| Peer-Reviewed

Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline

Received: 19 April 2014    Accepted: 4 May 2014    Published: 20 May 2014
Views:       Downloads:
Abstract

In this study, 4-Methoxy-N-(3-phenylallylidene) aniline has been synthesized and characterized by FTIR and NMR spectroscopic techniques. The optimized geometrical structure, vibrational frequencies and NMR shifts of title molecule were obtained by using ab initio HF and density functional method (B3LYP) with 6-31G* basis set. The experimental and calculated geometrical parameters were compared with each other. The calculated infrared (IR) and NMR data were compared with experimental values using HF and B3LYP/6-31G* level of theory. It was found to be a good correlation between experimental and calculated data. In addition, HOMO and LUMO analysis of title molecule were calculated using corresponding methods with 6-31G* basis set. The calculated HOMO-LUMO energies were used to calculate some properties of title molecule.

Published in American Journal of Physical Chemistry (Volume 3, Issue 2)
DOI 10.11648/j.ajpc.20140302.13
Page(s) 19-25
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

4-Methoxy-N-(3-Phenylallylidene) Aniline, B3LYP, Hartree–Fock, IR and NMR Spectra, HOMO-LUMO

References
[1] A.S. Munde, A.N. Jagdale, S.M. Jadhav, T.K. Chondhekar, Synthesis, characterization and thermal study of some transition metal complexes of an asymmetrical tetradentate Schiff base ligand, J. Serb. Chem. Soc. 75 (2010) 349–359.
[2] F. Faridbod, M.R. Ganjali, R. Dinarvand, P. Norouzi, S. Riahi, Schiff’s Bases and Crown Ethers as Supramolecular Sensing Materials in the Construction of Potentiometric Membrane Sensors, Sensors. 8 (2008) 1645–1703.
[3] R.W. Layer, The Chemistry of Imines., Chem. Rev. 63 (1963) 489–510.
[4] Q. Zhao, C. Shen, H. Zheng, J. Zhang, P. Zhang, Synthesis, characterization, and cytotoxicity of some novel glycosyl thiazol-2-imines as antitumoral agents., Carbohydr. Res. 345 (2010) 437–41.
[5] O. Bekircan, B. Kahveci, M. Küçük, Synthesis and Anticancer Evaluation of Some New Unsymmetrical 3,5-Diaryl-4H-1,2,4-Triazole Derivatives., Turkish J. Chem. 30 (2006) 29–40.
[6] L. Shi, H.-M. Ge, S.-H. Tan, H.-Q. Li, Y.-C. Song, H.-L. Zhu, et al., Synthesis and antimicrobial activities of Schiff bases derived from 5-chloro-salicylaldehyde., Eur. J. Med. Chem. 42 (2007) 558–64.
[7] N. Ghanwate, A. RAUT, A. Doshi, Synthesis and antimicrobial properties of Flavone imines, Orient. J. Chem. 24 (2008) 721–724.
[8] A. Jarrahpour, D. Khalili, E. De Clercq, C. Salmi, J.M. Brunel, Synthesis, antibacterial, antifungal and antiviral activity evaluation of some new bis-Schiff bases of isatin and their derivatives., Molecules. 12 (2007) 1720–30.
[9] G.K. Gomma, M.H. Wahdan, Schiff bases as corrosion inhibitors for aluminium in hydrochloric acid solution., Mater. Chem. Phys. 39 (1995) 209–213.
[10] R.K. Upadhyay, S.P. Mathur, Effect of Schiff’s Bases as Corrosion Inhibitors on Mild Steel in Sulphuric Acid, E-J.Chem. 4 (2007) 408–414.
[11] Y. Bekdemir, K. Efil, Microwave Assisted Solvent-free Synthesis of Some Imine Derivatives., Org. Chem. Int. 2014 (2014) 5.
[12] M.J. Frisch, G.W. Trucks, H.B. Schlegel, G.E. Scuseria, M.A. Robb, J.R. Cheeseman, et al., Gaussian 03, Revision E.01, (2004).
[13] R. Dennington II, T. Keith, J. Mil-lam, Gauss View Version 4.1.2, (2007).
[14] J.B. Foresman, Ae. Frisch, Exploring Chemistry With Electronic Structure Methods: A Guide to Using Gaussian, 2nd ed., Gaussian, Inc, Pittsburgh, PA, 1996.
[15] R. Ditchfield, Molecular Orbital Theory of Magnetic Shielding and Magnetic Susceptibility., J. Chem. Phys. 56 (1972) 5688.
[16] K. Wolinski, J.F. Hinton, P. Pulay, Efficient implementation of the gauge-independent atomic orbital method for NMR chemical shift calcu-lations., J. Am. Chem. Soc. 112 (1990) 8251–8260.
[17] Y. Li, X.-L. He, X.-Y. Yang, 4-Methoxy-N-(3-phenylallylidene) aniline., Acta Crystallogr. Sect. E. 63 (2007) o4546.
[18] B.H. Stuart, Infrared Spectroscopy: Fundamentals and Applications (Analytical Techniques in the Sciences (AnTs) *), Wiley & Sons Ltd, Chichester, UK, 2004.
[19] T.N. Sorrell, Organic chemi-stry, 2nd ed., University Science Books, 2006.
[20] L.H. Abdel-Rahman, R.M. El-Khatib, L.A.E. Nassr, A.M. Abu-Dief, M. Ismael, A.A. Seleem, Metal based pharmacologically active agents: syn-thesis, structural characterization, molecular modeling, CT-DNA binding studies and in vitro an-timicrobial screening of iron(II) bromosalicylidene amino acid chelates., Spectrochim. Acta. A. Mol. Biomol. Spectrosc. 117 (2014) 366–78.
[21] L.D.S. Yadav, Organic Spectroscopy, Springer, 2005.
[22] R.M. Silverstein, F.X. Webster, Spectrometric Identification of Organic Compounds, 6th ed., John Wiley & Sons, Inc, New York, 1998.
[23] R. J Anderson, D. J Bendell, P. W Groundwater, Organic Spectroscopic Analysis., Royal Society of Chemistry, Cambridge, 2004.
[24] I. Fleming, Frontier orbitals and organic chemical reactions, Wiley, London, 1976.
[25] B. Kosar, C. Albayrak, Spectroscopic investigations and quantum chemical compu-tational study of (E)-4-methoxy-2-[(p-tolylimino)methyl]phenol., Spectrochim. Acta A. 78 (2011) 160–167.
[26] N.O. Obi-Egbedi, I.B. Obot, M.I. El-Khaiary, Quantum chemical investigation and statistical analysis of the relationship between corrosion inhibition efficiency and molecular structure of xanthene and its derivatives on mild steel in sulphuric acid., J. Mol. Struct. 1002 (2011) 86–96.
[27] R.G. PEARSON, Absolute electronegativity and hardness correlated with molecular orbital theory., Proc. Nati. Acad. Sci. USA. 83 (1986) 8440–8441.
[28] T. Koopmans, Über die Zuordnung von Wellenfunktionen und Eigenwerten zu den Einzelnen Elektronen Eines Atoms., Physica. 1 (1934) 104–113.
[29] R. Mulliken, A New Electroaffinity Scale; Together with Data on Valence States and on Valence Ionization Potentials and Electron Affinities., J. Chem. Phys. 2 (1934) 782.
[30] R.G. Parr, R.G. Pearson, Absolute hardness: companion parameter to absolute electronegativity, J. Am. Chem. Soc. 105 (1983) 7512–7516.
[31] R.G. Parr, L. v. Szentpály, S. Liu, Electrophilicity Index, J. Am. Chem. Soc. 121 (1999) 1922–1924.
[32] R.G. Parr, W. Yang, Density Functional Theory for Atoms and Molecules, Oxford University Press, New York, 1982.
[33] R.G. Pearson, Chemical hardness, John Wiley-VCH, Weinheim, 1997.
[34] A. Lesar, I. Milošev, Density functional study of the corrosion inhibition properties of 1,2,4-triazole and its amino derivatives, Chem. Phys. Lett. 483 (2009) 198–203.
Cite This Article
  • APA Style

    Kürşat Efil, Yunus Bekdemir. (2014). Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline. American Journal of Physical Chemistry, 3(2), 19-25. https://doi.org/10.11648/j.ajpc.20140302.13

    Copy | Download

    ACS Style

    Kürşat Efil; Yunus Bekdemir. Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline. Am. J. Phys. Chem. 2014, 3(2), 19-25. doi: 10.11648/j.ajpc.20140302.13

    Copy | Download

    AMA Style

    Kürşat Efil, Yunus Bekdemir. Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline. Am J Phys Chem. 2014;3(2):19-25. doi: 10.11648/j.ajpc.20140302.13

    Copy | Download

  • @article{10.11648/j.ajpc.20140302.13,
      author = {Kürşat Efil and Yunus Bekdemir},
      title = {Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline},
      journal = {American Journal of Physical Chemistry},
      volume = {3},
      number = {2},
      pages = {19-25},
      doi = {10.11648/j.ajpc.20140302.13},
      url = {https://doi.org/10.11648/j.ajpc.20140302.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpc.20140302.13},
      abstract = {In this study, 4-Methoxy-N-(3-phenylallylidene) aniline has been synthesized and characterized by FTIR and NMR spectroscopic techniques. The optimized geometrical structure, vibrational frequencies and NMR shifts of title molecule were obtained by using ab initio HF and density functional method (B3LYP) with 6-31G* basis set. The experimental and calculated geometrical parameters were compared with each other. The calculated infrared (IR) and NMR data were compared with experimental values using HF and B3LYP/6-31G* level of theory. It was found to be a good correlation between experimental and calculated data. In addition, HOMO and LUMO analysis of title molecule were calculated using corresponding methods with 6-31G* basis set. The calculated HOMO-LUMO energies were used to calculate some properties of title molecule.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Theoretical and Experimental Investigations on Molecular Structure, IR, NMR Spectra and HOMO-LUMO Analysis of 4-Methoxy-N-(3-Phenylallylidene) Aniline
    AU  - Kürşat Efil
    AU  - Yunus Bekdemir
    Y1  - 2014/05/20
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ajpc.20140302.13
    DO  - 10.11648/j.ajpc.20140302.13
    T2  - American Journal of Physical Chemistry
    JF  - American Journal of Physical Chemistry
    JO  - American Journal of Physical Chemistry
    SP  - 19
    EP  - 25
    PB  - Science Publishing Group
    SN  - 2327-2449
    UR  - https://doi.org/10.11648/j.ajpc.20140302.13
    AB  - In this study, 4-Methoxy-N-(3-phenylallylidene) aniline has been synthesized and characterized by FTIR and NMR spectroscopic techniques. The optimized geometrical structure, vibrational frequencies and NMR shifts of title molecule were obtained by using ab initio HF and density functional method (B3LYP) with 6-31G* basis set. The experimental and calculated geometrical parameters were compared with each other. The calculated infrared (IR) and NMR data were compared with experimental values using HF and B3LYP/6-31G* level of theory. It was found to be a good correlation between experimental and calculated data. In addition, HOMO and LUMO analysis of title molecule were calculated using corresponding methods with 6-31G* basis set. The calculated HOMO-LUMO energies were used to calculate some properties of title molecule.
    VL  - 3
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Canik Ba?ar? University, Faculty of Arts and Sciences, Department of Molecular Biology and Genetics, 55080-Samsun, Turkey

  • Sections