International Journal of Materials Science and Applications

| Peer-Reviewed |

Zn-Ni Electrodeposition for Enhanced Corrosion Performance

Received: 04 December 2013    Accepted:     Published: 30 December 2013
Views:       Downloads:

Share This Article

Abstract

Zinc-Nickel (Zn-Ni) electrodeposition has been carried out using direct current. Cathode current efficiency and deposit thickness were determined by weight measurement method. Influence of current density on the deposition process was also investigated. The morphologies of the deposits were studied using Scanning Electron Microscope and Field Emission Gun Scanning Electron Microscopes. Effect of temperature on the Ni content and morphologies of the deposits was also studied. Energy dispersive spectroscopy (EDX) was utilised to analyse the elemental composition of the deposits. It was found that temperature changes in the bath had a marked influence on the Ni content and morphology of the deposits. Deposit surface profile revealed non-uniform distribution of Ni in the deposits. Anomalous deposition behaviour was exhibited by the baths and Ni content of 10-15wt% for best corrosion performance was obtained between 60-75 g/l of NiCl2.6H2O. Normal deposition took place at current densities lower than 2A/dm2. Deposits with 12wt% Ni exhibited best corrosion performance.

DOI 10.11648/j.ijmsa.20130206.18
Published in International Journal of Materials Science and Applications (Volume 2, Issue 6, November 2013)
Page(s) 221-227
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Zn-Ni Alloy, Electrodeposition, Current density, Corrosion resistance, Morphology

References
[1] M.F. Mathias and T.W. Chapman, J. Electrochem. Soc., Vol. 137 (1990) 102.
[2] T.V.Byk,T.V.Gaevskaya,L.S.Tsybulskaya,Surf. Coat. Technol., Vol. 202 (2008) 5817.
[3] L.S.Tsybulskaya,T.V.Gaevskaya,O.G. Purovskaya,T.V.Byk, Surf. Coat. Technol., Vol. 203 (2008) 234.
[4] A. Maciej, G. Nawrat, W. Simka, J. Piotrowski, Materials Chemistry and Physics, Vol. 132 (2012) 1095.
[5] S.H. Mosavat, M.H. Shariat, M.E. Bahrololoom, Corr. Sci., Vol. 59 (2012) 81
[6] K.R. Sriraman, S. Brahimi, J.A, Szpunar, J.H. Osborne, S. Yue, Electrochimica Acta, Vol. 103 (2013) 314
[7] N. Eliaz, K. Venkatakrishna, A. Chitharanjan Hegde, Surf. Coat. Technol., Vol. 205 (2010) 1969
[8] A. Chitharanjan Hegde, K. Venkatakrishna, N. Eliaz, Surf. Coat. Technol., Vol. 205 (2010) 2031
[9] K.R. Sriraman, H.W. Strauss, S. Brahimi, R.R. Chromik, J.A. Szpunar, J.H. Osborne, S. Yue, Tribology International, Vol. 56 (2012) 107
[10] M. Benballa, L. Nils, M. Sarret, C. Muller, Surf. Coat. Technol., Vol. 123 (2000) 55
[11] M. Gavrila, J.P. Millet, H. Mazille, D. Marchandise, J.M. Cuntz, Surf. Coat. Technol., Vol. 123 (2000) 164.
[12] G. Roventi, R. Fratesi, R.A. Della Guardia and G. Barucca, J. Appl. Electrochem., Vol. 30 (2000) 173.
[13] A. Conde, M.A. Arenas, J.J. De Damborenea, Corr. Sci., Vol. 53 (2011) 1489
[14] A. Abibsi, J.K Dennis and N.R Short, Trans. Inst. Met. Finish., Vol. 69 (1991) 145
[15] A. Brenner, "Electrodeposition of Alloys" vol. I and II, Academic press, New York and London (1963)
[16] J.B Bajat, M.D. Maksimovic, V.B. Miskovic-Stankovic, S. Zec, J. Appl. Electrochem., Vol. 31 (2001) 355
[17] S.S Abd El Rehim, E.E Fouad, S.M.A. El Wahab and H.H Hassan, Electrochim. Acta, Vol. 41 (1996) 1413
[18] F.J. Fabri Miranda; O.E Barica, O.R. Mattos and R. Wiart, J. Electrochem. Soc., Vol. 144 (1997) 3441
[19] E. Chassaing and R.Wiart, Electrochim. Acta, Vol. 37 (1992) 545
[20] R. Fratesi, G. Roventi, J. Appl. Electrochem., Vol. 22 (1992) 657
[21] M. Simmons, Ph.D Thesis, Loughborough University, 2001.
[22] H. Ashassi-Sorkhabi, A. Hagrah, N. Parvini-Ahmadi, J. Manzoori, Surf. Coat. Technol., Vol. 140 (2001) 278
[23] H. Young Lee, S. Gyu Kim, Surf. Coat. Technol.,Vol. 135 (2000) 69
[24] H. Dahms and I.M Croll. J. Electrochem. Soc., Vol. 112 (1965) 771
[25] X. Qiao, H. Li, W. Zhao, D. Li, Electrochimica Acta, Vol. 89 (2013) 771
[26] S. Rajendran, S. Bharathi, T. Vasudevan, Trans. Inst. Met. Finish.; Vol. 78 (2000) 129
[27] A.M Alfantazi, J. Page, U.Erb, J. Appl. Electrochem., Vol. 26 (1996) 1225
[28] R. Ramanauskas, P. Quintana, L. Maldonado, R. Pomes, M.A. Pech-Canul, Surf. Coat. Technol., Vol. 92 (1997) 16
[29] A.M Alfantazi, G. Brehaut, U.Erb, Surf. Coat. Technol., Vol. 89 (1997) 239
[30] A.M Alfantazi, A.M El-sherik, U.Erb, Scripta Metallurgica et Materialia, Vol. 30 (1994) 1245
[31] H. Park and J.A Szpunar, Corr.sci., Vol. 40, (1998) 525
Author Information
  • Department of Mechanical/Marine Engineering, Niger Delta University, Wilberforce Island, Amassoma, Bayelsa State, Nigeria

