International Journal of Materials Science and Applications

Editorial Board Members (132)
  • Prof. Weiwei Dong, PhD
    College of Mechanical Engineering, Donghua University, Shanghai, China
  • Dr. Yongchun Xiao
    College of Materials Science and Engineering, Hunan University, Changsha, China
  • Assoc. Prof. Likai Yang, PhD
    State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China
  • Dr. Rashi Gusain
    Department of Applied Sciences, Northumbria University, Newcastle Upon Tyne, United Kingdom
  • Dr. Mrinal Hota
    Materials Research Lab, University of Illinois Urbana-Champaign, Urbana, United States
  • Dr. Gaurav Pande
    Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, United States
  • Prof. Anita Ptiček Siročić, PhD
    Faculty of Geochemical Engineering, University of Zagreb, Varaždin, Croatia
  • Prof. Guoliang Qin, PhD
    School of Materials Science and Engineering, Shandong University, Ji’nan, China
  • Yiqi Fang
    Xi'an Institute of Electronic Engineering, China North Industries Group Corporation Limited, Xi'an, China
  • Dr. Swetarekha Ram
    Department of Physics, Indo-Korea Science and Technology Center, Bangalore, India
  • Dr. Sen Wang
    School of Chemistry and Physics, Queensland University of Technology, Brisbane, Australia
  • Assoc. Prof. R Vara Prasad Kaviti, PhD
    Department of Mechanical Engineering, Brindavan College of Engineering, Bangalore, India
  • Dr. Badis Rahal
    Department of Materials Physics, Algiers Nuclear Research Center, Algiers, Algeria
  • Dr. Jiantao Wang
    KAUST Solar Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
  • Dr. Monika Poonia
    Department of Chemistry and Biochemistry, The Ohio State University, Columbus, United States
  • Dr. Parvaneh Esmaeilnejad-Ahranjani
    Department for Materials Synthesis, Jožef Stefan Institute, Ljubljana, Slovenia
  • Assoc. Prof. Vijayalakshmi Sanyal, PhD
    PG And Research Department Of Physics, Thiru. A. Govindasamy Government Arts College, Tindivanam, India
  • Assoc. Prof. P Baraneedharan, PhD
    Centre of Excellence in Photonics and Nanotechnology Research, Saveetha Engineering College, Chennai, India
  • Assoc. Prof. Vijayalaxmi Sonkamble, PhD
    Department of Mechanical Engineering, Jawaharlal Nehru Engineering College, MGM University Aurangabad, Aurangabad, India
  • Assoc. Prof. Slavko Kralj, PhD
    Jožef Stefan Institute, Ljubljana, Slovenia
  • Assoc. Prof. Thanuj Kumar M, PhD
    Department of Robotics and Automation, Rajarajeswari College of Engineering, Bengaluru, India
  • Assoc. Prof. Xiaofang Zhao, PhD
    School of Mathematics, Statistics and Mechanics, Beijing University of Technology, Beijing, China
  • Prof. Ravindranadh Koutavarapu, PhD
    Department of Basic Sciences and Humanities, GMR Institute of Technology, GMR Nagar, Rajam, Vizianagaram-532127, India
  • Dr. José Ferreira
    Department of Materials Science and Engineering, Iowa State University, Ames, United States
  • Prof. Sivarama Krishnaiah, PhD
    Department of Mechanical Engineering, SVR Engineering College, Nandyal, India
  • Prof. Takashi Matsuoka, PhD
    New Industry Creation Hatchery Center, Tohoku University, Sendai, Japan
  • Assoc. Prof. Jing Wang, PhD
    Harbin University of Commerce, Harbin, China
  • Zhong Wang
    NanoTech Institute, University of Texas at Dallas, Richardson, United States
  • Zhiyuan Wei
    School of Materials Science and Engineering, Xi’an Jiaotong University, Xi’an, China
  • Dr. Dhanasekaran Thangavelu
    College of Materials Sciences and Chemical Engineering, Harbin Engineering University, Harbin, China
  • Nutakki Krishna Mohan
    Department of Physics, V.S.R. Government Degree and P.G. College, Machilipatanam, India
  • Assist. Prof. Noor Irinah Omar, PhD
    Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Malacca, Malaysia

    Lead Guest Editor of the special issue Science and Engineering of Coating

