber (such as flax, hemp, jute, kenaf, etc.) reinforced polymer resin composites are biodegradable composites as they are using fibers from renewable sources. It is also better than synthetic fibers (such as glass, carbon, ceramic fibers, etc.) in a sense of environmental cause. In this research work, jute fiber reinforced polypropylene matrix composites have been developed using hot compression molding technique. Various process parameters are used such as fiber condition (untreated and alkali treated), fiber sizes (1, 2 and 4 mm) and percentages (5%, 10% and 15% by weight) in this research work. Tensile test and optical microscopy are used for characterization. Effect of tensile strength has a linear relation with fiber size and fiber percentage but after a certain size and percentage, the tensile strength shows an inverse relation with the fiber length and fiber percentage. There is no significant change has been observed for treated and untreated jute fiber reinforcement.

DOI 10.11648/j.am.20170606.15
Published in Advances in Materials (Volume 6, Issue 6, December 2017)
Page(s) 149-153
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Natural Fiber, Jute Fiber, Polypropylene, Composite, Tensile Strength

References
[1] Gassan, J. and Bledzki, A. K. (1997): Influence of Fiber-Surface Treatment on The Mechanical Properties of Jute-Polypropylene Composites, Composites - Part A: Applied Science and Manufacturing, Vol. 28, No. 12, pp. 1001-1005.
[2] Beg, M. D. H. and Pickering, K. L. (2004): Effect of Fiber Pretreatment on the Mechanical Properties of Wood/Polypropylene Composites, Proceedings of SPPM, 25-27 February 2004, Dhaka, pp. 240-247.
[3] Karnani, R., Krishnan, M. and Narayan, R. (1997): Biofiber-Reinforced Polypropylene Composites, Polymer Engineering and Science, Vol. 37, No. 2, pp. 476-483.
[4] Mohanty, S., Nayak, S. K., Verma, S. K. and Tripathy, S. S. (2004): Effect of MAPP as a Coupling Agent on the Performance of Jute-PP Composites, Journal of Reinforced Plastics and Composites, Vol. 23, No. 6, pp. 625-637.
[5] Alam, S. N., Pickering, K. L. and Fernyhough, A. (2004): The Characterization of Natural Fibers & Their Interfacial & Composite Properties, Proceedings of SPPM, 25-27 February 2004, Dhaka, pp. 248-256.
[6] Wollerdorfer, M. and Bader, H. (1998): Influence of Natural Fibres on the Mechanical Properties of Biodegradable Polymers, Industrial Crops and Products, Vol. 8, No. pp. 105-112.
[7] Joseph, S., Thomas, S., Sreekala, M. S., Oommen, Z. and Koshy, P. (2002): A Comparison of the Mechanical Properties of Phenol Formaldehyde Composites Reinforced With Banana Fibres And Glass Fibres, Composites Science and Technology, Vol. 62, No. 14, pp. 1857-1868.
[8] H. M. M. A. Rashed, M. A. Islam and F. B. Rizvi (2006); Effects of Process Parameters on Tensile Strength of Jute Fiber Reinforced Thermoplastic Composites, Journal of Naval Architecture and Marine Engineering 3(2006) pp 1-6.
[9] Tazdik Patwary Plateau, Md. Majidul Haque Bhuiyan (2017), A Heuristic Proposition of Efficient Copper-Electrodeposited p-type Thin Film for CZTS Solar Cell, Electrical, Computer and Communication Engineering (ECCE), International Conference(2017), DOI: 10.1109/ECACE.2017.7912887.
[10] William D. Callister, Jr., Materials Science and Engineering, An Introduction, Seventinth Edition.
Author Information
  • Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

Cite This Article
  • APA Style

    Tazdik Patwary Plateau. (2017). Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite. Advances in Materials, 6(6), 149-153. https://doi.org/10.11648/j.am.20170606.15

    Copy | Download

    ACS Style

    Tazdik Patwary Plateau. Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite. Adv. Mater. 2017, 6(6), 149-153. doi: 10.11648/j.am.20170606.15

    Copy | Download

    AMA Style

    Tazdik Patwary Plateau. Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite. Adv Mater. 2017;6(6):149-153. doi: 10.11648/j.am.20170606.15

    Copy | Download

  • @article{10.11648/j.am.20170606.15,
      author = {Tazdik Patwary Plateau},
      title = {Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite},
      journal = {Advances in Materials},
      volume = {6},
      number = {6},
      pages = {149-153},
      doi = {10.11648/j.am.20170606.15},
      url = {https://doi.org/10.11648/j.am.20170606.15},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.am.20170606.15},
      abstract = {Natural fiber (such as flax, hemp, jute, kenaf, etc.) reinforced polymer resin composites are biodegradable composites as they are using fibers from renewable sources. It is also better than synthetic fibers (such as glass, carbon, ceramic fibers, etc.) in a sense of environmental cause. In this research work, jute fiber reinforced polypropylene matrix composites have been developed using hot compression molding technique. Various process parameters are used such as fiber condition (untreated and alkali treated), fiber sizes (1, 2 and 4 mm) and percentages (5%, 10% and 15% by weight) in this research work. Tensile test and optical microscopy are used for characterization. Effect of tensile strength has a linear relation with fiber size and fiber percentage but after a certain size and percentage, the tensile strength shows an inverse relation with the fiber length and fiber percentage. There is no significant change has been observed for treated and untreated jute fiber reinforcement.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Evaluation of Tensile Strength of Jute Fiber Reinforced Polypropylene Composite
    AU  - Tazdik Patwary Plateau
    Y1  - 2017/11/24
    PY  - 2017
    N1  - https://doi.org/10.11648/j.am.20170606.15
    DO  - 10.11648/j.am.20170606.15
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 149
    EP  - 153
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20170606.15
    AB  - Natural fiber (such as flax, hemp, jute, kenaf, etc.) reinforced polymer resin composites are biodegradable composites as they are using fibers from renewable sources. It is also better than synthetic fibers (such as glass, carbon, ceramic fibers, etc.) in a sense of environmental cause. In this research work, jute fiber reinforced polypropylene matrix composites have been developed using hot compression molding technique. Various process parameters are used such as fiber condition (untreated and alkali treated), fiber sizes (1, 2 and 4 mm) and percentages (5%, 10% and 15% by weight) in this research work. Tensile test and optical microscopy are used for characterization. Effect of tensile strength has a linear relation with fiber size and fiber percentage but after a certain size and percentage, the tensile strength shows an inverse relation with the fiber length and fiber percentage. There is no significant change has been observed for treated and untreated jute fiber reinforcement.
    VL  - 6
    IS  - 6
    ER  - 

    Copy | Download

  • Sections