International Journal of Materials Science and Applications

| Peer-Reviewed |

Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending

Received: 18 January 2016    Accepted:     Published: 20 January 2016
Views:       Downloads:

Share This Article

Abstract

This paper deal with redistribution of chemical elements around cladding surface of composite tube. Motivation is that change of chemical composition cause change in microstructure and mainly changes in mechanical properties. Local changes of mechanical properties can cause inaccuracy or wrong results obtained from FEM modeling of bending process of cladding tube. In short paper present redistribution of chemical elements caused by heat input during production of tube. Redistribution caused by heat input from weld attachment of connector which is used during production of membrane waterwall is discussed. Microstructure evaluation of base material and cladding layer is compared with measurement of hardness. Measurement of microhardness in specific areas of cladding tube was done. Microhardness is compared with measurement of chemical composition via EDX in scanning electron microscope.

DOI 10.11648/j.ijmsa.20150406.16
Published in International Journal of Materials Science and Applications (Volume 4, Issue 6, November 2015)
Page(s) 403-408
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Cladding Tube, Welded Joint, SEM, Light Microscopy, Diffusion

References
[1] Otsuka, N.-Fujikava, H.: Corrosion-vol. 47, No.4, NACE 1991.
[2] Tossey, Brett, Khan, Hassan: Steam Oxidation Resistance of Shot Peened Austenitic Stainless Steel Superheater Tubes, NACE CORROSION 2011 (Paper 19493).
[3] Composite tube for boilers. Sandvik Materials Technology [online]. Sandviken, Sweden [cit. 2015-11-06]. Available from: http://smt.sandvik.com/en/products/tube-pipe-fittings-and-flanges/tubular-products/composite-tubes/
[4] Sandvik Bioline 3R12: Tube and pipe, seamless. Sandvik Materials Technology [online]. Sandviken, Sweden, 16.9.2015 [cit. 2015-11-06]. Available from: http://smt.sandvik.com/en/materials-center/material-datasheets/tube-and-pipe-seamless/sandvik-bioline-3r12/
[5] Sandvik 4L7: Tube and pipe, seamless. Sandvik Materials Technology [online]. Sandviken, Sweden, 8.6.2015 [cit. 2015-11-06]. Available from: http://smt.sandvik.com/en/materials-center/material-datasheets/tube-and-pipe-seamless/sandvik-4l7
[6] L. Horváth, M. Svobodová, T. Chmela, I. Andršová and J. Horváth. “Odborná zpráva o postupu prací a dosažených výsledcích za rok 2013, Číslo projektu: TA03010150: Výzkum vlastností a chování tlustostěnných plátovaných trub-kových ohybů v podmínkách ekonomicky významných aplikací, včetně zvládnutí jejich výroby ověřené certifikovaným orgánem s evropskou působností.’’ Praha, 2014.
[7] J. Horváth, J. Janovec, “Modeling and verification of the cladding tube bend’’, IJESRT, vol.4, October, 15, 2015.
[8] M. Smejkal “Stanovení odhadu plastické defrmace plátované trubky z materiálů Sanicro 38 a 4L7 při ohybu s indukčním ohřevem’’: Praha, 2014.
[9] R. E. Smallman, A. H. W. NGAN, Modern Physical Metallurgy, 8th Ed., Butterworth-Heinemann, 2013.
[10] Steels - Micrographic determination of the apparent grain size (ISO 643:2013). Praha, 2013.
Author Information
  • Department of Material Engineering, Mechanical Faculty, Czech Technical University, Prague, Czech Republic

  • Department of Material Engineering, Mechanical Faculty, Czech Technical University, Prague, Czech Republic

Cite This Article
  • APA Style

    Jakub Horváth, Jiří Janovec, Michal Junek. (2016). Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending. International Journal of Materials Science and Applications, 4(6), 403-408. https://doi.org/10.11648/j.ijmsa.20150406.16

    Copy | Download

    ACS Style

    Jakub Horváth; Jiří Janovec; Michal Junek. Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending. Int. J. Mater. Sci. Appl. 2016, 4(6), 403-408. doi: 10.11648/j.ijmsa.20150406.16

    Copy | Download

    AMA Style

    Jakub Horváth, Jiří Janovec, Michal Junek. Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending. Int J Mater Sci Appl. 2016;4(6):403-408. doi: 10.11648/j.ijmsa.20150406.16

    Copy | Download

  • @article{10.11648/j.ijmsa.20150406.16,
      author = {Jakub Horváth and Jiří Janovec and Michal Junek},
      title = {Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending},
      journal = {International Journal of Materials Science and Applications},
      volume = {4},
      number = {6},
      pages = {403-408},
      doi = {10.11648/j.ijmsa.20150406.16},
      url = {https://doi.org/10.11648/j.ijmsa.20150406.16},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmsa.20150406.16},
      abstract = {This paper deal with redistribution of chemical elements around cladding surface of composite tube. Motivation is that change of chemical composition cause change in microstructure and mainly changes in mechanical properties. Local changes of mechanical properties can cause inaccuracy or wrong results obtained from FEM modeling of bending process of cladding tube. In short paper present redistribution of chemical elements caused by heat input during production of tube. Redistribution caused by heat input from weld attachment of connector which is used during production of membrane waterwall is discussed. Microstructure evaluation of base material and cladding layer is compared with measurement of hardness. Measurement of microhardness in specific areas of cladding tube was done. Microhardness is compared with measurement of chemical composition via EDX in scanning electron microscope.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Influence of the Diffusion Effect Caused by Welding Heat Input Lead to the Changes of Mechanical Properties Which Entering into the FEM Model of Cladding Tube Bending
    AU  - Jakub Horváth
    AU  - Jiří Janovec
    AU  - Michal Junek
    Y1  - 2016/01/20
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijmsa.20150406.16
    DO  - 10.11648/j.ijmsa.20150406.16
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 403
    EP  - 408
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20150406.16
    AB  - This paper deal with redistribution of chemical elements around cladding surface of composite tube. Motivation is that change of chemical composition cause change in microstructure and mainly changes in mechanical properties. Local changes of mechanical properties can cause inaccuracy or wrong results obtained from FEM modeling of bending process of cladding tube. In short paper present redistribution of chemical elements caused by heat input during production of tube. Redistribution caused by heat input from weld attachment of connector which is used during production of membrane waterwall is discussed. Microstructure evaluation of base material and cladding layer is compared with measurement of hardness. Measurement of microhardness in specific areas of cladding tube was done. Microhardness is compared with measurement of chemical composition via EDX in scanning electron microscope.
    VL  - 4
    IS  - 6
    ER  - 

    Copy | Download

  • Sections