  • Department of Chemical/Petroleum Engineering, Niger Delta University, Wilberforce Island, Amassoma, Bayelsa State, Nigeria

Cite This Article
  • APA Style

    Tolumoye Johnnie Tuaweri, Rhoda Gumus. (2013). Zn-Ni Electrodeposition for Enhanced Corrosion Performance. International Journal of Materials Science and Applications, 2(6), 221-227. https://doi.org/10.11648/j.ijmsa.20130206.18

    Copy | Download

    ACS Style

    Tolumoye Johnnie Tuaweri; Rhoda Gumus. Zn-Ni Electrodeposition for Enhanced Corrosion Performance. Int. J. Mater. Sci. Appl. 2013, 2(6), 221-227. doi: 10.11648/j.ijmsa.20130206.18

    Copy | Download

    AMA Style

    Tolumoye Johnnie Tuaweri, Rhoda Gumus. Zn-Ni Electrodeposition for Enhanced Corrosion Performance. Int J Mater Sci Appl. 2013;2(6):221-227. doi: 10.11648/j.ijmsa.20130206.18

    Copy | Download

  • @article{10.11648/j.ijmsa.20130206.18,
      author = {Tolumoye Johnnie Tuaweri and Rhoda Gumus},
      title = {Zn-Ni Electrodeposition for Enhanced Corrosion Performance},
      journal = {International Journal of Materials Science and Applications},
      volume = {2},
      number = {6},
      pages = {221-227},
      doi = {10.11648/j.ijmsa.20130206.18},
      url = {https://doi.org/10.11648/j.ijmsa.20130206.18},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmsa.20130206.18},
      abstract = {Zinc-Nickel (Zn-Ni) electrodeposition has been carried out using direct current. Cathode current efficiency and deposit thickness were determined by weight measurement method. Influence of current density on the deposition process was also investigated. The morphologies of the deposits were studied using Scanning Electron Microscope and Field Emission Gun Scanning Electron Microscopes. Effect of temperature on the Ni content and morphologies of the deposits was also studied. Energy dispersive spectroscopy (EDX) was utilised to analyse the elemental composition of the deposits. It was found that temperature changes in the bath had a marked influence on the Ni content and morphology of the deposits. Deposit surface profile revealed non-uniform distribution of Ni in the deposits. Anomalous deposition behaviour was exhibited by the baths and Ni content of 10-15wt% for best corrosion performance was obtained between 60-75 g/l of NiCl2.6H2O. Normal deposition took place at current densities lower than 2A/dm2. Deposits with 12wt% Ni exhibited best corrosion performance.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Zn-Ni Electrodeposition for Enhanced Corrosion Performance
    AU  - Tolumoye Johnnie Tuaweri
    AU  - Rhoda Gumus
    Y1  - 2013/12/30
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ijmsa.20130206.18
    DO  - 10.11648/j.ijmsa.20130206.18
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 221
    EP  - 227
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20130206.18
    AB  - Zinc-Nickel (Zn-Ni) electrodeposition has been carried out using direct current. Cathode current efficiency and deposit thickness were determined by weight measurement method. Influence of current density on the deposition process was also investigated. The morphologies of the deposits were studied using Scanning Electron Microscope and Field Emission Gun Scanning Electron Microscopes. Effect of temperature on the Ni content and morphologies of the deposits was also studied. Energy dispersive spectroscopy (EDX) was utilised to analyse the elemental composition of the deposits. It was found that temperature changes in the bath had a marked influence on the Ni content and morphology of the deposits. Deposit surface profile revealed non-uniform distribution of Ni in the deposits. Anomalous deposition behaviour was exhibited by the baths and Ni content of 10-15wt% for best corrosion performance was obtained between 60-75 g/l of NiCl2.6H2O. Normal deposition took place at current densities lower than 2A/dm2. Deposits with 12wt% Ni exhibited best corrosion performance.
    VL  - 2
    IS  - 6
    ER  - 

    Copy | Download

  • Sections