A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications

Jun Natsuki; Toshiaki Natsuki; Yoshio Hashimoto

doi:doi:10.11648/j.ijmsa.20150405.17

| Peer-Reviewed

A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications

Jun Natsuki, Toshiaki Natsuki, Yoshio Hashimoto

Published in International Journal of Materials Science and Applications (Volume 4, Issue 5)

Received: 28 August 2015 Accepted: 19 September 2015 Published: 29 September 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In recent years, nanoparticles of noble metals such as gold, silver and palladium have drawn immense attention due to the wide range of new applications in various fields of industry. Particularly, silver nanoparticles have significant interest in medical applications such as very effective antibacterial agents without the toxic effects, and industry application such as inkjet inks containing well uniform dispersions of nano-sized silver particles that are useful for producing electronic circuits. It is important that the silver nanoparticles require not only the particles to be of nano-size, but also synthesis of the nanoparticles to be produced easily and at low cost. Over the past few decades, many synthetic methods of silver nanoparticles have been studied. This paper aims to review different synthesis routes of silver nanoparticles and their applications. In particular, we mainly present several chemical approaches to preparing silver nanoparticles and their properties as well as applications based on our recent studies. The focus is on effective and efficient synthesis of pure colloidal silver nanoparticles with high electrical conductivity and their potential application.

Published in	International Journal of Materials Science and Applications (Volume 4, Issue 5)
DOI	10.11648/j.ijmsa.20150405.17
Page(s)	325-332
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Sliver Nanoparticles, Synthesis, Electrical Conductivity, Electronic Circuits, Applications

