International Journal of Mechanical Engineering and Applications

Volume 5, Issue 5, October 2017

  • Benefit of Compressor Washing on Power Output in Oil and Gas Applications

    Enyia James Diwa, Dodeye Ina Igbong, Archibong Eso Archibong, Ukpabio Ekpeyong Eyo

    Issue: Volume 5, Issue 5, October 2017
    Pages: 239-246
    Received: 2 August 2017
    Accepted: 14 August 2017
    Published: 30 August 2017
    Downloads:
    Views:
    Abstract: Fouling in gas turbine compressor has proven to be inevitable, but online compressor washing has shown to be promising in mitigating the effects of fouling. Despite the several researches and experiments carried out in laboratories or actual engine operations as presented in literatures, the economic benefit is always very important. This research ... Show More
  • Experimental Studies on Micropumps Using Rotational/Reciprocating Motions of Magnetic Material Balls

    Hiroshige Kumamaru, Yoshio Nomura, Fuma Sakata, Hayata Fujiwara, Kazuhiro Itoh

    Issue: Volume 5, Issue 5, October 2017
    Pages: 247-252
    Received: 10 July 2017
    Accepted: 21 July 2017
    Published: 18 September 2017
    Downloads:
    Views:
    Abstract: In application of micropumps to new fields in chemistry, biology, medical science and others, smaller sizes are supposed to be important rather than higher pump performance. In this study, considering from such a view point, micropumps using rotational and reciprocating motions of magnetic material balls were proposed and studied experimentally. Th... Show More
  • Design, Manufacture and Performance Evaluation of a Soybean Paddle Thresher with a Blower

    Philip Yamba, Enoch Asuako Larson, Zakaria Issaka, Anthony Akayeti

    Issue: Volume 5, Issue 5, October 2017
    Pages: 253-258
    Received: 15 July 2017
    Accepted: 21 July 2017
    Published: 25 September 2017
    Downloads:
    Views:
    Abstract: Soybeans threshing is traditionally done by hand beating with a wooden stick on a hard surface which is a drudgeries operation which leads to time-consuming, grain damage and grain loss due to shattering for small-scale farmers. Therefore, a soybeans manual thresher (Pedal operated) machine attached to a blower was designed, manufactured and its pe... Show More
  • Numerical Investigation of Heat Transfer of CuO Nanofluid Using Eulerian-Eulerian Two Phase Model

    Farhad Abbassi Amiri, Mohsen Nazari, Mohammad Mohsen Shahmardan

    Issue: Volume 5, Issue 5, October 2017
    Pages: 259-268
    Received: 8 September 2017
    Accepted: 20 September 2017
    Published: 26 September 2017
    Downloads:
    Views:
    Abstract: In this study, laminar forced convection of CuO nanofluid is numerically investigated in sudden expansion microchannel with expansion ratio of 3:1 and isotherm walls. The importance and developments of microfluidic devices, like expansion microchannel, has caused that the investigation of the flow and the heat transfer of nanofluid in sudden expans... Show More
  • Factors Affecting Technological Growth in Nigeria and the Way Forward

    Isioto Nte Nathaniel, Philip-kpae Friday O., Dickson Rachael

    Issue: Volume 5, Issue 5, October 2017
    Pages: 269-274
    Received: 16 May 2017
    Accepted: 11 July 2017
    Published: 20 October 2017
    Downloads:
    Views:
    Abstract: This paper spotlights Nigeria’s technological antecedence and the factors affecting Nigeria’s technological growth with a view to proffering solution for a robust technological and industrialized structural framework as a way forward to achieving sustainable technological growth. Majorly, due to relegation of useful indigenous technology as a resul... Show More
  • Computation of Micro-Strains in Cold Formed Steels- FEA Approach

    Assad Anis

    Issue: Volume 5, Issue 5, October 2017
    Pages: 275-281
    Received: 24 December 2016
    Accepted: 6 January 2017
    Published: 30 October 2017
    Downloads:
    Views:
    Abstract: This paper describes the computations of micro-strains at inner corner of cold formed rectangular hollow sections (CFRHS) made up of structural steels using finite element analysis. In order to obtain the micro-strains, distortion test is simulated by modeling two-dimensional structural steel tubes in ANSYS software. Two dimensional linear static a... Show More
  • Feature Estimation and Registration of Point Clouds in Reverse Engineering

    Hongguang Zhu, Xu Zhang

    Issue: Volume 5, Issue 5, October 2017
    Pages: 282-286
    Received: 24 March 2017
    Accepted: 8 April 2017
    Published: 30 October 2017
    Downloads:
    Views:
    Abstract: Cultural relic is the carrier of information, such as production, life, science and technology, art and so on. However, due to natural and man-made reasons, artifacts are often destroyed. Excavation site is the most common variety of cultural relics, the need for cultural relics repair. Because the artifacts are generally made on the rotating disk,... Show More