  • Assist. Prof. Amit Kumar, PhD
    Department of Atomic Energy, Homi Bhabha National Institute, Mumbai, India
  • Shailesh Narain Sharma
    Department of Advanced Materials and Devices, Council for Scientific and Industrial Research-National Physical Laboratory of India, New Delhi, India
  • Dr. Bicheng Zhu
    China University of Geosciences, Wuhan, China
  • Sathish Kumar Palaniappan
    Natural Composites Research Laboratory, Department of Materials and Production Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand
  • Alexandre Maitre
    Laboratory of Science of Ceramic Processes and Surface Treatments (SPCTS – UMR CNRS 7315), University of Limoges, Limoges, France
  • Mohanbabu A
    Department of Electronics and Communication, SRM University, Ramapauram, India
  • Prakash Kodali
    Department of Electronics and Communication Engineering, National Institute of Technology, Warangal, India
  • Prof. Peter Rusinov, PhD
    Department of Control Systems, Materials and Technologies in Mechanical Engineering, Institute of Mechanics, Robotics, Engineering of Transport and Technical Systems, Krasnodar, Russian Federation
  • Dr. Zheng Wei Li
    State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Haerbin, China
  • Dr. Lushi Kong
    State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, CNPC Tubular Goods Research Institute, Xi'an, China
  • Shaohua Li
    College of New Energy, China University of Petroleum (East China), Dongying, China
  • Sylwia Olenska
    Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences, Warsaw, Poland
  • Md Dilwar Alam Khan
    Department of Chemistry, Srikishan Sarda College, Hailakandi, India
  • Infanta Diana Michael
    Department of Physics, Bharathiar University, Coimbatore, India
  • Muhanna Al-Muhanna
    Advanced Manufacturing Technologies Institute, Industry and Energy Sector, King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
  • Durga Prasad
    Advanced Materials and Characterization Research Group, Research and Development, TATA Steel Ltd, Jamshedpur, India
  • Assist. Prof. Mustafa Engin Kocadağistan, PhD
    Department of Metallurgy and Materials Engineering, Ataturk University, Erzurum, Turkey
  • Madhu P
    Department of Mechanical Engineering, Malnad College of Engineering, Hassan, India
  • Assoc. Prof. Nürettin Akçakale
    Department of Textile, Clothing, Footwear and Leather, Bolu Abant Izzet Baysal University, Bolu, Turkey
  • Bin Zhang
    School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou, China
  • Dr. Preeti Gupta
    Institute of Integrative Nanoscience, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
  • Melike Dizbay-Onat
    Department of Mechanical Engineering, University of South Alabama, Mobile, United States
  • Sai Prasad Nayak
    Department of Chemistry, Dayananda Sagar University, Bangalore, India
  • Muhammad Asif Nawaz
    Department of Inorganic Chemistry and Materials Sciences Institute, University of Seville, Seville, Spain
  • Todorka Vladkova
    Department of Polymer Engineering, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
  • Reham Shabara
    Department of Physics, Collage of Sciences, Taibah University, Almadinah-Almunawara, Saudi Arabia
  • Iryna Galstian
    Department of Electronic Structure and Electronic Properties, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
  • Assoc. Prof. King Jye Wong, PhD
    Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia
  • Jixing Cao
    Department of Civil and Environmental Engineering, National University of Singapore, Singapore
  • Manujesh B J
    Department of Mechanical Engineering, Vivekananda College of Engineering and Technology Puttur, Puttur, India
  • Evando Araújo
    Department of Materials Science, Federal University of the São Francisco Valley, Pernambuco, Brazil
  • Mao Fu
    College of Geography and Environmental Science, Guizhou Normal University, Guizhou, China
  • Assoc. Prof. Rostand Tayong Boumda
    School of Computer Science and Technology, University of Bedfordshire, Luton, United Kingdom
  • Ion Valentin
    Innovation Center in Photonics and Plasma for Advanced Materials and Technologies Fotoplasmat, National Institute for Laser, Plasma and Radiation physics, Magurele, Romania
  • Dr. Haroune Rachid Ben Zine
    Department of Thin-Film Physics, Institute of Technical Physics and Materials Science, Budapest, Hungary
  • Dr. Wang Haoying
    Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China
  • Assoc. Prof. Yong Gao, PhD
    Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, China
  • Prof. Saim Ates, PhD
    Forest Industrial Engineering, Kastamonu University, Kastamonu, Turkey
  • Balaga Viswanadham
    GMR Institute of Technology, Rajam, India
  • Dr. Wenyou Zhang
    Department of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin, Ireland
  • Dr. Pietro Mazzuca
    Department of Civil Engineering, University of Calabria, Rende, Italy
  • Prof. Jian Peng, PhD
    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China
  • Assoc. Prof. Ashok Atulkar, PhD
    Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore, India
  • Dr. Rupesh Kandel
    Department of Bionanotechnology and Bionanoconvergence Engineering, Jeonbuk National University, Jeonju, South Korea
  • Dr. Xingyi Shi
    Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong
  • Prof. Aydin Şik, PhD
    Department of Industrial Design, Gazi University, Ankara, Turkey
  • Prof. Atilla Evcin, PhD
    Department of Materials Science and Engineering, Afyon Kocatepe University, Afyonkarahisar, Turkey
  • Dr. Krishna Chaitanya Pitike
    Nuclear Sciences Division, Pacific Northwest National Laboratory, Richland, United States
  • Dr. Muhammad Sajid Khan
    Department of Mechanical Engineering, Institute of Innovation Research of Shengzhou, Zhejiang University of Technology, Shengzhou, China
  • Assoc. Prof. Jian Zhao, PhD
    College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan, China
  • Dr. Chengcheng Fan
    School of Infrastructure Engineering, Dalian University of Technology, Dalian, China
  • Dr. Murtuja Husain
    Department of Materials Engineering, Council of Scientific and Industrial Research-National Metallurgical Laboratory, Jamshedpur, India
  • Dr. Vinit Sharma
    Shoolini Lifesciences Pvt. Ltd., Shoolini University, Solan, India
  • Dr. Manikandan Maruthappan
    Department of Physics and Materials Sciences, Chiang Mai University, Chiang Mai, Thailand
  • Assoc. Prof. Xianmou Fan, PhD
    Department of Plastic Surgery, Guangdong Provincial Key Laboratory of Autophagy and Major Chronic Non-communicable Diseases, Zhanjang, China
  • Dr. Ipfi Mathoho
    Department of Manufacturing, Council for Scientific and Industrial Research, Pretoria, South Africa
  • Assoc. Prof. Fatih Mehmet Coşkun, PhD
    Department of Physics Engineering, Istanbul Medeniyet University, Istanbul, Turkey
  • Prof. Dheerendra Singh Yadav, PhD
    Department of Physics, Chaudhary Charan Singh Post Graduate College, Etawah, India
  • Sujoy Sarkar
    Department of Chemistry, Vellore Institute of Technology, Chennai, India
  • Assoc. Prof. Yihang Li, PhD
    Academy of Advanced Interdisciplinary Research, Xidian University, Xi’an, China
  • Weili Dai
    College of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang, China
  • Cong Li
    School of Energy and Power Engineering, Changsha University of Science and Technology, Changsha, China
  • Pulkit Garg
    Department of Materials Science and Engineering, University of California, Irvine, United States
  • Mohammad Qasim Shaikh
    Department of Research and Application Development, Solvay Materials Global Business Unit, Alpharetta, United States
  • Abdulkadir Sanli
    Department of Mechatronics Engineering, Turkish-German University, Istanbul, Turkey
  • Preeti Verma
    Division of Analytical and Metal, National Research Laboratory for Conservation of Cultural Property, Lucknow, India
  • Prof. Jasbeer singh Sidhu
    Department of Mechanical Engineering, MGMs College of Engineering, Affiliated to Dr. Babasaheb Ambedkar Technological University, Nanded, India
  • Dawid Kozień
    Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
  • Jayakumar Thangaraj
    Department of Mechanical Engineering, Academy of Maritime Education and Training, Chennai, India
  • Selvin Yesilay
    Department of Glass, Anadolu University, Eskişehir, Turkey
  • Maria Betânia de Freitas-Marques
    Department of Chemistry, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
  • Assoc. Prof. Zhiping Xiong
    School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, China
  • Jin-Shui Yang
    Qingdao Innovation and Development Base, Harbin Engineering University, Qingdao, China
  • Mallikarjuna Reddy Kesama
    Department of Physics, Sungkyunkwan University, Suwon-si, South Korea
  • Dr. Satyaranjan Bairagi
    Systems Power and Energy Materials and Manufacturing Research Group University of Glasgow Glasgow, G12 8QQ, UK, Glasgow, United Kingdom
  • Dr. Wei Li
    Division of Surface Engineering of Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
  • Prof. A Vijay Kumar, PhD
    Department of Mechanical Engineering, Raghu Engineering College, Visakhapatnam, India
  • Di Wang
    School of Mechanical and Materials Engineering, Xi'an University, Xi'an, China
  • Mounarik Mondal
    Department of Mechnanical Engineering, Kongju National University, Cheonan, South Korea
  • Dr. Yongjoo Cho
    Kyulux Inc., Fukuoka, Japan
  • Zohreh Shahnavaz
    Materials Science and Engineering School, Jiangsu University, Zhenjiang, China
  • Ramiro Escudero
    Department of Extractive Metallurgy, University of Morelia, Morelia, Mexico
  • Amel D. Hussein
    College of Dentistry, Wasit University, Kut, Iraq
  • Assist. Prof. Monalisa Char, PhD
    Department of Materials Science and Technology, Maulana Abul Kalam Azad University of Technology, Kolkata, India
  • Prof. Xiaogang You, PhD
    Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, China
  • Assist. Prof. Sunil Kumar
    Department of Electronic Science, Babasaheb Bhimrao Ambedkar Bihar University, Bihar, India
  • Ruiji Li
    School of Pharmacy, Jining Medical University, Rizhao, China
  • Dr. Jehad Kharraz
    Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
  • Abeer Adel Salih
    Department of Mechanical and Manufacturing Engineering, National University of Malaysia, Selangor, Malaysia
  • Yang Li
    Bingtuan Energy Development Institute, Shihezi University, Shihezi, China
  • Zunaida Zakaria
    Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis, Arau, Malaysia
  • Assoc. Prof. Vinícius Veloso
    Department of Mechanical Engineering, Centro Universitário UNA, Belo Horizonte, Brazil
  • Japhet Tiegoum Wembe
    Department of Civil Engineering, CY Cergy Paris University, Cergy, France
  • Dr. Mina Namvari
    Sabancı University Nanotechnology Research and Application Center, Sabancı University, Istanbul, Turkey
  • K.O. Low
    Faculty of Engineering and Technology, Multimedia University, Melaka, Malaysia
  • Prof. Sanjeev Kumar Verma, PhD
    Department of Civil Engineering, School of Engineering and Technology, Sanjeev Agrawal Global Educational University, Bhopal, India
  • Dr. Xiangyang Lou
    Department of Environment, Southern University of Science and Technology, Shenzhen, China
  • Assoc. Prof. Evando Araujo
    Department of Materials Science, Federal University of São Francisco Valley, Juazeiro, Brazil
  • Qian Zhang
    School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, China
  • Aizuddin Supee
    Department of Energy Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia