Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint

Anwar SNR; Crocombe AD

doi:doi:10.11648/j.ijmsa.20130206.16

| Peer-Reviewed

Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint

Anwar SNR, Crocombe AD

Published in International Journal of Materials Science and Applications (Volume 2, Issue 6)

Received: 19 September 2013 Accepted: Published: 10 December 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.

Published in	International Journal of Materials Science and Applications (Volume 2, Issue 6)
DOI	10.11648/j.ijmsa.20130206.16
Page(s)	204-208
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Adhesive Joint, Environment, Creep, Swelling, Damage

References

[1]	Crank, J., 1975, "The Mathematic of Diffusion", 2nd edition, Oxford University Press, London
[2]	Loh, WK., Crocombe, AD., Wahab, MA., Watts, JF, Ashcroft, IA., "The Effect of Moisture On The Failure Locus And Fracture Energy Of An Epoxy-Steel Interface", Journal of Adhesion Science Technology, Vol.16 (11) : 1407-1429, 2002
[3]	Liljedahl, CDM, Crocombe, AD., Wahab, MA., Ashcroft, IA., 2007, "Modelling The Environmental Degradation of Adhesively Bonded Aluminium And Composite Joints Using A CZM Approach", Elsevier International Journal of Adhesion & Adhesives
[4]	Mubashar, A., Aschroft, IA., Critchlow, GW., Crocombe, AD., 2009b, "Moisture AbsorptionDesorption Effects in Adhesive Joints", International Journals Adhesion and Adhesive 29 pp. 751-760
[5]	Frigione M., Lettieri M., "Procedures Conditioning the Absorption/Desorption Behaviour of Cold-Cured Epoxy Resins", Journal of Polymet Science Vol. 46, p.1320-1336, 2008
[6]	[6] McConnel BK., Pethrick RA., "Dielectric Studies of Water Absorption and Desorption in Epoxy Resins : Influence of Cure Process on Behaviour", Polymer International Journal, Vol. 57, p. 689-699, 2008
[7]	Kim & Brontman, 1971, 4th International Conference of Deformation, "Yield and Fracture of Polymers", Cambridge
[8]	Gilliat O., Broutman LJ., ASTM STP No. 685, p.61-83, 1978
[9]	Neumann S., Marom G., "Free-Volume Dependent Moisture Diffusion Under Stress in Composite Materials", Journal of Materials Science, Vol. 21, p. 26-30, 1986
[10]	Kasturiarachchi KA and Pritchard G., " Water Absorption of Glass/Epoxy Laminates Under Bending Stresses", Journals of Composites Vol. 14, p. 244-250, 1983
[11]	Knox, E.M. and Cowling, M.J., "A Rapid Durability Test Method for Adhesives", International Journal of Adhesion & Adhesives. Vol. 20, p. 201-208, 2000.
[12]	Roy S., Vengadassalam K., Wang Y, Park S and Liechti K.M., "Characterization and Modeling of Strain Assisted Diffusion in An Epoxy Adhesive Layer ",International Journal of Solids and Structures, Vol. 43, p. 27-52, 2006
[13]	Jurf & Vinson, 1985, Journal of Material Science, 20, 2979-2989
[14]	Cabanelas, J.C., Prolongo S.G., Serrano B., Bravo J., Baselga, 2003, Journal of material processing technology, In press
[15]	Adhesivestoolkit.com, Granta Park, Great Abington, Cambridge, 2010

Cite This Article

Plain Text BibTeX RIS

APA Style

Anwar SNR, Crocombe AD. (2013). Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. International Journal of Materials Science and Applications, 2(6), 204-208. https://doi.org/10.11648/j.ijmsa.20130206.16

Copy | Download

ACS Style

Anwar SNR; Crocombe AD. Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. Int. J. Mater. Sci. Appl. 2013, 2(6), 204-208. doi: 10.11648/j.ijmsa.20130206.16

Copy | Download

AMA Style

Anwar SNR, Crocombe AD. Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. Int J Mater Sci Appl. 2013;2(6):204-208. doi: 10.11648/j.ijmsa.20130206.16

Copy | Download

@article{10.11648/j.ijmsa.20130206.16,
  author = {Anwar SNR and Crocombe AD},
  title = {Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint},
  journal = {International Journal of Materials Science and Applications},
  volume = {2},
  number = {6},
  pages = {204-208},
  doi = {10.11648/j.ijmsa.20130206.16},
  url = {https://doi.org/10.11648/j.ijmsa.20130206.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20130206.16},
  abstract = {Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint
AU  - Anwar SNR
AU  - Crocombe AD
Y1  - 2013/12/10
PY  - 2013
N1  - https://doi.org/10.11648/j.ijmsa.20130206.16
DO  - 10.11648/j.ijmsa.20130206.16
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 204
EP  - 208
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20130206.16
AB  - Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.
VL  - 2
IS  - 6
ER  -

Copy | Download

Author Information

Anwar SNR

University of Mataram, NTB, Indonesia; University of Surrey, Guildford, GU2 7XH, UK; Ministry of Higher Education of Indonesia (DIKTI)
Crocombe AD

University of Surrey, Guildford, GU2 7XH, UK

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Anwar SNR, Crocombe AD. (2013). Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. International Journal of Materials Science and Applications, 2(6), 204-208. https://doi.org/10.11648/j.ijmsa.20130206.16

Copy | Download

ACS Style

Anwar SNR; Crocombe AD. Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. Int. J. Mater. Sci. Appl. 2013, 2(6), 204-208. doi: 10.11648/j.ijmsa.20130206.16

Copy | Download

AMA Style

Anwar SNR, Crocombe AD. Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint. Int J Mater Sci Appl. 2013;2(6):204-208. doi: 10.11648/j.ijmsa.20130206.16

Copy | Download

@article{10.11648/j.ijmsa.20130206.16,
  author = {Anwar SNR and Crocombe AD},
  title = {Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint},
  journal = {International Journal of Materials Science and Applications},
  volume = {2},
  number = {6},
  pages = {204-208},
  doi = {10.11648/j.ijmsa.20130206.16},
  url = {https://doi.org/10.11648/j.ijmsa.20130206.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20130206.16},
  abstract = {Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint
AU  - Anwar SNR
AU  - Crocombe AD
Y1  - 2013/12/10
PY  - 2013
N1  - https://doi.org/10.11648/j.ijmsa.20130206.16
DO  - 10.11648/j.ijmsa.20130206.16
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 204
EP  - 208
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20130206.16
AB  - Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.
VL  - 2
IS  - 6
ER  -

Copy | Download