References

[1]	G. Franci, A. Falanga, S. Galdiero, L. Palomba, M. Rai, G. Morelli, M. Galdiero, “Silver nanoparticles as potential antibacterial agents”, Molecules, vol.20, pp.8856-8874, 2015.
[2]	S. Jana, T. Pal, “Synthesis, characterization and catalytic application of silver nanoshell coated functionalized polystyrene beads”, J. Nanosci. Nanotechnol. vol.7, pp.2151-2156, 2007.
[3]	R. Stiufiuc, C. Iacovita, C. M. Lucaciu, G. Stiufiuc, A. G. Dutu, C. Braescu, N. Leopold, “SER-sactive silver colloids prepared by reduction of silver nitrate with short-chain polyethylene glycol”, Nanoscale Res. Lett. vol.8, pp.47, 2013.
[4]	M. P. Konrad, A. P. Doherty, S. E. J. Bell, “Stable and uniform SERS signals from self-assembled two-dimensional interfacial arrays of optically coupled Ag nanoparticles”, Anal. Chem. vol.85, pp.6783-6789, 2013.
[5]	G. M. Meheretu, D. Cialla, J. Popp, “Surface enhanced raman spectroscopy on silver nanoparticles”, Inter. J. Biochemistry Biophysics, vol.2, pp.63-67, 2014.
[6]	G. A. Evtugyn, R. V. Shamagsumova, P. V. Padnya, I. I. Stoikov, I. S. Antipin, “Cholinesterase sensor based on glassy carbon electrode modified with Ag nanoparticles decorated with macrocyclic ligands”, Talanta, vol.127, pp.9-17, 2014.
[7]	N. T. K. Thanha, L. A. W. Green, “Functionalisation of nanoparticles for biomedical applications”, Nano Today, vol.5, pp.213-230, 2010.
[8]	N. Alon, Y. Miroshnikov, N. Perkas, I. Nissan, A. Gedanken, O. Shefi, “Substrates coated with silver nanoparticles as a neuronal regenerative material”, Int. J. Nanomed. vol.9, pp.23-31, 2014.
[9]	Y. Bu, S. Lee, “Influence of dopamine concentration and surface coverage of Au shell on the optical properties of Au, Ag, and AgcoreAushell nanoparticles”, ACS Appl. Mater. Interfaces vol.4, pp. 3923-3931, 2012.
[10]	Y. Luo, L. Ma, X. Zhang, A. Liang, Z. Jiang, “SERS detection of dopamine using label-free acridine red as molecular probe in reduced graphene oxide/silver nanotriangle sol substrate”, Nanoscale Research Letters, vol.10, pp.230, 2015.
[11]	P. J. Rivero, A. Urrutia, J. Goicoechea, I. R. Matias, F. J. Arregui, “A Lossy Mode Resonance optical sensor using silver nanoparticles-loaded films for monitoring human breathing”, Sens. Actuators B, vol.187, pp.40-44, 2013.
[12]	S. Tsuruga, T. Abe, “Preparation of electro-conductive inkjet inks through silver halide photographic emulsion”, Proceedings of the Pan-Pacific Imaging Conference, pp.56-59, 2008.
[13]	S. Iwama, T. Sahashi, “Sintering of ultrafine metal powders. I. Coalescence growth stage of Au and Ag”, Japn. J. Appl. Phys. vol.19, pp.1039-1044, 1980.
[14]	I. Sondi, D. V. Goia, E. Matijevic, “Preparation of highly concentrated stable dispersions of monodispersed silver nanoparticles”, J. Colloid. Interface Sci. vol.260, pp. 75-81, 2003.
[15]	K. M. M. El-Nour, A. Eftaiha, A. Al-Reda, A. A. Ammar, “Synthesis and applications of silver nanoparticles”, Arabian J. Chem. vol.3, pp.135-140, 2010.
[16]	A. B. Smetana, K. J. Klabunde, C. M. Sorensen, “Synthesis of spherical silver nanoparticles by digestive ripening, stabilization with various agents, and their 3-D and 2-D superlattice formation”, J. Colloid. Interface Sci. vol.284, pp. 521-526, 2005.
[17]	D. Wakuda, K.S. Kim, K. Suganuma, “Room temperature sintering of Ag nanoparticles by drying solvent”, Scrip. Mater. vol.59, pp.649-652, 2008.
[18]	H. Lee, K. S. Chou, “Inkjet Printing of Nanosized Silver Colloids”, Nanotechnology, vol.16, pp.2436-2441, 2005.
[19]	Z. Anna, S. Ewa, Z. Adriana, G. Maria, H. Jan, “Preparation of silver nanoparticles with controlled particle size”, Procedia Chem. vol.1, pp.1560-1566, 2009.
[20]	S. Iravani, H. Korbekandi, S. V. Mirmohammadi, B. Zolfaghari, “Synthesis of silver nanoparticles: chemical, physical and biological methods”, Research in Pharmaceutical Sciences, vol.9, pp.385-406, 2014.
[21]	M. M. Kholoud, A. E. Nour, A. Eftaiha, A. A. Warthan, and R. A. A. Ammar, “Synthesis and applications of silver nanoparticles”, Arabian Journal of Chemistry, vol.3, pp.135-140, 2010.
[22]	K. Toisawa, Y. Hayashi, H. Takizawa, “Synthesis of highly concentrated Ag nanoparticles in a heterogeneous solid-liquid system under ultrasonic irradiation”, Materials Transactions, vol.51, pp.1764-1768, 2010.
[23]	A. lennon, R. Utama, A. Ho-Baillie, M. Lenio, N. Kuepper, S. Wenham, in: Proceedings of the NIP 23 and Digital Fabrication Conference, 2007.
[24]	A. lennon, R. Utama, A. Ho-Baillie, and S. Wenham, Proceedings of the NIP 24 and Digital Fabrication Conference, 2008.
[25]	S. Tsuruga, and T. Abe, “Preparation of electro-conductive inkjet inks through silver halide photographic emulsion”, Proceedings of the Pan-Pacific Imaging Conference, pp.56-59, 2008.
[26]	H. H. Lee, K. S. Chou, K. C. Huang, “Inkjet printing of nanosized silver colloids”, Nanotechnology vol.16, pp.2436-2441, 2005.
[27]	B. C. Gates, “Supported Metal Clusters: Synthesis, Structure, and Catalysis”, Chem. Rev. Vol.95, pp.511-522, 1995.
[28]	N. R. Jana, T. K. Sau, T. J. Pal, “Growing Small Silver Particles as Redox Catalyst”, J. Phys. Chem. B vol.103, pp.115-121, 1999.
[29]	A. S. Gurav, T. T. Kodas, L. M. Wang, E. I. Kauppinen, and J. Joutsensaari “Generation of nanometer-size fullerene particles via vapor condensation”, J. Joutsensaari Chem. Phys. Lett. vol.218, pp.304-308, 1994.
[30]	F. Kruis, H. Fissan, B. Rellinghaus, “Sintering and evaporation characteristics of gas-phase synthesis of size-selected PbS nanoparticles”, Mater. Sci. Eng. B vol.69-70, pp.329-334, 2000.
[31]	M. H. Magnusson, K. Deppert, J. O. Malm, J. O. Bovin, L. Samuelson, “Gold nanoparticles: Production, reshaping, and thermal charging”, J. Nanoparticle Res. vol.1, pp.243-251, 1999.
[32]	F. Mafune, J. Kohno, Y. Takeda, T. Kondow, H. Sawabe, “Formation and size control of silver nanoparticles by laser ablation in aqueous solution”, J. Phys. Chem. B, vol.104, pp.9111-9117, 2000.
[33]	I. Dolgaev, A. V. Simakin, V. V. Voronov, G. A. Shafeev, F. B. Verduraz, Nanoparticles producedby laser ablation of solids in liquid environments, Appl. Surf. Sci. vol.186, pp.546-551, 2002.
[34]	J. P. Sylvestre, A. V. Kabashin, E. Sacher, M. Meunier, J. H. T. Luong, “Stabilization and size control of gold nanoparticles during laser ablation in aqueous cyclodextrins”, J. Am. Chem. Soc. vol.126, pp.7176-7177, 2004.
[35]	T. Tsuji, K. Iryo, N. Watanabe, M. Tsuji, “Preparation of silver nanoparticles by laser ablation in solution: Influence of laser wavelength on particle size” Appl. Surf. Sci. vol.202, pp.80-85. 2002.
[36]	H. Huang, Y. Yang, “Preparation of silver nanoparticles in inorganic clay suspensions”, Compos. Sci. Technol. vol.68, pp.2948-2953, 2008.
[37]	A. R. Vilchis-Nestor, V. nchez-Mendieta, M. A. Camacho-Lo´pez, R. M. Go´mez-Espinosa, M. A. Camacho-Lo´pez, J. A. Arenas-Alatorre, “Solventless synthesis and optical properties of Au and Ag nanoparticles using Camellia sinensis extract”, Mater. Lett. vol.62, pp.3103-3105, 2008.
[38]	K. Kalishwaralal, V. Deepak, S. Ramkumarpandian, H. Nellaiah, and G. Sangiliyandi, “Extracellular biosynthesis of silver nanoparticles by the culture supernatant of Bacillus licheniformis”, Mater. Lett. vol. 62, pp.4411-4413, 2008.
[39]	S. F. Chen, H. Zhang, Adv. Nat. Sci.: Nanosci. Nanotechnol. “Aggregation kinetics of nanosilver in different water condition”, vol.3, pp.035006-1-7, 2012.
[40]	T. M. D. Dang, T. T. T. Le, E. F. Blance, M. C. Dang, “Influence of surfactant on the preparation of silver nanoparticles by polyol method”, Adv. Nat. Sci.: Nanosci. Nanotechnol. vol.3, pp.035004-1-4, 2012.
[41]	R. S. Patil, M. R. Kokate, C. Jambhale, S. M. Pawar, S. H. Han, S. S. Kolekar, “One-pot synthesis of PVA-capped silver nanoparticles their characterization and biomedical application”, Adv. Nat. Sci.: Nanosci. Nanotechnol. vol.3, pp.015013-1-7, 2012.
[42]	Q. H. Tran, V. Q. Nguyen, A. T. Le, “Silver nanoparticles: synthesis, properties, toxicology, applications and perspectives”, Adv. Nat. Sci. Nanosci. Nanotechnol. vol.4, pp.033001-1-19, 2013.
[43]	D. Radziuk, A. Skirtach, G. Sukhrukov, D. Shchukin, “Stabilization of silver nanoparticles by polyelectrolytes and poly (ethylene glycol)”, Macromol: Rapid. Commun. vol.28, pp.848-855, 2007.
[44]	C. Luo, Y. Zhang, X. Zeng, Y. Zeng, Y. Wang, “The role of poly(ethylene glycol) in the formation of silver nanoparticles”, J. Colloi. Interface Sci. vol. 288(2), pp.444-448, 2005.
[45]	S. L. C. Hsu, R. T. Wu, “Synthesis of contamination-free silver nanoparticle suspensions for micro-interconnects”, Mater. Lett. vol.61, pp.3719-3722, 2007.
[46]	M. Chen, Y. G. Feng, X. Wang, T. C. Li, J. Y. Zhang, D. J. Qian, “Silver nanoparticles capped by oleylamine: formation, growth, and self-organization”, Langmuir, vol.23, pp.5296-5304, 2007.
[47]	J. Natsuki, T. Abe, “Synthesis of pure colloidal silver nanoparticles with high electroconductivity for printed electronic circuits: The effect of amines on their formation in aqueous media”, J. Colloid. Interf. Sci. vol.359, pp.19-23, 2011.
[48]	J. Natsuki, T. Natsuki, T. Abe, “Low molecular weight compounds as effective dispersing agents in the formation of colloidal silver nanoparticles”, J. Nanopart. Res. vol.15, pp.1483-1-8, 2013.
[49]	J. Natsuki, T. Natsuki, “One-step synthesis of silver nanoparticles using low molecular weight compounds at room temperature”, Inter. J. Mater. Eng. Techno. vol.13, pp.109-119, 2015.
[50]	K. S. Chou, Y. S. Lai, “Effect of polyvinyl pyrrlidone molecular weights on the formation of nanosized siver colloids” Mater. Chem. Phys. vol.83, pp.82-88, 2004.
[51]	S. He, J. Yao, S. Xie, H. Gao, S. Pang, “Superlattices of silver nanoparticles passivated by mercaptan”, J. Phys. D. vol.34, pp.3425-3429, 2001.
[52]	M. Bosetti, A. Masse, E. Tobin, M. Cannas, “Silver coated materials for external fixation devices: in vitro biocompatibility and genotoxicity”, Biomaterials vol.23, pp.887-892, 2002.
[53]	P. Jain, T. Pradeep, “Potential of silver nanoparticle-coated polyurethane foam as an antibacterial water filter”, Biotechnol. Bioeng. vol.90, pp.59-63, 2005.
[54]	Q. Li, S. Mahendra, D. Y. Lyon, L. Brunet, M. V. Liga, D. Li, P. J. Alvarez, “Antimicrobial nanomaterials for water disinfection and microbial control: potential applications and implications”, Water Res. vol.42, pp.4591-4602, 2008.
[55]	M. Cho, H. Chung, W. Choi, J. Yoon, “Different inactivation behaviors of MS-2 phage and Escherichia coli in TiO2 photocatalytic disinfection”, Appl. Environ. Microbiol. vol.71, pp.270-275, 2005.
[56]	S. Y. Yeo, H. J. Lee, S. H. Jeong, “Preparation of nano-composite fibers for permanent antibacterial effect”, J. Mater. Sci. vol.38, pp.2143-2147, 2013.
[57]	N. Duran, P. D. Marcarto, G. H. D. Souza, O. L. Alves, E. Esposito, “Antibacterial effect of silver nanoparticles produced by dungal process on textile fabrics and their effluent treatment”, J Biomed Nanotechnol vol.3, pp.203-208, 2007.
[58]	J. Z. Guo, H. Cui, W. Zhou, W. Wang, “Ag nanoparticle-catalyzed chemiluminescent reaction between luminol and hydrogen peroxide”, J. Photochem. Photobiol. A: Chem. vol.193, pp.89-96, 2008.

Cite This Article

Plain Text BibTeX RIS

APA Style

Jun Natsuki, Toshiaki Natsuki, Yoshio Hashimoto. (2015). A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. International Journal of Materials Science and Applications, 4(5), 325-332. https://doi.org/10.11648/j.ijmsa.20150405.17

Copy | Download

ACS Style

Jun Natsuki; Toshiaki Natsuki; Yoshio Hashimoto. A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. Int. J. Mater. Sci. Appl. 2015, 4(5), 325-332. doi: 10.11648/j.ijmsa.20150405.17

Copy | Download

AMA Style

Jun Natsuki, Toshiaki Natsuki, Yoshio Hashimoto. A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. Int J Mater Sci Appl. 2015;4(5):325-332. doi: 10.11648/j.ijmsa.20150405.17

Copy | Download

@article{10.11648/j.ijmsa.20150405.17,
  author = {Jun Natsuki and Toshiaki Natsuki and Yoshio Hashimoto},
  title = {A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {5},
  pages = {325-332},
  doi = {10.11648/j.ijmsa.20150405.17},
  url = {https://doi.org/10.11648/j.ijmsa.20150405.17},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150405.17},
  abstract = {In recent years, nanoparticles of noble metals such as gold, silver and palladium have drawn immense attention due to the wide range of new applications in various fields of industry. Particularly, silver nanoparticles have significant interest in medical applications such as very effective antibacterial agents without the toxic effects, and industry application such as inkjet inks containing well uniform dispersions of nano-sized silver particles that are useful for producing electronic circuits. It is important that the silver nanoparticles require not only the particles to be of nano-size, but also synthesis of the nanoparticles to be produced easily and at low cost. Over the past few decades, many synthetic methods of silver nanoparticles have been studied. This paper aims to review different synthesis routes of silver nanoparticles and their applications. In particular, we mainly present several chemical approaches to preparing silver nanoparticles and their properties as well as applications based on our recent studies. The focus is on effective and efficient synthesis of pure colloidal silver nanoparticles with high electrical conductivity and their potential application.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications
AU  - Jun Natsuki
AU  - Toshiaki Natsuki
AU  - Yoshio Hashimoto
Y1  - 2015/09/29
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150405.17
DO  - 10.11648/j.ijmsa.20150405.17
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 325
EP  - 332
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150405.17
AB  - In recent years, nanoparticles of noble metals such as gold, silver and palladium have drawn immense attention due to the wide range of new applications in various fields of industry. Particularly, silver nanoparticles have significant interest in medical applications such as very effective antibacterial agents without the toxic effects, and industry application such as inkjet inks containing well uniform dispersions of nano-sized silver particles that are useful for producing electronic circuits. It is important that the silver nanoparticles require not only the particles to be of nano-size, but also synthesis of the nanoparticles to be produced easily and at low cost. Over the past few decades, many synthetic methods of silver nanoparticles have been studied. This paper aims to review different synthesis routes of silver nanoparticles and their applications. In particular, we mainly present several chemical approaches to preparing silver nanoparticles and their properties as well as applications based on our recent studies. The focus is on effective and efficient synthesis of pure colloidal silver nanoparticles with high electrical conductivity and their potential application.
VL  - 4
IS  - 5
ER  -

Copy | Download

Author Information

Jun Natsuki

Institute of Carbon Science and Technology, Shinshu University, Wakasato, Nagano-shi, Nagano, Japan
Toshiaki Natsuki

Institute of Carbon Science and Technology, Shinshu University, Wakasato, Nagano-shi, Nagano, Japan; Faculty of Textile Science and Technology, Shinshu University, Tokida, Ueda-shi, Nagano, Japan
Yoshio Hashimoto

Institute of Carbon Science and Technology, Shinshu University, Wakasato, Nagano-shi, Nagano, Japan; Faculty of Engineering, Shinshu University, Wakasato, Nagano, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Jun Natsuki, Toshiaki Natsuki, Yoshio Hashimoto. (2015). A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. International Journal of Materials Science and Applications, 4(5), 325-332. https://doi.org/10.11648/j.ijmsa.20150405.17

Copy | Download

ACS Style

Jun Natsuki; Toshiaki Natsuki; Yoshio Hashimoto. A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. Int. J. Mater. Sci. Appl. 2015, 4(5), 325-332. doi: 10.11648/j.ijmsa.20150405.17

Copy | Download

AMA Style

Jun Natsuki, Toshiaki Natsuki, Yoshio Hashimoto. A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications. Int J Mater Sci Appl. 2015;4(5):325-332. doi: 10.11648/j.ijmsa.20150405.17

Copy | Download

@article{10.11648/j.ijmsa.20150405.17,
  author = {Jun Natsuki and Toshiaki Natsuki and Yoshio Hashimoto},
  title = {A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {5},
  pages = {325-332},
  doi = {10.11648/j.ijmsa.20150405.17},
  url = {https://doi.org/10.11648/j.ijmsa.20150405.17},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150405.17},
  abstract = {In recent years, nanoparticles of noble metals such as gold, silver and palladium have drawn immense attention due to the wide range of new applications in various fields of industry. Particularly, silver nanoparticles have significant interest in medical applications such as very effective antibacterial agents without the toxic effects, and industry application such as inkjet inks containing well uniform dispersions of nano-sized silver particles that are useful for producing electronic circuits. It is important that the silver nanoparticles require not only the particles to be of nano-size, but also synthesis of the nanoparticles to be produced easily and at low cost. Over the past few decades, many synthetic methods of silver nanoparticles have been studied. This paper aims to review different synthesis routes of silver nanoparticles and their applications. In particular, we mainly present several chemical approaches to preparing silver nanoparticles and their properties as well as applications based on our recent studies. The focus is on effective and efficient synthesis of pure colloidal silver nanoparticles with high electrical conductivity and their potential application.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Review of Silver Nanoparticles: Synthesis Methods, Properties and Applications
AU  - Jun Natsuki
AU  - Toshiaki Natsuki
AU  - Yoshio Hashimoto
Y1  - 2015/09/29
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150405.17
DO  - 10.11648/j.ijmsa.20150405.17
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 325
EP  - 332
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150405.17
AB  - In recent years, nanoparticles of noble metals such as gold, silver and palladium have drawn immense attention due to the wide range of new applications in various fields of industry. Particularly, silver nanoparticles have significant interest in medical applications such as very effective antibacterial agents without the toxic effects, and industry application such as inkjet inks containing well uniform dispersions of nano-sized silver particles that are useful for producing electronic circuits. It is important that the silver nanoparticles require not only the particles to be of nano-size, but also synthesis of the nanoparticles to be produced easily and at low cost. Over the past few decades, many synthetic methods of silver nanoparticles have been studied. This paper aims to review different synthesis routes of silver nanoparticles and their applications. In particular, we mainly present several chemical approaches to preparing silver nanoparticles and their properties as well as applications based on our recent studies. The focus is on effective and efficient synthesis of pure colloidal silver nanoparticles with high electrical conductivity and their potential application.
VL  - 4
IS  - 5
ER  -

Copy | Download