The corrosion of mild steel is a problem in industrial processes based on its deterioration on exposure to acids, alkalis, and salt solutions. This issue has prompted an increase in research interest in order to mitigate the harmful effects of corrosion on metals and their alloys. The thermodynamic and adsorption analysis of mild steel in 0.5M hydrochloric acid solutions via ethanol leaf extract of Phyllanthus mellerianus was investigated using weight loss and hydrogen evolution techniques. The powdered sample was extracted with ethanol and concentrated with a rotary evaporator. The phytochemical analysis reveals the presence of tannins, flavonoids, phenols, and terpenoids at reasonable percentages. The inhibition efficiency, enthalpy, enthropy, activation energy, Gibbs free energy, and adsorption isotherms were extrapolated with some models. The inhibition efficiency increased with an increase in the concentration of the extract. The values of change in Gibbs free energy obtained at 303K, 313K, and 323K were negative, indicating that the leaf extract of Phyllanthus mellerianus was strongly adsorbed on mild steel surfaces and stable at high temperatures. The enthalpy of activation ranges from 43.08kJ/mol to 80.64kJ/mol. An increase in activation energy with inhibitor concentration confirmed the physical (physisorption) adsorption mechanism for the corrosion of mild steel surfaces. The R2 values obtained from the linear regression are strongly fitted to the Langmuir and freundlich isotherms. The inhibitory effectiveness of extracts has been attributed to the presence of the hetero atoms N, O, and S present in their phytochemical composition.
| Published in | American Journal of Applied Chemistry (Volume 10, Issue 3) |
| DOI | 10.11648/j.ajac.20221003.12 |
| Page(s) | 67-75 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Adsorption, Corrosion Inhibition, Mild Steel, Phyllanthus mellerianus, Thermodynamic Parameters
| [1] | Nwosu, F. O., & Muzakir, M. M. (2016). Thermodynamic and adsorption studies of corrosion inhibition of mild steel using lignin from siam weed (Chromolaena odorata) in acid medium. J. Mater. Environ. Sci, 7 (5), 1663-1673. |
| [2] | Don-Lawson, C., Okah, R., & Orie, K. J. (2020) Synthesis and corrosion inhibition study of mild steel in 0.5 M hydrochloric acid by 1-((2-arbamoylguanidino) (furan-2-ylmethyl) urea. Direct Research Journal of Chemistry and Material Science .7 (1), 1-6. |
| [3] | James, A. O., Oforka, N. C., Abiola, O. K., & Ita, B. I. (2007). A study on the inhibition of mild steel corrosion in hydrochloric acid by pyridoxol hydrochloride. Eclética Química, 32 (3), 31-37. |
| [4] | Iroha, N. B., & James, A. O. (2018). Assessment of performance of velvet tamarind-furfural resin as corrosion inhibitor for mild steel in acidic solution. Journal of Chemical Society of Nigeria, 43 (3). |
| [5] | Orie, K. J., James, A. O., & Akaranta, O. (2015). The Corrosion Inhibition of Mild Steel in 0.5 m Phosphoric Acid and Crown Cork in Water By Folic Acid. International Journal of Science and Research (IJSR), 4, 1380-1385. |
| [6] | Ahmed, S. K., Ali, W. B., & Khadom, A. A. (2019). Synthesis and investigations of heterocyclic compounds as corrosion inhibitors for mild steel in hydrochloric acid. International Journal of Industrial Chemistry, 10 (2), 159-173. |
| [7] | Harborne, I. B (1973) Phytochemical methods: A guide to modern techniques of plant analysis. 2nd Edition, Chapman and Hall, New York, 88-185. |
| [8] | Ogbuanu, C. C., Amujiogu, S. N., Ehiri, R. C., Omaka, O. N., Lloh, M., Chime, C. C. & aneke. I. B. (2013) Phytochemical and Antibiotic Screening of phyllanthus mellerianus plant. World journal of biotechnology. 14 (2); 2148-2153. |
| [9] | Okafor, P. C., Ebenso, E. E., & Ekpe, U. J. (2010). Azadirachta indica extracts as corrosion inhibitor for mild steel in acid medium. Int. J. Electrochem. Sci, 5 (7), 978-993. |
| [10] | Oloruntoba, D. T., Abbas, J. A., & Olusegun, S. J. (2012). Water hyacinth (eichhornia crassipes) leaves extract as corrosion Inhibitor for AISI 1030 steel in sea water. Proceedings of 4th West Africa Built Environment Research (WABER), 1131-1140. |
| [11] | Orie, K. J., & Christian, M. (2015). The Corrosion Inhibition of Aluminium Metal In 0.5 M Sulphuric Acid Using Extract Of Breadfruit Peels. International Research Journal of Engineering and Technology (IRJET), 2 (8), 2395-0072. |
| [12] | Hussin, M. H., Kassim, M. J., Razali, N. N., Dahon, N. H., & Nasshorudin, D. (2016). The effect of Tinospora crispa extracts as a natural mild steel corrosion inhibitor in 1 M HCl solution. Arabian Journal of Chemistry, 9, S616-S624. |
| [13] | Hassan, K. H., Khadom, A. A., & Kurshed, N. H. (2016). Citrus aurantium leaves extracts as a sustainable corrosion inhibitor of mild steel in sulfuric acid. south african journal of chemical engineering, 22, 1-5. |
| [14] | Abeng, F. E., Idim, V. D., & Nna, P. J. (2017). Kinetics and thermodynamic studies of corrosion inhibition of mild steel using Methanolic extract of erigeron floribundus (Kunth) in 2 M HCl solution. World news of natural sciences, 10. |
| [15] | Umoren, S. A., Ogbobe, O., Igwe, I. O., & Ebenso, E. E. (2008). Inhibition of mild steel corrosion in acidic medium using synthetic and naturally occurring polymers and synergistic halide additives. Corrosion science, 50 (7), 1998-2006. |
| [16] | Fouda, A. S., Fouda, A. E. A. S., Abo-shohba, R., Husien, W. M., & Ahmed, E. S. (2016). Chemical and electrochemical study on the effectively of Melilotus officinalis extract as save corrosion inhibitor for aluminium in 1 M hydrochloric acid solutions. Global Journal of Research In Engineering. |
| [17] | Okewale, A. O., & Adesina, O. A. (2020). Kinetics and thermodynamic study of corrosion inhibition of mild steel in 1.5 M HCl medium using cocoa leaf extract as inhibitor. Journal of Applied Sciences and Environmental Management, 24 (1), 37-47. |
| [18] | Nwanonenyi, S. C., Madufor, I. C., Uzoma, P. C., & Chukwujike, I. C. (2016). Corrosion inhibition of mild steel in sulphuric acid environment using millet starch and potassium iodide. International research journal of pure and applied chemistry, 12 (2), 1-15. |
| [19] | Alhaffar, M. T., Umoren, S. A., Obot, I. B., & Ali, S. A. (2018). Isoxazolidine derivatives as corrosion inhibitors for low carbon steel in HCl solution: experimental, theoretical and effect of KI studies. Rsc Advances, 8 (4), 1764-1777. |
| [20] | James, A. O. & Akarenta, O. (2002). Corrision Inhibition of Aluminum in Hydrochloric Acid Solution by the Action Extract of Red Onion Skin, African Journal of Fine & Applied Chemistry, 12, 262 – 268. |
| [21] | Zakir Hossain, S. M., Kareem, S. A., Alshater, A. F., Alzubair, H., Razzak, S. A., & Hossain, M. M. (2020). Effects of cinnamaldehyde as an eco-friendly corrosion inhibitor on mild steel in aerated NaCl solutions. Arabian Journal for Science and Engineering, 45 (1), 229-239. |
| [22] | Akinbulumo, O. A., Odejobi, O. J., & Odekanle, E. L. (2020). Thermodynamics and adsorption study of the corrosion inhibition of mild steel by Euphorbia heterophylla L. extract in 1.5 M HCl. Results in Materials, 5, 100074. |
| [23] | Quraishi, M. A., & Shukla, S. K. (2009). Poly (aniline-formaldehyde): a new and effective corrosion inhibitor for mild steel in hydrochloric acid. Materials Chemistry and Physics, 113 (2-3), 685-689. |
| [24] | Shabani-Nooshabadi, M., & Ghandchi, M. S. (2015). Introducing the Santolina chamaecyparissus extract as a suitable green inhibitor for 304 stainless steel corrosion in strong acidic medium. Metallurgical and Materials Transactions A, 46 (11), 5139-5148. |
| [25] | Sivakumar, K., Mohan, N. K., & Sivaraman, B. (2012). Performance Analysis on Briquetting Bio Mass with Different Size in 10 kW Down Draft Gasifier. Procedia engineering, 38, 3824-3832. |
APA Style
Okechukwu Paul Nsude, Kingsley John Orie. (2022). Thermodynamic and Adsorption Analysis of Corrosion Inhibition of Mild Steel in 0.5M HCl Medium via Ethanol Extracts of Phyllanthus mellerianus. American Journal of Applied Chemistry, 10(3), 67-75. https://doi.org/10.11648/j.ajac.20221003.12
ACS Style
Okechukwu Paul Nsude; Kingsley John Orie. Thermodynamic and Adsorption Analysis of Corrosion Inhibition of Mild Steel in 0.5M HCl Medium via Ethanol Extracts of Phyllanthus mellerianus. Am. J. Appl. Chem. 2022, 10(3), 67-75. doi: 10.11648/j.ajac.20221003.12
AMA Style
Okechukwu Paul Nsude, Kingsley John Orie. Thermodynamic and Adsorption Analysis of Corrosion Inhibition of Mild Steel in 0.5M HCl Medium via Ethanol Extracts of Phyllanthus mellerianus. Am J Appl Chem. 2022;10(3):67-75. doi: 10.11648/j.ajac.20221003.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajac.20221003.12,
author = {Okechukwu Paul Nsude and Kingsley John Orie},
