Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring

Wang Hong-wei

doi:doi:10.11648/j.ijmsa.20160502.19

| Peer-Reviewed

Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring

Wang Hong-wei

Published in International Journal of Materials Science and Applications (Volume 5, Issue 2)

Received: 3 May 2016 Accepted: Published: 4 May 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the ANASYS finite element simulation software, the modal simulation of the ring structure of the 2-2 type piezoelectric composite is carried out, and the relationship curve of the bandwidth and the structure size is obtained. Based on the simulation, a design scheme is formed, cutting circular piezoelectric ceramics along the axial direction, there is epoxy resin in the groove. Thus the 2-2 type piezoelectric composite circular tube is formatted. The piezoelectric composite circular tubes suitable for horizontal omnidirectional broadband transducer.

Published in	International Journal of Materials Science and Applications (Volume 5, Issue 2)
DOI	10.11648/j.ijmsa.20160502.19
Page(s)	89-94
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

2-2 Piezoelectric Composite, Simulation, Fabrication, Properties

References

[1]	Li Li.1 -3 type of piezoelectric composite materials and underwater acoustic transducer research. Beijing University of Posts and Telecommunications doctoral dissertation. May 2008.
[2]	Bin Zhang, Likun Wang, Lei Qin etc. Influence of Volume Fraction of Piezoelectric Ceramics on Popertiesof PZT672/Epoxy1-3 Piezocomposite. Advanced Materials Research Vols. 989-994 (2014) pp 364-368.
[3]	Chen Junbo, Wang Yuebing, Zhong Lin Jian. 1-3 type piezoelectric composite and ordinary PZT transducer performance contrast analysis. Acoustic and electronic engineering, 2007 (3): p25-27.
[4]	Sherman C H, Butler J L. Transducers and arrays for underwater sound [M]. Springer, 2007.
[5]	Christopher J, Purcell A, Richard F. Multi-mode pipe projector: United States, 6584039 [P]. 2003-06-24.
[6]	Alexander L. Butler, John L. Bultler•Multi Ply Resonant Wideband Transducer APP aratus, 2005, US6950373B2.
[7]	Xian Xiaojun, Lin Shuyu, Deng pan Wang, Ma chin Yi. Based on 1-3-2 type piezoelectric composite electric broadband acoustic transducer, piezoelectric and acoustooptic, Vol 36 No. 4, August 2014.P491-497.
[8]	Coehran S, Parker M, Franeh P M. Ultrabroadband single crystal composite Transducers for underwater ultrasound. IEEE Ultrasonics Symposium. Netherlands, 2005: 231-234P.
[9]	Elmash I C, Koymen H A. A wideband and a wid-beamwidth acoustic transducer design for underwater acoustic communications. OCEANS 2006-Asia Pacific. SingaPore, 2007: l-5P.
[10]	Zhi T, Yongae R, Wonho K. Optimal design of an underwater Piezocomposite ring transducer. IEEE Ultrasonic symposium. China, 2008: 1405-1408P.

Cite This Article

Plain Text BibTeX RIS

APA Style

Wang Hong-wei. (2016). Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. International Journal of Materials Science and Applications, 5(2), 89-94. https://doi.org/10.11648/j.ijmsa.20160502.19

Copy | Download

ACS Style

Wang Hong-wei. Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. Int. J. Mater. Sci. Appl. 2016, 5(2), 89-94. doi: 10.11648/j.ijmsa.20160502.19

Copy | Download

AMA Style

Wang Hong-wei. Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. Int J Mater Sci Appl. 2016;5(2):89-94. doi: 10.11648/j.ijmsa.20160502.19

Copy | Download

@article{10.11648/j.ijmsa.20160502.19,
  author = {Wang Hong-wei},
  title = {Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring},
  journal = {International Journal of Materials Science and Applications},
  volume = {5},
  number = {2},
  pages = {89-94},
  doi = {10.11648/j.ijmsa.20160502.19},
  url = {https://doi.org/10.11648/j.ijmsa.20160502.19},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20160502.19},
  abstract = {High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the ANASYS finite element simulation software, the modal simulation of the ring structure of the 2-2 type piezoelectric composite is carried out, and the relationship curve of the bandwidth and the structure size is obtained. Based on the simulation, a design scheme is formed, cutting circular piezoelectric ceramics along the axial direction, there is epoxy resin in the groove. Thus the 2-2 type piezoelectric composite circular tube is formatted. The piezoelectric composite circular tubes suitable for horizontal omnidirectional broadband transducer.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring
AU  - Wang Hong-wei
Y1  - 2016/05/04
PY  - 2016
N1  - https://doi.org/10.11648/j.ijmsa.20160502.19
DO  - 10.11648/j.ijmsa.20160502.19
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 89
EP  - 94
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20160502.19
AB  - High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the ANASYS finite element simulation software, the modal simulation of the ring structure of the 2-2 type piezoelectric composite is carried out, and the relationship curve of the bandwidth and the structure size is obtained. Based on the simulation, a design scheme is formed, cutting circular piezoelectric ceramics along the axial direction, there is epoxy resin in the groove. Thus the 2-2 type piezoelectric composite circular tube is formatted. The piezoelectric composite circular tubes suitable for horizontal omnidirectional broadband transducer.
VL  - 5
IS  - 2
ER  -

Copy | Download

Author Information

Wang Hong-wei

Science College, Beijing Information Science and Technology University, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Wang Hong-wei. (2016). Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. International Journal of Materials Science and Applications, 5(2), 89-94. https://doi.org/10.11648/j.ijmsa.20160502.19

Copy | Download

ACS Style

Wang Hong-wei. Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. Int. J. Mater. Sci. Appl. 2016, 5(2), 89-94. doi: 10.11648/j.ijmsa.20160502.19

Copy | Download

AMA Style

Wang Hong-wei. Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring. Int J Mater Sci Appl. 2016;5(2):89-94. doi: 10.11648/j.ijmsa.20160502.19

Copy | Download

@article{10.11648/j.ijmsa.20160502.19,
  author = {Wang Hong-wei},
  title = {Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring},
  journal = {International Journal of Materials Science and Applications},
  volume = {5},
  number = {2},
  pages = {89-94},
  doi = {10.11648/j.ijmsa.20160502.19},
  url = {https://doi.org/10.11648/j.ijmsa.20160502.19},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20160502.19},
  abstract = {High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the ANASYS finite element simulation software, the modal simulation of the ring structure of the 2-2 type piezoelectric composite is carried out, and the relationship curve of the bandwidth and the structure size is obtained. Based on the simulation, a design scheme is formed, cutting circular piezoelectric ceramics along the axial direction, there is epoxy resin in the groove. Thus the 2-2 type piezoelectric composite circular tube is formatted. The piezoelectric composite circular tubes suitable for horizontal omnidirectional broadband transducer.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring
AU  - Wang Hong-wei
Y1  - 2016/05/04
PY  - 2016
N1  - https://doi.org/10.11648/j.ijmsa.20160502.19
DO  - 10.11648/j.ijmsa.20160502.19
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 89
EP  - 94
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20160502.19
AB  - High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the ANASYS finite element simulation software, the modal simulation of the ring structure of the 2-2 type piezoelectric composite is carried out, and the relationship curve of the bandwidth and the structure size is obtained. Based on the simulation, a design scheme is formed, cutting circular piezoelectric ceramics along the axial direction, there is epoxy resin in the groove. Thus the 2-2 type piezoelectric composite circular tube is formatted. The piezoelectric composite circular tubes suitable for horizontal omnidirectional broadband transducer.
VL  - 5
IS  - 2
ER  -

Copy | Download