title = {Thermodynamic and Adsorption Analysis of Corrosion Inhibition of Mild Steel in 0.5M HCl Medium via Ethanol Extracts of Phyllanthus mellerianus},
journal = {American Journal of Applied Chemistry},
volume = {10},
number = {3},
pages = {67-75},
doi = {10.11648/j.ajac.20221003.12},
url = {https://doi.org/10.11648/j.ajac.20221003.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.20221003.12},
abstract = {The corrosion of mild steel is a problem in industrial processes based on its deterioration on exposure to acids, alkalis, and salt solutions. This issue has prompted an increase in research interest in order to mitigate the harmful effects of corrosion on metals and their alloys. The thermodynamic and adsorption analysis of mild steel in 0.5M hydrochloric acid solutions via ethanol leaf extract of Phyllanthus mellerianus was investigated using weight loss and hydrogen evolution techniques. The powdered sample was extracted with ethanol and concentrated with a rotary evaporator. The phytochemical analysis reveals the presence of tannins, flavonoids, phenols, and terpenoids at reasonable percentages. The inhibition efficiency, enthalpy, enthropy, activation energy, Gibbs free energy, and adsorption isotherms were extrapolated with some models. The inhibition efficiency increased with an increase in the concentration of the extract. The values of change in Gibbs free energy obtained at 303K, 313K, and 323K were negative, indicating that the leaf extract of Phyllanthus mellerianus was strongly adsorbed on mild steel surfaces and stable at high temperatures. The enthalpy of activation ranges from 43.08kJ/mol to 80.64kJ/mol. An increase in activation energy with inhibitor concentration confirmed the physical (physisorption) adsorption mechanism for the corrosion of mild steel surfaces. The R2 values obtained from the linear regression are strongly fitted to the Langmuir and freundlich isotherms. The inhibitory effectiveness of extracts has been attributed to the presence of the hetero atoms N, O, and S present in their phytochemical composition.},
year = {2022}
}
TY - JOUR T1 - Thermodynamic and Adsorption Analysis of Corrosion Inhibition of Mild Steel in 0.5M HCl Medium via Ethanol Extracts of Phyllanthus mellerianus AU - Okechukwu Paul Nsude AU - Kingsley John Orie Y1 - 2022/05/31 PY - 2022 N1 - https://doi.org/10.11648/j.ajac.20221003.12 DO - 10.11648/j.ajac.20221003.12 T2 - American Journal of Applied Chemistry JF - American Journal of Applied Chemistry JO - American Journal of Applied Chemistry SP - 67 EP - 75 PB - Science Publishing Group SN - 2330-8745 UR - https://doi.org/10.11648/j.ajac.20221003.12 AB - The corrosion of mild steel is a problem in industrial processes based on its deterioration on exposure to acids, alkalis, and salt solutions. This issue has prompted an increase in research interest in order to mitigate the harmful effects of corrosion on metals and their alloys. The thermodynamic and adsorption analysis of mild steel in 0.5M hydrochloric acid solutions via ethanol leaf extract of Phyllanthus mellerianus was investigated using weight loss and hydrogen evolution techniques. The powdered sample was extracted with ethanol and concentrated with a rotary evaporator. The phytochemical analysis reveals the presence of tannins, flavonoids, phenols, and terpenoids at reasonable percentages. The inhibition efficiency, enthalpy, enthropy, activation energy, Gibbs free energy, and adsorption isotherms were extrapolated with some models. The inhibition efficiency increased with an increase in the concentration of the extract. The values of change in Gibbs free energy obtained at 303K, 313K, and 323K were negative, indicating that the leaf extract of Phyllanthus mellerianus was strongly adsorbed on mild steel surfaces and stable at high temperatures. The enthalpy of activation ranges from 43.08kJ/mol to 80.64kJ/mol. An increase in activation energy with inhibitor concentration confirmed the physical (physisorption) adsorption mechanism for the corrosion of mild steel surfaces. The R2 values obtained from the linear regression are strongly fitted to the Langmuir and freundlich isotherms. The inhibitory effectiveness of extracts has been attributed to the presence of the hetero atoms N, O, and S present in their phytochemical composition. VL - 10 IS - 3 ER -
Information
Email: